Assessment of the effect of technical and management characteristics on the frequency of release from piping: An application to a gas storage facility

The assessment of the frequencies of release from piping due to losses of containment is an essential step in the preparing Safety Reports, drawn up as required by the so-called “Seveso” Directive. These are usually calculated starting from the frequencies of random rupture included in international databases and are not plant-specific, furthermore, the quantification of the effect of the safety management system of the facility is not easy. A simple and flexible approach quantifying technical and management characteristics of the plant has been proposed by Milazzo and co-workers in 2010; it is based on the modification of the frequency taken from literature, through the use of the percentages of failure causes actually possible in that plant, and the judgment about their management. The data about the failure causes are taken from the literature and modified by using corrective factors to adapt them to the industrial context. To make possible the application of the method to a large number of major-hazard industry types, some aspects of the approach needed to be improved; these have been identified during a development project coordinated by RINA Consulting, on behalf of Saipem, with the collaboration of the University of Messina. The improvement of the approach focused on two main points, the development of a method to calculate the corrective factors for the failure causes associated with corrosion and erosion phenomena and the strengthening of the methodology for the formulation of the judgment about the safety management. This paper illustrates the fully improved method, as well as an application to a typical gas storage plant.     

Advancing voluntary chemical governance? The case of the Swedish textile industry dialogue

Voluntary environmental governance is a widely used policy approach that has been criticized for its lack of effectiveness. This raises fundamental questions about how to design processes that can advance voluntary programmes in a way that makes them more successful. In this paper, we analyse a government-initiated dialogue process to phase out hazardous chemicals through voluntary action by the Swedish textile industry. The analysis shows that information transfer primarily motivated business participation, while consumer pressure, regulatory threats and traditions of government–business cooperation played minor roles. The institutional design of the dialogue ensured close interaction within a homogeneous group, but collective actions were limited by disagreement about the problems to be addressed, prior unilateral environmental commitments by leading companies, and ambivalent engagement. This case provides valuable insights into the effect of institutional design on the actual interplay between business and government and its effects on voluntary governance.     

Significance of iron compounds in chemical and electro‐oxidation treatment of sugar industry wastewater: Batch reaction

Industrialization plays a major role in a nation's growth. However, with an increase in industrial activities, pollution levels are also increasing. Among all industries, the sugar‐processing industry is one that requires large amounts of water to process the sugar, and, consequently, it discharges large amounts of water as effluent. Highly polluted wastewater brings changes to the physicochemical characteristics of the surrounding environment. Iron compounds have had a significant impact when they are used in wastewater treatment in various applications, including when they are used to minimize the pollution levels in sugar industry wastewater (SIWW). To minimize the pollutant levels from SIWW, iron compounds have been key for uses in treatments involving chemical and electro‐oxidation. Two different methodologies of electrocoagulation and chemical coagulation have been used to treat SIWW. In electrocoagulation, an iron plate is used as an electrode material under specific operating conditions. Ferrous sulfate and ferric chloride have been used as chemical coagulants at various pH and mass loading levels. The use of iron metals shows an 82% reduction in chemical oxygen demand (COD) and an 84% reduction in color at the optimum condition of pH 6, an electrode distance of 20 millimeters, and a current density of 156 square centimeters. As a chemical coagulant, iron salt (ferrous sulfate) provides a reduction of 77% COD and a 91% reduction of color at pH 6 and a 40‐millimole mass loading. Electrochemical treatment using iron was found to be suitable to treat SIWW. The sludge generated after treatment can be burned or composted with the possible recovery of some of the treatment costs.     

基于风险的中国电影产业安全管理初探

随着我国电影产业的发展,各种安全事故层出不穷,电影产业的安全生产已经是一个无法回避的问题。在分析电影产业安全事故特点的基础上,结合风险预警理论,系统地探讨了电影产业安全风险管理的基本框架,对提高电影产业安全生产水平提出了建议。     

基于OPMSE与BAT的啤酒行业排放限值仿真

以OPMSE仿真计算啤酒行业排放污水中COD,BOD,NH3-N质量浓度为研究对象,查询及调研清河流域典型啤酒行业产生污水中COD,BOD,NH3-N质量浓度范围,经BAT处理后通过OPMSE的仿真计算,得出排放污水中污染物质量浓度正态分布置信区间、最佳出水及最差出水质量浓度。结果表明:置信水平为99%时,COD,BOD,NH3-N的置信区间分别为(75.83,95.95),(19.30,25.88),(5.68,6.85);最佳出水质量浓度分别为4.14 mg/L,5.36 mg/L,2.71 mg/L;最差出水质量浓度分别为20.64 mg/L,20.70 mg/L,10.86mg/L。将仿真结果与现有排放标准对比,拟定啤酒行业的污染物直接排放限值为COD=100 mg/L,BOD=30mg/L,NH3-N=8 mg/L;间接排放限值为COD=400 mg/L,BOD=80 mg/L,NH3-N=25 mg/L。     

Internal short circuit and accelerated rate calorimetry tests of lithium-ion cells: Considerations for methane-air intrinsic safety and explosion proof/flameproof protection methods

