中空柱状生物膜载体在处理工业废水工程中的应用

本文介绍新开发的一种在污水处理中的高科技产品一高效生物膜载体,通过对其在与其他处理方式各方面择比研究过程中的高找到其特点,推广新科技。     

作业井场含油固体废弃物生物制剂法除油技术研究

采用生物制剂 (BS7# 酶 )洗涤法处理冀东油田作业井场固体废弃物 ,研究了该处理方法中制剂投加量、搅拌时间、固液比和洗涤次数对处理效果的影响 ,得到了最佳洗涤条件。并对其设备投资、处理综合成本等进行了经济效益分析。为冀东油田作业井场含油固体废弃物工业化处理提供重要依据     

环境工程剪裁技术探讨

论述了开展环境工程剪裁的必要性,介绍环境工程剪裁基本概念,分析环境工程剪裁目的和内容及会遇到的阻碍,最后指出了开展环境工程剪裁应具备的条件。     

农业技术的综合评价指标初探

为了对农业技术进行推广前景预测或推广后的效益评估，建议采用生物学的合理性、技术的可行性、经济的有利性、生态学的持续性和社会的可接受性作为综合评价的原则．并提出了相应的定量比评价指标体系。     

Protective effect of weak pulsed magnetic fields on early ontogeny of tugun Coregonus tugun (Pallas) under conditions of chronic oil pollution

The state of internal organs in tugun larvae was analyzed histologically in the intact (control) group, the group treated with a water-soluble oil fraction (WSOF) in fivefold excess over the maximum allowable concentration, and the group exposed in a weak pulsed magnetic field at the stage of hatching, prior to treatment with WSOF. Larvae of the second group had severe pathologies of inner organs that caused 100% mortality before the age of 15 days, but no pathomorphological changes in the organs of larvae and juvenile fish of the third group were revealed for up to 40 days. Probable causes of high resistance to the toxic agent in fish of the experimental group are discussed.     

液氯的清洁生产工艺

对氨盐法、氟利昂法和高温高压法生产液氯的3种生产工艺流程、工艺特点进行了具体分析，指出了高温高压清洁生产工艺不仅经济而且环保，是企业生产液氯产品的必由之路。     

陆相沉积盆地二氧化碳地质储存评价技术探讨

二氧化碳的地质储存是减少二氧化碳向大气环境排放、控制全球气候变暖的重要措施。本文针对陆相沉积盆地的CO2地质储存的储层特征、储存机理、水岩作用、安全性、适宜性、场地勘察、监测技术和经济效益等方面的研究内容与评价技术进行了探讨,以为我国未来利用二氧化碳地质储存技术减少二氧化碳排放提供技术支撑。     

铝合金蒙皮光固化胶接修补疲劳性能实验研究

光固化胶接修补是一项应急快速修补新技术,为检验和提高修补疲劳强度,以LY-12铝合金裂纹板为修补对象,进行了光固化修补与传统的铆接修补拉伸疲劳对比实验。实验采用等幅高频加载和按某型飞机机翼疲劳载荷谱加载2种方法,结果表明,全宽度光固化胶接修补等幅高频疲劳寿命和载荷谱疲劳寿命与等强度铆接修补相比分别延长了35.37%和9.00%。     

Integration of biological method and membrane technology in treating palm oil mill e uent

Palm oil industry is the most important agro-industry in Malaysia, but its by-product–palm oil mill e uent (POME), posed a great threat to water environment. In the past decades, several treatment and disposal methods have been proposed and investigated to solve this problem. A two-stage pilot-scale plant was designed and constructed for POME treatment. Anaerobic digestion and aerobic biodegradation constituted the first biological stage, while ultrafiltration (UF) and reverse osmosis (RO) membrane units were combined as the second membrane separation stage. In the anaerobic expanded granular sludge bed (EGSB) reactor, about 43% organic matter in POME was converted into biogas, and COD reduction e ciency reached 93% and 22% in EGSB and the following aerobic reactor, respectively.With the treatment in the first biological stage, suspended solids and oil also decreased to a low degree. All these alleviated the membrane fouling and prolonged the membrane life. In the membrane process unit, almost all the suspended solids were captured by UF membranes, while RO membrane excluded most of the dissolved solids or inorganic salts from RO permeate. After the whole treatment processes, organic matter in POME expressed by BOD and COD was removed almost thoroughly. Suspended solids and color were not detectable in RO permeate any more, and mineral elements only existed in trace amount (except for K and Na). The high-quality e uent was crystal clear and could be used as the boiler feed water.