Self-Rated Physical Loads of Work Tasks Among Firefighters

Objectives. The present study sought to identify firefighters’ rated physical demands for the most frequently occurring work tasks and to determine if the ratings differed between full-time and part-time firefighters to help create a basis for the development of physical employment tests for firefighters. Methods. An extensive questionnaire was completed by 125 and 68 firefighters in 2000 and 2010, respectively. The data were analysed with the Mann-Whitney U test and binominal test and ranked on the basis of the responses in each category. Results. Significant differences were seen between the full- and part-time firefighters. The work tasks rated as the most physically strenuous in terms of aerobic fitness, muscle strength, work posture and body control by most respondents were smoke diving upstairs (carrying a hose), victim rescue in different ways, carrying a stretcher over terrain and pulling a hose. Conclusions. Physically strenuous work tasks should be included in the end-point performance variables used to select physical performance tests for firefighters. The part-time firefighters with no experience in several of the work tasks suggests that work-related exercises are important if both groups of firefighters are expected to do similar work.     

Biodegradability of PMMA Blends with Some Cellulose Derivatives

High polymer blends of Polymethyl methacrylate (PMMA) with cellulose acetate (CA) and Cellulose acetate phthalate (CAP) of varying blend compositions have been prepared to study their biodegradation behavior and blend miscibility. Films of PMMA–CA, and PMMA–CAP blends have been prepared by solution casting using Acetone and Dimethyl formamide(DMF) as solvents respectively. Biodegradability of these blends has been studied by four different methods namely, soil burial test, enzymatic degradation, and degradation in phosphate buffer and activated sludge degradation followed by water absorption tests to support the degradation studies. Degradation analysis was done by weight loss method. The results of all the tests showed sufficient biodegradability of these blends. Degradability increased with the increase in CA and CAP content in the blend compositions. The miscibility of PMMA–CA and PMMA–CAP blends have been studied by solution viscometric and ultrasonic methods. The results obtained reveal that PMMA forms miscible blends with either CA or CAP in the entire composition range. Miscibility of the blends may be due to the formation of hydrogen bond between the carbonyl group of PMMA and the free hydroxyl group of CA and CAP.     

Recovery of copper from contaminated soil by flushing

In this work the development of a process for the recovery of copper from contaminated industrial soils is presented. Experimental tests on a standard soil contaminated with a solution of copper chloride were carried out. The metal was extracted from the contaminated soil by flushing with a 0.1 M aqueous solution of an ethylenediaminetetraacetic acid (EDTA) sodium salt. A maximum copper extraction efficiency of about 60% was observed. Copper was then separated from the extracted solution by precipitation with sodium hydroxide after addition of ferric sulfate.     

Social network analysis and valid Markov chain Monte Carlo tests of null models

Analyses of animal social networks derived from group-based associations often rely on randomisation methods developed in ecology (Manly, Ecology 76:1109–1115, 1995) and made available to the animal behaviour community through implementation of a pair-wise swapping algorithm by Bejder et al. (Anim Behav 56:719–725, 1998). We report a correctable flaw in this method and point the reader to a wider literature on the subject of null models in the ecology literature. We illustrate the importance of correcting the method using a toy network and use it to make a preliminary analysis of a network of associations among eagle rays.

Bioaccessibility of metals in soils: comparison between chemical extractions and in vitro tests

It is well-known that the total metal content in soils is not a good indicator of their harmful effects, leading to an overestimation of risks. Toxicological and environmental hazards depend on the chemical species and on its bioavailability to target organisms. Because a good estimation of bioavailability is difficult, a good compromise is to assess bioaccessibility, defined as the maximum amount of a pollutant which is potentially absorbable by a target organism. This study presents a comparison of different strategies to measure metal bioaccessibility in soils. Three procedures were applied to real soil samples with different levels of metal contamination: pseudo-total metal attack, selective sequential extractions and in vitro tests (deliberately developed to simulate human or mammals digestion). Considering the first step of the selective extraction procedure, which can provide the bioaccessible fraction for deposit-feeder organisms, data obtained for each metal were lower than those obtained from in vitro tests. Therefore, it is possible to highlight that this extraction tends to underestimate metal bioaccessibility in soils for humans, while in vitro tests certainly will overestimate bioaccessibility for organisms as invertebrates. If the sum of first and second step of sequential procedure is considered, results are quite similar to those obtained from in vitro tests, but this kind of procedure would require two days of work rather than a few hours required to perform an in vitro test. Results highlight the diversity among the differently defined bioaccessible fractions and the need to apply the most suitable procedure depending on the target organism.     

