不同环境体系下锂离子电池热失控特性实验研究

针对锂离子电池热失控引发的航空运输安全问题,自主设计并搭建锂离子电池热失控灾害演化及危险性分析实验平台。在敞开和密封环境体系下,对电加热触发荷电量(State of Charge,SOC)为0%、50%和100%的18650型锂离子电池热失控规律进行了实验研究。观察单体锂离子电池在敞开和密封体系中的热失控现象,并记录单体锂离子电池热失控时间、温度峰值及相应的温度变化。数据结果显示,相比敞开体系,密封体系有效的延缓了锂离子电池发生热失控的时间,并降低了锂离子热失控时释放的能量,为锂离子电池的航空运输安全性研究提供了理论依据和工程技术参考。     

Experimental study on the synergistic inhibition effect of nitrogen and ultrafine water mist on gas explosion in a vented duct

In this study, in order to research the synergistic inhibition effect of nitrogen and ultrafine water mist on gas explosion in a vented duct, a semi-confined transparent chamber was designed with the size of 120 × 120 × 840 mm, and the experiments were carried out with stoichiometric methane/air premixed mixture (fraction of methane: 9.5%), adding different fractions of nitrogen and ultrafine water mist. The experimental results showed the following: The combination of nitrogen and ultrafine water mist had a synergistic inhibiting effect on methane/air explosion, which was preferable to the single use of any kind. With the increase of spraying time of water mist and fraction of nitrogen, the initial shape of the explosion flame became snakelike, and at the same time the peak flame propagation speed and peak overpressure decreased significantly. When the nitrogen fraction was increased to 10% and the mist spraying time was increased to 2min, synergistic inhibiting effect on overpressure was high efficient. However, with the increase of spraying time of water mist and fraction of nitrogen going on, the amount of increase of explosion inhibition efficiency was gradually reduced.     

高压输电系统对通信局(站)危险影响中地电流系数的确定

高压输电系统发生接地短路故障时,会产生一个地电位升,对通信局(站)会危险影响,为了计算这个危险影响的大小,首先能够准确的计算出高压输电系统的地电流系数。本文论述了高压输电系统对通信局(站)危险影响中地电流系数的确定,介绍了地电流系数的定义,并分析了不同危险情况下地电流系数的计算。     

Bacterial toxicity testing and antibacterial activity of parabens

Parabens are used because of their antimicrobial effects, yet they have multiple adverse effects. The aim of this work was to evaluate the bactericidal activity and bacterial toxicity of the most common parabens: methylparaben, ethylparaben, propylparaben, isopropylparaben, butylparaben, isobutylparaben and phenylparaben. The bactericidal action was evaluated by means of the dilution-neutralization method against Escherichia coli and Staphylococcus aureus, and the biotest of inhibition of growth of E. coli was applied for the bacterial toxicity assay. Bactericidal concentrations were reached only for propylparaben, butylparaben and isobutylparaben. The toxicity study showed methylparaben to be the least toxic, whereas the most toxic one was phenylparaben. It can be concluded that the disinfectant activity of the parabens studied is insignificant against S. aureus and E. coli. Acute toxicity is very low, and the inhibitory effect is weak. Our results provide information about the risk–benefit balance of parabens use.     

A hybrid decision-making approach based on FCM and MOORA for occupational health and safety risk analysis

IntroductionWith the development of industries and increased diversity of their associated hazards, the importance of identifying these hazards and controlling the Occupational Health and Safety (OHS) risks has also dramatically augmented. Currently, there is a serious need for a risk management system to identify and prioritize risks with the aim of providing corrective/preventive measures to minimize the negative consequences of OHS risks. In fact, this system can help the protection of employees’ health and reduction of organizational costs. Method: The present study proposes a hybrid decision-making approach based on the Failure Mode and Effect Analysis (FMEA), Fuzzy Cognitive Map (FCM), and Multi-Objective Optimization on the basis of Ratio Analysis (MOORA) for assessing and prioritizing OHS risks. After identifying the risks and determining the values of the risk assessment criteria via the FMEA technique, the attempt is made to determine the weights of criteria based on their causal relationships through FCM and the hybrid learning algorithm. Then, the risk prioritization is carried out using the MOORA method based on the decision matrix (the output of the FMEA) and the weights of the criteria (the output of the FCM). Results: The results from the implementation of the proposed approach in a manufacturing company reveal that the score at issue can overcome some of the drawbacks of the traditional Risk Priority Number (RPN) in the conventional FMEA, including lack of assignment the different relative importance to the assessment criteria, inability to take into account other important management criteria, lack of consideration of causal relationships among criteria, and high dependence of the prioritization on the experts’ opinions, which finally provides a full and distinct risk prioritization.     

