光化技术在苎麻脱胶废水处理中的运用

介绍在生化方法的基础上 ,引用光化技术 ,解决苎麻脱胶废水处理这一难题。     

发光细菌对化合物的致突效应与检测研究

从明亮发光杆菌Ｔ３小种分离到的自发暗变种（Ｋ变种）Ｔ９１７１菌种对三种化合物呈致空变阳性反应，对二种化合物呈可疑阳性，发光细菌暗变种对遗传毒性化合物致突效应的灵敏度高于Ａｍｅｓ试验和浦乳动物致癌试验，可望成为一种简易灵敏的测试环境致突变物的短期生物学试验方法。     

色谱痕量分析中的非线性效应及影响

根据溶质在流动相与固定相中吸附平衡热力学的观点简要讨论了色谱分离中的非线性原理，及其在进行色谱痕量分析采用大进样量时对定性和定量的影响，并提出了改进方法。同时也探讨了非线性效应对样品前处理及未知物馏份制备分离的影响与应用。     

Effect of catalyzed diesel particulate filter and its catalyst loading on emission characteristics of a non-road diesel engine

In this study, the effects of a diesel oxidation catalyst (DOC) coupled with a catalyzed diesel particulate filter (CDPF) with different catalyst loadings on the power, fuel consumption, gaseous and particulate emissions from a non-road diesel engine were investigated. Results showed that the after-treatment had a negligible effect on the power and fuel consumption. The reduction effect of the DOC on the CO and hydrocarbon (HC) increased with the engine load. Further reductions occurred coupling with the CDPF. Increasing the catalyst loading resulted in a more significant reduction in the HC emissions than CO emissions. The DOC could increase the NO₂ proportion to 37.9%, and more NO₂ was produced when coupled with the CDPF below 250°C; above 250°C, more NO₂ was consumed. The after-treatment could reduce more than 99% of the particle number (PN) and 98% of the particle mass (PM). Further reductions in the PN and PM occurred with a higher CDPF catalyst loading. The DOC had a better reduction effect on the nucleation particles than the accumulation ones, but the trend reversed with the CDPF. The DOC shifted the particle size distribution (PSD) to larger particles with an accumulation particle proportion increasing from 13% to 20%, and the geometric mean diameter (GMD) increased from 18.2 to 26.0 nm. The trend reversed with the CDPF and the accumulation particle proportion declined to less than 10%. A lower catalyst loading on the CDPF led to a higher proportion of nucleation particles and a smaller GMD.     

腈纶污水的分质处理

介绍某公司腈纶污水的水质特点，处理工艺、主要设备及构筑物设计参数。该污水预处理装置运行以来，处理效果良好，符合后续生化处理的进水要求。     

裂变径迹定年方法的研究现状及存在的问题

简要介绍了裂变径迹定年的分析方法 ,实验技术 (包括单矿物分选、制片、抛磨、蚀刻及径迹测量技术 )的研究现状、存在的问题及发展趋势     

GIS支持下的水文生态效应评价混合型专家系统设计初探

文章从人工神经网络(ANN)、专家系统(ES)各自的优势和不足出发，结合地理信息系统(GIS)技术的特点，介绍了水文生态效应评价的混合型专家系统(HEMES)的基本结构模式和各模块的功能。然后抓住ANN、ES、GIS的共同作用因子一专家知识，从数据库结构、C 类方面探讨了三者集成的问题，并根据集成的思想探讨了相关功能设计。指出HEMES是一种更准确、易操作的评价技术，可作为相关管理、决策者的辅助工具。     

Carbon isotope ratios in logged and unlogged boreal forests: Examination of the potential for determining wildlife habitat use

Due to assimilation of recycled CO₂ from litter decomposition and photosynthetic changes in carbon fractionation at low light levels, the foliage at the base of a forest is often more depleted in¹³C compared to that exposed to the atmosphere in either the canopy or in open clearings. This is referred to as the canopy effect. African research has indicated that these habitat differences in foliar ¹³C can be substantial enough to affect the carbon isotope ratios of resident fauna. Previous work documenting a 30-year chronology on moose teeth from Isle Royale National Park indicated a progressive depletion in¹³C and suggested that this could be due to forest regrowth following extensive burning. The present study examined the assumption implicit in this hypothesis that foliar ¹³C varies between open and closed boreal forest sites. I found a marginal canopy effect of 2 ¹³C difference between upper canopy and ground flora for a forest in northwestern Ontario and an average difference of 1.2 in under- and mid-story vegetation between closed forests and open clear-cuts. Because of these small differences, the utility of carbon isotope analysis in quantifying temporally integrated exploitation of deforested habitats will be low for northern boreal locations. In denser forests, such as those in the tropics or western North American where the canopy effect can be expected to be much greater, ¹³C analysis may still offer some promise for determining selection by wildlife of disturbed habitats.     

无机高分子絮凝剂聚硅铝铁硼的制备及其絮凝性能研究

以工业水玻璃、氯化铝、氯化铁、硼酸为原料，制备了一种性能优良的无机高分子絮凝剂聚硅铝铁硼(PSBFA)。通过考察不同pH值条件下水玻璃的胶凝时间、Si／Al物质的量比、硼的浓度、熟化时间等因素对聚硅铝铁硼产品应用性能的影响，确定了聚硅铝铁硼的最佳制备条件为pH值为2～4，Si／Al物质的量比在1．0左右，硼的浓度为0．02mol／L，熟化时间为5d左右。絮凝应用实验表明，聚硅铝铁硼对于印染废水脱色效果、生活污水的COD去除率具有优异的絮凝性能；与传统混凝剂硫酸铝和市售混凝剂聚合氯化铝(PAC)相比，PSBFA的具有投加量少、沉降速度快、絮体体积小等优点。     

Oil/Suspended Particulate Material Interactions and Sedimentation

The interactions of physically dispersed oil droplets with suspended particulate material (SPM) can be important for the transport of bulk quantities of spilled crude oil and polycyclic aromatic hydrocarbons (PAH) to subtidal sediments. The literature regarding oil/SPM interactions is reviewed, and results from whole-oil droplet/SPM interaction kinetics and pure-component (Prudhoe Bay crude oil distillate cut) equilibrium partitioning experiments are presented. The effects of oil type, SPM characteristics, and salinity on the interaction rates are examined, and the importance of whole-oil droplet/SPM interactions on particle agglomeration and settling behavior are discussed. Whole-oil droplet/SPM interactions are retarded as oil droplet dispersion into the water column is inhibited by oil viscosity increases due to evaporation weathering and water-in-oil emulsification. Compared to whole oil droplet/SPM interactions, dissolved-component/SPM adsorption is not as significant for transport of individual components to sediments. The information presented in this paper can be used to augment computer-based models designed to predict oil-spill trajectories, oil-weathering behavior, and spilled oil impacts to the marine environment.