固相萃取-高效液相色谱法测地表水中11种酚类化合物

建立了固相萃取-高效液相色谱法同时测定地表水中11种酚类化合物的方法。水样经过全自动固相萃取仪富集,以HLB柱为萃取柱,乙腈(含1%乙酸)为洗脱剂,用高效液相色谱仪分析定量。该方法在0.5~5.0 mg/L范围内线性良好,相关系数为0.999 6~0.999 9,11种酚类化合物的纯水加标回收率为82.0%~111%,地表水加标回收率为98.5%~116%,精密度为3.58%~4.67%,检出限为1×10-4~5×10-4mg/L,该方法简单实用、准确可靠,可用于地表水中酚类化合物的同时测定。     

铅锌冶炼废水处理后沉渣重金属元素特征与环境活性研究

通过扫描电子显微镜与X射线衍射仪分析、BCR法三步连续提取及元素化学分析,对铅锌冶炼废水处理后沉渣中重金属的赋存状态、环境活性进行研究。结果表明,沉渣中主要毒害元素为Zn、Pb、Mn、Cd和Cu,且以非晶态存在,其含量分别为62350、29530、7650、4530和830 mg/kg。渣中Zn和Cd酸可提取态所占比例较大,分别为37.72%和34.44%; Mn的可还原态相对含量很高,达到49.67%;Zn和Pb的可氧化态含量较高,分别占全量的34.16%、34.68%;Pb和Cu的残渣态含量较高,分别占全量的39.72%和61.69%。     

不同水体沉积物中磷的形态分析

磷是生态系统中必不可少的营养元素,其含量与水体的营养程度密切相关,过剩的磷会导致水体富营养化,使生态平衡遭到破坏.就不同水体沉积物中磷的形态进行了分类综述,归纳总结了不同水体沉积物中磷的形态以及分布特征,并且进一步概述了影响沉积物中磷向水体释放的因素.     

二噁英类物质CALUX报告基因法在造纸行业的应用探究

选择典型造纸厂,采用化学激活报告基因法(CALUX)测定造纸过程中废水和纸浆中的二噁英类物质,并将部分样品测定结果与高分辨气相色谱-高分辨质谱(HRGC-HRMS)法测定结果作线性回归,换算系数为0.21,表明CALUX可用于造纸行业废水中二噁英类物质的快速筛查。将CALUX用于测定造纸厂废水中二噁英类物质,结果表明用含元素氯的漂白工艺会产生大量二噁英类物质,其中漂白废水中的目标物毒性当量浓度最高,经处理后可达到国家排放标准;而用无元素氯的漂白工艺,二噁英类物质的产生量会大幅降低。     

基于ZIF-L的微固相萃取技术测定地表水中痕量典型多环芳烃

制备类沸石咪唑酯骨架ZIF-L材料,将其用作微固相萃取吸附剂,处理水中萘、苊、苊烯、芴、菲、蒽、荧蒽、芘等8种痕量典型多环芳烃,再用HPLC测定。试验表明,ZIF-L对上述多环芳烃的萃取效率明显高于商品化萃取材料C 18和多壁碳纳米管。方法在0.100μg/L^200μg/L范围内线性良好,方法检出限为0.02μg/L^0.03μg/L,标准溶液5次测定结果的RSD为4.7%~9.5%,实际水样加标回收率为84.5%~115%。将该方法用于北太湖5个点位水样的测定,测定值为未检出~3.40μg/L。     

饮用水源微生物快速检测技术的发展及应用

微生物是威胁饮用水安全的首要问题,水环境微生物快速检测技术的开发和应用是推动饮用水源微生物快速检测和水质安全预警技术发展的保障。随着对水质微生物污染快速检测和准确预警新要求的提出,水环境中微生物在线检测和预警技术得到了越来越多的开发和应用。笔者总结了水环境常见微生物检测方法和技术的发展,重点讨论了饮用水源微生物快速检测技术的发展和应用,根据各项技术的应用和推广使用程度,将其归纳为常用快速检测技术、潜在适用快速检测技术和新型快速检测技术等类别,并详细阐述了一些应用较广的技术,以期为构建水质微生物污染早期预警系统提供参考。     

Monitoring the formation of trihalomethanes in the effluents from a shrimp hatchery

Formation of trihalomethanes (THM) was monitored at the Laboratório de Camarões Marinhos (LCM) from the Universidade Federal de Santa Catarina. THM could be present because chlorinated effluents from disinfection are discharged from the different hatchery rooms. THM quantification was done through an analytical methodology using Purge&;Trap coupled with a gas chromatograph equipped with an electron capture detector. Relative standard deviation (RSD), limit of detection (LOD) and limit of quantification (LOQ) for the methodology corresponded to the ranges of 8–17%; 0.01–0.03 μg L^?1 and 0.03–0.08 μg L^?1, respectively. Linear working range was of 0.1–8.0 μg L^?1 for all compounds. Enrichment and recovery method was applied to evaluate possible matrix effects and the results varied from 71.2% to 107.9%. LCM was monitored between August and December, 2004. This study showed that THM did not increase with the increase in postlarvae production and also that the aquatic life and the surrounding environment were not affected.     