Oil-Induced environmental Kuznets curve in organization of petroleum exporting countries (OPEC)

This study investigates the environmental Kuznets curve (EKC) hypothesis in 10 of the Organization of Petroleum Exporting Countries (OPEC). To realize the study’s aims a time series model is built based on the period 1977–2008, utilizing the ecological footprint as an environmental indicator and income, labour, capital, oil consumption and oil price as economic indicators. Employing the Autoregressive Distributed Lag (ARDL) approach, by comparing the short and long-run income elasticities, the EKC hypothesis is present in six OPEC countries namely Algeria, Iraq, Venezuela, Nigeria, Qatar and Kuwait. Moreover, the Toda–Yamamoto–Dolado–Lütkepohl (TYDL) causality tests outcome show that, after oil consumption, the most significant factors in increasing ecological footprint are labor and capital. This implies the relocation of pollution intensive industries to almost all of the OPEC countries. However, oil prices reduce environmental damage by its negative effect on the ecological footprint. From the outcome of this study it is important for the investigated countries to reduce their consumption of fossil fuel energy since it represents an important source of pollution. This can be achieved by allocating more labor and capital in projects and investments on renewable energy, energy efficiency and energy saving.     

Study on recycled asphalt concrete for use in surface course in airport pavement

This research investigated the possibility of using recycled asphalt concrete as surface course in airport pavement. The basic properties of recycled asphalt binder after short- and long-term aging were firstly tested and compared with those of the virgin asphalt. Then, a series of laboratory tests were performed to evaluate the performance of recycled asphalt concrete (containing 40% and 70% RAP), in which the HMA mixture without RAP was used as a control. Furthermore, an experimental pavement consisting of three sections (corresponding to 0%, 40% and 70% RAP content) was constructed to verify the laboratory test results. These results indicated that the recycled asphalt could achieve the similar properties against long-term aging as virgin asphalt. Recycled asphalt concrete containing 40% RAP could be used as surface course in airport pavement as it exhibited similar performance as control mixture both from the laboratory and experimental pavement test results. On the contrary, recycled asphalt concrete containing 70% RAP was not recommended as its fatigue property was much poorer compared with that of virgin asphalt mixture.     

道路车辆电气和电子设备样品在振动冲击等动力学试验中的安装

在试验方法和要求标准化后,振动冲击等动力学试验中的安装问题是决定试验是否合理和试验成败的关键要素。道路车辆电子元件和设备型样品的动力学试验是考核样品安装在车辆上使用条件下的适用性。振动试验还叠加了温度和温度变化环境,条件尤为复杂严酷。文内介绍了动力学试验中的安装需要考虑的技术要素,为试验实施中妥善合理地进行样品安装提供支持.     

改性沸石对2,4-二氯苯酚的去除作用

采用溴化十六烷基三甲铵(HDTMAB)制备改性沸石,在与天然沸石对比的基础上,研究了改性沸石在动态条件下去除2,4-DCP的效果。并对影响去除率的主要因素,包括沸石粒径、进水浓度,进水流速,沸石用量,进水pH值等进行研究。结果表明,细粒改性沸石在pH2.5左右时处理低浓度2,4-DCP溶液时,能取得较好的去除效果,流速较低时去除率最高可达80%以上。     

高强钢绞线-聚合物砂浆加固低强度砖砌体的试验研究

提出了采用高强钢绞线-聚合物砂浆技术对低强度砖墙进行抗震加固的方法,通过一片采用高强钢铰线-聚合物砂浆面层加固的墙体和一片未加固的对比墙体的低周反复荷载试验,对该加固方法进行了检验。详细地分析了这两片墙体的破坏形态、极限承载力、滞回特性、耗能能力及刚度退化等抗震性能,并提出了加固墙体的抗剪承载力计算公式。研究结果表明,高强钢绞线-聚合物砂浆加固方法能有效地提高墙体的极限承载力,改善墙体的延性和刚度退化,并提高墙体的能量消耗能力,从而提高墙体的抗震性能。