Researchers with the National Institute for Occupational Safety and Health (NIOSH) studied the potential for lithium-ion cell thermal runaway from an internal short circuit in equipment for use in underground coal mines. In this third phase of the study, researchers compared plastic wedge crush-induced internal short circuit tests of selected lithium-ion cells within methane (CH₄)-air mixtures with accelerated rate calorimetry tests of similar cells. Plastic wedge crush test results with metal oxide lithium-ion cells extracted from intrinsically safe evaluated equipment were mixed, with one cell model igniting the chamber atmosphere while another cell model did not. The two cells models exhibited different internal short circuit behaviors. A lithium iron phosphate (LiFePO₄) cell model was tolerant to crush-induced internal short circuits within CH₄-air, tested under manufacturer recommended charging conditions. Accelerating rate calorimetry tests with similar cells within a nitrogen purged 353-mL chamber produced ignitions that exceeded explosion proof and flameproof enclosure minimum internal pressure design criteria. Ignition pressures within a 20-L chamber with 6.5% CH₄-air were relatively low, with much larger head space volume and less adiabatic test conditions. The literature indicates that sizeable lithium thionyl chloride (LiSOCl₂) primary (non rechargeable) cell ignitions can be especially violent and toxic. Because ignition of an explosive atmosphere is expected within explosion proof or flameproof enclosures, there is a need to consider the potential for an internal explosive atmosphere ignition in combination with a lithium or lithium-ion battery thermal runaway process, and the resulting effects on the enclosure.     

炼油行业泄漏检测与修复技术实践研究

炼油行业排放的大气污染物主要是挥发性有机物,是形成二次污染物的重要前体物,也是引发大气环境问题的重要污染物.以天津某炼油企业泄漏检测与修复技术的工作实践为例,结合炼油行业生产装置的工艺特点,介绍在该行业开展泄漏检测与修复技术时的工作流程,包括设备和管线组件密封点位的建档、检测、泄漏点位的修复、复测以及泄漏量核算方法,对炼油行业开展泄漏检测与修复工作减少挥发性有机物无组织的排放起到借鉴作用.     

苏州市人为源氨排放清单及其分布特征

通过调研分析苏州大市范围内的农业、工业、生活及交通等相关活动水平数据,采用排放因子法建立了2013年苏州市人为源氨排放清单. 结果表明:2013年苏州市人为源氨排放总量为22 020.18 t,排放强度为3.06 t/km2;畜禽养殖、工业源、氮肥施用是苏州市氨排放的主要来源,排放量分别为8 080.99、7 103.50、4 841.23 t,共占氨排放总量的90.94%. 其中,工业源的氨排放分担率为32.25%,高于全国平均值,火电行业和化肥制造行业的氨排放占工业源排放总量的90.14%,烟气脱硝过程的氨逃逸值得关注;在畜禽源中,肉鸡和生猪是最大的氨排放源,二者排放量分别占畜禽养殖氨排放总量的42.59%和37.14%. 太仓、张家港、常熟依次为苏州市氨排放量和排放强度最大的3个地区,共占氨排放总量的69.02%,苏州市区氨排放量位列第四但排放强度最低. 空间分布特征表明,苏州市东北部氨排放较集中,中部排放量较小,周边地区特别是沿江县级市的排放量较大. 研究显示,氨排放清单的建立可为苏州市氨排放控制提供基础数据.      

A review of textile industry: Wet processing,environmental impacts,and effluent treatment methods

The word “textile” means to weave and was taken from the Latin word “texere.” Nowadays, textiles not only fulfill humankind's basic necessity for clothing, they also allow individuals to make fashion statements. As one of the oldest industries, the textile industry occupies a unique place in India. It is responsible for 14% of the total industrial manufacture in India. However, the textile industry is also considered to be one of the biggest threats to the environment. Pretreatment, dyeing, printing, and finishing operations are among the various stages of the industrial textile manufacturing process. These fabrication operations not only utilize huge quantities of power and water, they also generate considerable amounts of waste. The textile industry utilizes a number of dyes, chemicals, and other materials to impart the required qualities to the fabrics. These operations produce a significant amount of effluents. The quality of effluents is such that they cannot be put to other uses, and they can create environmental problems if they are disposed of without appropriate treatment. This review discusses different textile processing stages, pollution problems associated with these stages, and their eco‐friendly alternatives. Textile wet processing is described in detail, as it is the key process in the industry and it also generates the greatest amount of pollutants in textile processing. The environmental impact of textile effluents is discussed, as textile effluents not only impose negative effects on the quality of water and soil, they also imperil plant and animal health. In this paper, various methods for treating textile effluents are described. Discussion of physical, chemical, biological, and advanced treatment technologies of effluent treatment are included in this paper.     

基于经济普查引入EGSS统计框架的可行性分析

环境货物和服务部门(EGSS)统计框架是由欧盟统计署研究制定的、用于收集和整理环境产品与服务相关统计数据的方法,已经被联合国统计署纳入"环境经济统计体系(SEEA)"中,成为一项国际统计标准。中国的经济普查工作在数据采集方式上与EGSS具有较好的一致性,本文主要对我国的经济普查与EGSS统计框架进行比较研究,探索从经济普查表核算EGSS数据的方法和思路。结果表明:经济普查可作为常规统计口径核算EGSS数据的一个切入点,但是需要在数据连续性、行业小类划分、统计的经济指标范围方面进行衔接融合;基于经济普查数据引进EGSS统计框架可采取分阶段推进方式。