Desorption of arsenic from drinking water distribution system solids

Previous work has shown that arsenic can accumulate in drinking water distribution system (DWDS) solids (Lytle et~al., 2004) when arsenic is present in the water. The release of arsenic back into the water through particulate transport and/or chemical release (e.g. desorption, dissolution) could result in elevated arsenic levels at the consumers' tap. The primary objective of this work was to examine the impact of pH and orthophosphate on the chemical release (i.e. desorption) of arsenic from nine DWDS solids collected from utilities located in the Midwest. Arsenic release comparisons were based on the examination of arsenic and other water quality parameters in leach water after contact with the solids over the course of 168~hours. Results showed that arsenic was released from solids and suggested that arsenic release was a result of desorption rather than dissolution. Arsenic release generally increased with increasing initial arsenic concentration in the solid and increasing pH levels (in the test range of 7 to 9). Finally, orthophosphate (3 and 5 mg PO₄/L) increased arsenic release at all pH values examined. Based on the study results, utilities with measurable levels of arsenic present in their water should be aware that some water quality changes can cause arsenic release in the DWDS potentially resulting in elevated levels at the consumer's tap.     

Optical Resilience of the Paraíba do Sul River (Brazil) during a Toxic Spill of a Wood-Pulping Factory: The Cataguazes Accident

This study investigates the inherent optical properties (IOP) of a Brazilian river during a non-natural, anthropogenically mediated, toxic spill of a wood-pulping factory (the ‘Cataguazes accident’). The results indicated an outstanding transformation in the river water chromophoric dissolved organic matter (CDOM) pools. For instance, increases in CDOM absorption coefficients, a _CDOM (λ), which were averaged at specific spectral intervals, , ranged from 58-fold at the UV-B and UV-A ranges to 95-fold at the PAR range. As a result, the water color expressed as CDOM absorption at 440 nm, a _CDOM (440), varied from 4.16 to 365.03 m^-1. For S-coefficient, the variations ranged from ∼1.1 to 5.6-fold, respectively, at the 300–650 nm and UV-B range. The variability of S as a proxy of dissolved chromophores was thus clearly influenced by the spectral range used. Optical proportions were also investigated through the use of and S ratios at the UV-B, UV-A, and PAR ranges and, in the case of , also at the NIR range. This approach also showed clear variations between the water samples, likely reflecting changes in the composition of optically active substances in the river system. As a whole, the findings obtained here indicated that both the quantity and quality of the chromophoric material dissolved in the river water were greatly altered by the toxic spill. The changes in the optical properties of the river water, although extreme and likely with no parallel in the literature, were quite rapid as indicated by the optical resilience of the system. Overall, this study indicates that IOP might be thought, and possibly used, as a metric tool for monitoring the state of waters and aquatic ecosystems.     

The Influence of a Coal-Fired Power Plant in Turkey on the Chemical Composition of Rain Water in a Certain Region

In this study, the chemical composition of the rainwater in Yatağan, which is a region surrounding a coal power plant was investigated from February to April 2002. Rainwater samples were obtained from Yatağan, located northwest of Muğla City in Turkey. pH values and concentrations of major ions (Ca²⁺, Na⁺, K⁺, , , ) in the rainwater samples were analyzed. The pH varied from 5.1 to 7.9 with an average of 6.7 which was in alkaline range considering 5.6 as the neutral pH of cloud water in equilibrium with atmospheric CO₂. In the total of 30 rain events, only three events were observed with water in the acidic range (<5.6), which occurred after continuous rains. The equivalent concentration of components followed the order: Ca²⁺ > > Na⁺ > > > K⁺ > H⁺. The anion and cation concentrations in the rainwater samples showed a high sulphate concentration (131 μEq/l), as well as high sodium (40 μEq/l) and calcium (298 μEq/l) concentrations. These values indicate that one probable source of the high sodium concentration is fly ash, after the coal burning process and the power plant can be effective on level concentrations in rainwater. In addition, the dust-rich local and surrounding limestone environment might have caused the high concentration of Ca²⁺ in rainwater of the Yatağan Basin. Due to a large contribution of these cations to the sulphate neutralization action, the rainwater of this region displays only a moderate acidity, which does not cause significant environmental impact.