改性13X沸石蜂窝转轮对甲苯的吸附性能研究

系统地考察了改性13X沸石分子筛(M-13X)蜂窝转轮对甲苯废气的吸附性能,探讨了运行参数和进气参数对转轮吸附的影响规律.结果表明,M-13X分子筛具有良好的抗湿性,转速、再生风温度过高或过低均会降低系统去除率,合适的浓缩比应兼顾效率与能耗.对于进气浓度100 mg·m-3,进气流速2 m·s-1的甲苯废气,推荐运行参数为再生风温度180℃,转速2.8~5 r·h-1,浓缩比8~12,在该运行参数下去除效率均维持在90%以上.该研究为M-13X蜂窝转轮工业应用提供设计经验及运行参数,对于高浓度废气,应控制较低的进气流速,同时加快转速、提高脱附热量以满足去除效果.     

Optimization of Headspace Solid Phase Microextraction Procedure for Trace Analysis of Toluene

This study describes optimization of headspace solid phase microextraction followed by gas chromatography equipped with a flame ionization detector for toluene at trace level in spiked urine. The parameters affecting the extraction and gas chromatographic determination of analytes were studied: extraction time and temperature; desorption time and temperature; addition of NaCl; and pH, volume and agitation of the sample. Optimized headspace extraction was carried out at 30 °C for 6 min in the presence of 0.2 g-m^-1of NaCl in the sample solution. Also, sample volume and sample pH were optimized at 5 ml and 7 (neutral pH), respectively. Desorption of the analytes was carried out at 250 °C for 60 s. The optimized procedure was validated with 3 different pools of spiked urine; it showed good reproducibility over 6 consecutive days and 6 within-day experiments. The study also determined the accuracy, linearity and detection limits of this method.     

Size distribution and chemical composition of secondary organic aerosol formed from Cl-initiated oxidation of toluene

Secondary organic aerosol (SOA) formed from Cl-initiated oxidation of toluene was investigated in a home-made smog chamber. The size distribution and chemical composition of SOA particles were measured using aerodynamic particle sizer spectrometer and the aerosol laser time-of-flight mass spectrometer (ALTOFMS), respectively. According to a large number of single aerosol diameter and mass spectra, the size distribution and chemical composition of SOA were obtained statistically. Experimental results showed that SOA particles created by Cl-initiated oxidation of toluene is predominantly in the form of fine particles, which have diameters less than 2.5 m (i.e., PM2.5), and glyoxal, benzaldehyde, benzyl alcohol, benzoquinone, benzoic acid, benzyl hydroperoxide and benzyl methyl nitrate are the major products components in the SOA. The possible reaction mechanisms leading to these products are also proposed.     

CuxCe1-xO2/γ-Al2O3催化剂催化燃烧甲苯性能的研究

以γ-Al₂O₃ 为载体,以复合氧化物Cu_xCe_1-xO₂为活性组分,其中,x=0.1,0.2,0.4,0.6,0.8,通过浸渍法制备了一系列Cu_xCe_1-xO₂/γ-Al₂O₃催化剂.在固定床反应器中评价了催化剂对甲苯的催化活性,通过XRD、SEM对催化剂进行表征,并运用ICP-MS分析并计算Cu、Ce的摩尔比以及活性组分的负载量.结果表明,在Cu_xCe_1-xO₂/γ-Al₂O₃催化剂中Cu、Ce摩尔比的实际值与理论值相近,活性组分的负载量在19%以上,而且对甲苯都有较好的低温催化活性,其中当x=0.2时,即Cu_0.2Ce_0.8O₂/γ-Al₂O₃催化剂对甲苯的催化活性最高,其中T₁₀=160 ℃,T₉₀=265 ℃;当甲苯的进口浓度在700~3000 mg·m^-3时,进口浓度对Cu_0.2Ce_0.8O₂/γ-Al₂O₃催化剂的催化活性影响较小,且经过连续80 h的稳定性操作后转化率仍然保持在90%以上.     