Water saving effect on integrated water resource management

This study proposes an improved integrated water resource management (IWRM), in which water conservation was analyzed for the entire water use process. A multi-objective optimization method was applied to optimize the IWRM, which investigated the reduction of freshwater consumption and the total water supply cost. Customer's preference for saving water and an end use analysis (EUA) was applied in the water conservation analysis. Taking Tianjin as the study area, a reduction in customer's economic pressure (EP) was utilized to evaluate the degree of the customer's preference for saving water. The results revealed that agriculture had a greater preference for saving water than other sectors, where as the public had the weakest motivation for saving water. Improving the transportation method could contribute 62.1% of the total water savings in the agriculture sector. The optimization of the IWRM demonstrated that the local freshwater savings would be 21.5%, and the total cost for water supplies would decrease by 13%. However, a government subsidy of 87.5 million Yuan would be needed. Additionally, by analyzing the change in the amount of water savings affected by water price, the appropriate water price increase range was suggested to be 1.5–1.7 times the original price.     

PLC控制系统在钢渣热焖工艺中的应用

利用PLC控制系统,实现在钢渣热焖工艺中的恒压供水和钢渣热焖定时定量喷水的自动控制要求,具有国际先进水平,取得了良好的经济效益、社会效益和环境效益.     

山东省临沂市土壤有机氯农药滴滴涕残留量与空间分布特征

通过对临沂市全区表层土壤每36 km2进行样品收集,测试分析了DDTs、Org C、N等指标,主要研究了区域表层土壤DDTs的残留现状、组成和来源、影响因素、空间分布和环境质量特征.结果表明,调查区表层土壤中DDTs检出率为71.75%,平均含量为0.035μg·g-1;检出样品中p,p'-DDT和p,p'-DDE为主要残留物,平均残留分别为0.033μg·g-1和0.010μg·g-1,分别占检出样的60.99%和34.62%.DDTs降解率指示区域58%表层土壤为新近输入区,新近输入区在调查区中南部分布尤为明显;而p,p'-DDD/p,p'-DDE指示区域DDTs降解以氧化环境为主,o,p'-DDT/p,p'-DDT指示71.37%区域土壤DDTs输入可能与工业级DDTs有关.相关分析表明,影响土壤DDTs分布的外在因素包括土壤Org C、N、C和p H等指标,且DDTs中p,p'-DDT组分占比越高,影响越明显.DDTs的空间分布具明显点源特征,市县周围均出现明显浓集中心,中南部部分区域浓度明显较高.全区DDTs土壤环境质量污染程度较低,主要以一二类土壤为主,分别占78.95%和21.05%.     

高地下水位地区透水停车场的水文控制效果

为确定高地下水位地区透水铺装对路面径流的水文控制效果,在上海市区建造了4个实验性透水铺装单元与1个不透水铺装对照,其中3个为设有防水衬底的不透型设施分别为透水混凝土铺装(设施Ⅰ)、水泥稳定碎石基层/缝隙透水砖面层(设施Ⅱ)、碎石基层/缝隙透水砖面层(设施Ⅲ),1个普通缝隙透水砖铺装(设施Ⅳ),以及1个不透水混凝土对照(设施0).历时1年监测了实际降雨条件下4种实验设施的表面径流、排水管出流流量及表面渗透速率,考察不同设施的径流总量削减率、峰值削减及峰现延迟能力.结果表明,缝隙透水砖面层的表面稳定渗透速率明显小于透水混凝土面层,使用1年后,2种面层表面稳定渗透速率均明显下降;4种设施的表面产流均无显著差异;3种不透型设施的就地消纳水量能力均较弱,年径流总量控制率分别为24.2%、28.5%、28.4%,排水管不发生出流的控制降雨量分别为5.2 mm、7.8 mm、7.8 mm;设施Ⅰ的峰值削减与峰现延迟效果弱于设施Ⅱ及设施Ⅲ,且3种设施的峰值削减率和峰现延迟时间与降雨强度呈现显著负相关性.     

热活化镁砂的表征、吸附性能及其对含油废水的处理效果研究

通过对镁砂进行改性试图提高其吸附性能,并用于处理含油废水。对镁砂进行热活化处理,并对处理前后的镁砂进行了X射线衍射分析、TG-DSC热分析及扫描电镜分析。再将热活化后的镁砂用于处理模拟含油废水,考察了焙烧温度、吸附剂用量、pH、温度等因素对模拟含油废水中COD去除效果的影响。根据实验结果,确定镁砂的热活化温度为500℃,利用热活化后的镁砂吸附去除模拟含油废水中的COD,处理后出水COD浓度可满足GB 8978—1996《污水综合排放标准》一级标准。