我国典型钢铁行业主要工艺环节排放颗粒物源成分谱特征

鉴于我国钢铁行业排放颗粒物源成分谱数量不足,有待更新的现状,致力于服务精细化颗粒物源解析的需求,采用稀释通道系统对武汉市某钢铁公司的3个主要工艺环节(烧结、炼钢、炼铁)排放源进行了采样.构建了3类PM_(2.5)源成分谱及3类PM_(10)成分谱,对源谱主要化学组分特征进行了研究,并与国内其他区域已有的钢铁行业源谱研究进行了对比.结果表明:(1)烧结工艺源成分谱中,SO_4~(2-)、Al和NH_4~+等含量高,PM_(2.5)源谱中质量分数依次为22. 2%、4. 5%和3. 5%,PM_(10)源谱中依次为36. 0%、5. 2%和2. 7%,炼铁工艺Fe元素含量最高,在PM_(2.5)源谱和PM_(10)源谱中分别达到28. 3%和24. 5%,炼钢工艺源谱Ca、Fe元素等为主要组分;(2)元素组分中,烧结工艺S元素含量最高,地壳元素在PM_(10)源谱中含量更高,炼铁工艺Pb、Cr等重金属含量偏高,炼钢工艺Cr富集;(3)源谱之间分歧系数的计算显示,同类工艺粗细粒径源谱相似性偏高,烧结工艺与其他两类工艺源谱之间差异性较高,炼钢工艺与炼铁工艺差异性较低.同国内其他区域研究源谱相比,发现Fe、Si和Ca等为钢铁行业排放颗粒物中标识性组分,而碳组分和SO_4~(2-)等组分特征随生产方式、除污设备等不同表现出不同特征.     

我国造纸行业清洁生产的思路及案例分析

在分析我国造纸行业的污染现状及治理现状的基础,雌出了造纸行业清洁生产的初步思路框架，在该清洁生产思路的指导下，以茂名市造纸厂为案例进行了较为详细的分析，最后，提出了我国造纸行业实施可持续发展的战略措施。     

某典型石油化工园区冬季大气中VOCs污染特征

利用TH-300B挥发性有机物(volatile organic compounds,VOCs)在线监测系统于2014年12月~2015年2月对我国某石油化工园区的VOCs进行连续在线监测.分析了其组成特征、时间变化特征、来源以及光化学活性特征.结果表明,研究区冬季大气中VOCs的混合体积分数较高,烷烃占据主导地位,占TVOCs的86.73%;TVOCs、烷烃、烯烃、芳香烃的昼夜变化特征均表现为夜间高而白天低,且烷烃、烯烃的变化与TVOCs较为一致.利用主成分分析-多元线性回归(PCA-MLR)模型解析得到5个因子,分别表征燃料挥发源、工业排放源、汽油车尾气和植物排放混合源、柴油车尾气排放源和燃料燃烧源,其贡献率分别为60.02%、8.50%、2.07%、12.21%、17.20%.利用Propy-equiv法和MIR法计算得出该研究区冬季大气中各类VOCs对臭氧生成的相对贡献率的大小均表现为烷烃烯烃芳香烃,其中环戊烷、正丁烷和1-戊烯的贡献率较高,气团光化学年龄较长.     

铬盐行业清洁生产审核探讨

铬盐行业是我国重点整治的高污染行业,推行清洁生产势在必行。文章结合实例,对铬盐行业清洁生产审核进行探讨。污染负荷最高的焙烧车间是重点审核对象;评估过程产生7个中/高费方案,综合筛选出6个可行方案,已实施或正在实施的"少钙焙烧"等6个方案使企业主要污染物铬渣排放量削减达40%,焙烧窑含铬粉尘无组织排放量减少约10%,原辅料及能源消耗均有一定程度降低。对铬盐行业清洁生产审核的探讨为铬盐企业推行清洁生产提供了范例,有利于铬盐行业的可持续发展。     

涂料制造行业挥发性有机物排放成分谱及影响

采用不锈钢采样罐对华东地区8家涂料制造企业生产车间排口进行采集,运用气相色谱-质谱联用技术（GC-MS）测定了106种VOCs组分,识别了VOCs排放特征,建立了溶剂型涂料和水性涂料VOCs排放成分谱,分析了VOCs对臭氧生成的贡献.结果表明,涂料制造行业VOCs特征组分主要为芳香烃和含氧烃,两者浓度范围在65.5%~99.9%,溶剂型涂料VOCs排放主要以芳香烃为主,占总VOCs的63.0%~94.0%;水性涂料VOCs排放主要以含氧烃为主,占总VOCs的54.5%~99.9%.间/对-二甲苯（32.4%）、乙苯（19.0%）和乙酸乙酯（12.1%）为溶剂型涂料源排放特征,乙酸乙酯（83.7%）与2-丁酮（8.0%）为水性涂料源排放特征.芳香烃和含氧烃是涂料制造行业的主要活性组分,对臭氧生成潜势（OFP）的总贡献率在92.9%~99.9%之间.源反应活性分析（SR）表明,水性涂料单位质量VOCs对臭氧的生成贡献低于溶剂型涂料,因此可显著降低臭氧的生成潜势.研究显示,针对涂料制造行业VOCs污染治理,应重点关注芳香烃和含氧烃中对臭氧生成潜势贡献较大的VOCs组分,进行源头和精细化控制.     