直流电晕放电降解甲苯的特性研究

利用直流高压电晕产生的非平衡等离子体分解甲苯。考察了各种因素对甲苯降解效率的影响，并对降解机理进行分析。研究结果表明：放电时间的延长、放电电压的提高、适宜的相对湿度和较低甲苯的初始浓度都有利于提高甲苯的降解效率。     

微波辐照载甲苯活性炭再生研究

研究在微波辐照条件下,活性炭量、微波功率、载气量、加热时间等因素对载甲苯活性炭脱附的影响,在正交实验中,各个影响因素的重要性排序为:氮气流量、活性炭量、辐照时间、微波功率,最佳的操作工况为:活性炭量9 g、载气流量300 mL/min、辐照时间120 s、微波功率500W,活性炭的脱附率在99.74%.     

气-固流化床光催化氧化甲苯的研究

在自制的流化床光催化反应装置中研究了中低浓度（28～140 mg/m^3）甲苯的气相光催化降解过程,考察了光照时间、初始浓度、表观气速和催化剂负载量等因素对甲苯光催化降解率的影响规律.结果表明,紫外灯照射约1.5 h,甲苯的转化率达最大值,甲苯初始浓度越低,维持此最大值的时间越久;在一定低浓度范围内（28～55 mg/m^3）,甲苯的转化率不随浓度变化,符合一级反应动力学,浓度进一步增加,则甲苯的转化率下降;表观气速和催化剂负载量的最佳值分别为3.3Umf和0.19 g TiO2/g SiO2.     

氨对甲苯二次有机气溶胶形成和化学组分的影响研究

氨(NH_3)是大气中常见的主要碱性污染气体,能够影响二次有机气溶胶(SOA)的形成和化学组分.本文利用自制的烟雾腔系统开展了NH_3对甲苯SOA形成和化学组分的影响研究,先后采用扫描移动粒径谱仪(SMPS)、气溶胶激光飞行时间质谱仪(ALTOFMS)、紫外-可见分光光度计(UV-Vis)、衰减全反射傅里叶变换红外光谱仪(ATR-FTIR)和荧光光谱仪(MF)测量反应产生的SOA粒子的物理化学性质.结果显示,在光照60 min的时间范围内,有NH_3条件下形成的SOA质量浓度和中心粒径相比于无NH_3条件下分别增加了50%和25%,这说明NH_3能够显著促进甲苯SOA的形成.与无NH_3条件下相比,NH_3存在时甲苯SOA化学组分的紫外可见吸收光谱在270 nm处有明显的吸收峰;红外吸收光谱出现了CN、C—N、N—H键的吸收峰;激光解吸附质谱图中含有m/z=67(C_3H_3N_2~+)、m/z=41(C_2H_2N~+)和m/z=28(CH2N+)碎片峰.这些谱图信息综合表明是NH_3和甲苯SOA中的二醛组分反应形成了咪唑类新产物.这为研究人为源SOA的形成机制提供了实验依据.     

Investigation of Mtbe and Aromatic Compound Concentrations at a Gas Service Station

Methyl tert-butyl ether (MTBE) has been used as a fuel additive at levels of 2–11% in Taiwan for the past decade. The purpose of this additive is to enhance the octane, replace the use of lead-based anti-knock gasoline additives and reduce aromatic hydrocarbons. However, it is possible that oxygenated fuel has a potential health impact. To determine the air quality impact of MTBE, measurements were made of ambient MTBE and other gasoline constituents at a service station. Additionally, environmental conditions (wind speed, wind direction, and temperature, etc.) that could affect concentrations of emission constituents were measured. Gas samples were analyzed for target MTBE and volatile organic compounds, e.g., benzene and toluene. Ambient samples were collected using Tenax adsorbent tubes for mass spectrometric analysis at a service station located in Changhua County, Taiwan. The resulting measured ambient air concentrations were compared with Taiwans regulatory standards for hazardous air pollutants. Subsequently, the factors controlling the formation of high-VOC levels at the service station and in the residential neighborhoods were identified. Additionally, the results can provide the Environmental Protection Agency (EPA) of Taiwan with useful information and prompt them to mandate this gas service station to install a refueling vapor recovery system.     

甲苯法生产己内酰胺废水治理技术探讨

简要介绍了甲苯法生产己内酰胺工艺的“废水”来源和废水处理工艺。