Low-carbon transition of iron and steel industry in China: Carbon intensity, economic growth and policy intervention

As the biggest iron and steel producer in the world and one of the highest CO₂ emission sectors, China's iron and steel industry is undergoing a low-carbon transition accompanied by remarkable technological progress and investment adjustment, in response to the macroeconomic climate and policy intervention. Many drivers of the CO₂ emissions of the iron and steel industry have been explored, but the relationships between CO₂ abatement, investment and technological expenditure, and their connections with the economic growth and governmental policies in China, have not been conjointly and empirically examined. We proposed a concise conceptual model and an econometric model to investigate this crucial question. The results of regression, Granger causality test and impulse response analysis indicated that technological expenditure can significantly reduce CO₂ emissions, and that investment expansion showed a negative impact on CO₂ emission reduction. It was also argued with empirical evidence that a good economic situation favored CO₂ abatement in China's iron and steel industry, while achieving CO₂ emission reduction in this industrial sector did not necessarily threaten economic growth. This shed light on the dispute over balancing emission cutting and economic growth. Regarding the policy aspects, the year 2000 was found to be an important turning point for policy evolution and the development of the iron and steel industry in China. The subsequent command and control policies had a significant, positive effect on CO₂ abatement.     

浙江发酵制药大气污染物排放标准制订研究

该研究分析了浙江省发酵制药行业主要大气污染物的排放状况,识别出了发酵制药行业使用的主要有机溶剂,其中丙酮、乙酸乙酯、甲醇和乙醇是该行业使用频率最高的4种有机溶剂,并得到了行业的挥发性有机污染物的成分谱。评估了发酵制药企业大气污染防治现状,并对行业大气污染防治以及环境管理等方面存在的问题进行了深入剖析。最后从发酵制药企业内部污染防治、完善行业环境监管的角度提出了发酵制药行业污染防治的基本对策和制订地方发酵制药行业大气污染物排放标准的基本思路。     

Fenton氧化去除制药企业活性污泥中AOX的效果研究

用Fenton氧化处理合成制药企业活性污泥混合液,考察了不同Fe~(2+)、H_2O_2投加量和不同反应时间下污泥与上清液中AOX(可吸附有机卤代物)的去除效果,优化了反应条件,探讨了氧化机制.结果表明,Fenton氧化的最佳条件为H_2O_2投加量0.90 mol·L~(-1),Fe~(2+)投加量0.045 mol·L~(-1)[物质的量比为:n(Fe~(2+))∶n(H_2O_2)=1∶20],反应2 h,污泥和上清液中AOX可分别去除70.7%和78.5%.GC-MS分析结果显示,污泥中含有11种有机卤代物,Fenton氧化后有8种不再检出;3种仍有检出,但浓度有所降低,去除率约为40%~50%.与此同时,污泥中对二甲苯、邻苯二甲酸二异丁酯等非有机卤代物类有毒有害有机物也得到有效去除.     

制氧企业安全评价方法探讨

本文针对制氧行业的生产特点以及安全管理情况,对作业过程中存在的危险、有害因素进行了分析,综合运用安全检查表法(SCL)与故障模式、影响及危险度分析法(FMECA)对制氧企业安全现状进行了评价,并提出了相应的对策措施.结果表明:安全检查表法简便、易于掌握、较为实用;故障模式、影响及危险度分析法对评价人员的要求较高,但可得...     

The potential for improvements in energy efficiency and CO2 emissions in the EU27 cement industry and the relationship with the capital budgeting decision criteria

This paper performs a cost-effectiveness analysis of some of the best available technologies (BAT) that can contribute to decreasing the energy consumption and CO₂ emissions in the European Union’s (EU27) cement industry. Several capital budgeting decision criteria have been used (the payback period, the net present value and the internal rate of return) to study whether or not an investment should be considered worthwhile. The results show that, independent of the capital budgeting decision criteria used, the number of cost-effective retrofitting possibilities available is large compared to the rate of improvements that the industry undertakes annually. This shows the insensitivity of the industry to financial criteria when it comes to making their investment decisions. The possible thermal energy improvement in the clinker production, if all these BATs were implemented, has been quantified to be around 10%. This achievement would place the cement industry in the upper bound of the benchmark range for clinker manufacture. However considering the delays observed nowadays in terms of diffusion of BATs in the cement industry, it requires a conducive policy environment that combines support for both technology development and to their deployment.