半刚性路面基层环境影响评价研究

采用输人输出模型,通过清单分析和归一化处理对我国典型的路面基层材料水泥稳定粒料与石灰稳定粒料以及几种工业固体废弃物路面基层材料的环境影响进行了研究并和水泥混凝土进行了对比.结果表明,工业固体废弃物路面基层对资源能源消耗量少,生产过程中固体废弃物、温室气体、酸雨气体的排放量小.和我国目前广泛使用的水泥稳定粒料相比,其环境影响较小,而且可以被再循环用作水泥生产的混合材,是一类典型的生态建筑材料.     

六箱一体化工艺处理城市污水周期设置的试验

介绍了智能型六箱一体化活性污泥脱氮除磷工艺的运行方式及原理,并研究了周期设置对污染物去除的影响。中试研究表明,在泥龄13d和水力停留时间13h的条件下．当周期时间为16h时．工艺取得良好的脱氮除磷效果．出水水质可达国家一级A排放标准。     

电子废物管理体系研究

分析了欧盟、日本、美国等国家的电子废物管理体系主要特点,并介绍我国电子废物管理现状和主要措施,在此基础上归纳总结了当前电子废物管理存在的主要问题并提出相关建议。     

厚软场地上大跨径桥梁设计反应谱研究

大跨径桥梁塔高、跨径大、自振周期长,深厚、软弱场地的长周期地震动对桥体结构影响较大。我国《公路工程抗震设计规范(JT J004-89)》也只适用主跨不超过150 m的梁桥和拱桥,国内长期以来没有一个适用于大跨径桥梁的抗震设计规范或指南。本文结合大跨径桥梁工程实例,根据场地土层静、动力性能参数的原位测试和动三轴试验结果,进行厚软场地土层地震反应分析,研究厚软场地的地震动效应,讨论了不同地震动强度时厚软场地的设计反应谱特征,分析了现行规范设计反应谱应用的局限性,成果对相关工程有重要指导意义,对大跨径桥梁抗震设计规范的制定也有借鉴作用。     

聚合氯化铝铁在纺织印染废水处理中的应用

主要探讨聚合氯化铝铁（PAFC）在纺织印染废水处理的应用,并对影响絮凝效果的主要因素,如投加量、pH值等进行研究,找出最佳反应条件.     

2002~2009年兰州PM10人体健康经济损失评估

参考近年来公开发表的国内外流行病学文献,筛选出PM10的健康效应终点和适合于兰州地区的暴露-反应关系系数,对2002~2009年兰州地区PM10人体健康经济损失进行了计算.结果表明2002年以来兰州地区PM10人体健康经济损失并未明显升高,而是逐年波动;年损失值均在10亿元以上,其中2009年最高为16.6亿元; PM10人体健康经济损失与GDP的比值呈明显下降的趋势.     

居民电子废物回收行为影响因素的实证研究

基于对350名城市居民的问卷调查结果,运用验证性因子分析方法对居民的电子废物回收行为、行为意向及其影响因素进行了实证研究.结果表明,基于计划行为理论所建立的结构方程模型可以较为有效地诠释有关研究假设,环境知识、舆论宣传和垃圾分类等情境因素对电子废物回收行为具有调节作用.知觉行为控制对于行为意向转化为行为具有非常重要地促进作用,而便利状况则是影响知觉行为控制的重要因素.     

Thermal cracking of waste printed wiring boards for mechanical recycling by using residual steam preprocessing

Mechanical waste-processing methods, which combine crushing and separation processes for the recovery of valuable materials, have been widely applied in waste printed wiring board (PWB) treatment. However, both the high impact toughness and the tensile and flexural strengths of whole PWB with a laminated structure result in great energy consumption and severe abrasion of the cutters during multi-level crushing. In addition, the high temperatures occurring in continual crushing probably cause the decomposition of the polymer matrix. A thermal-crack method using residual steam as the heating medium has been developed to pre-treat waste PWBs. This treatment reduces the mechanical strength in order to improve the recovery rate of valuable materials in subsequent mechanical recycling. The changes of the PWBs’ macro-mechanical properties were studied to evaluate thermal expansion impacts associated with changes in temperature, and the dynamic dislocation micro-structures were observed to identify the fracture mechanism. The results showed that thermal cracking with steam at the temperature of 500 K can effectively attenuate the mechanical properties of waste PWBs, by reducing the impact, tensile and flexural strengths respectively, by 59.2%, 49.3% and 51.4%, compared to untreated PWB. Thermal expansion can also facilitate the separation of copper from glass fiber by reducing peel resistance by 95.4% at 500 K. It was revealed that the flexural fracture was a transverse cracking caused by concentrated stress when the heating temperature was less than 500 K, and shifted to a vertical cracking after exceeding 500 K.     

Co-fermentation of waste activated sludge with food waste for short-chain fatty acids production: effect of pH at ambient temperature

Effect of pH ranging from 4.0 to 11.0 on co-fermentation of waste activated sludge (WAS) with food waste for short-chain fatty acids (SCFAs) production at ambient temperature was investigated in this study. Experimental results showed that the addition of food waste significantly improved the performance of WAS fermentation system, which resulted in the increases of SCFAs production and substrate reduction. The SCFAs production at pH 6.0, 7.0, 8.0, and 9.0 and fermentation time of 4 d was respectively 5022.7, 6540.5, 8236.6, and 7911.7 mg COD·L^-1, whereas in the blank tests (no pH adjustment, pH 8.0 (blank test 1), no food waste addition, pH 8.0 (blank test 2), and no WAS addition (blank test 3)) it was only 1006.9, 971.1, and 1468.5 mg COD·L^-1, respectively. The composition of SCFAs at pH from 6.0 to 9.0 was also different from other conditions and propionic acid was the most prevalent SCFA, which was followed by acetic and n-butyric acids, while acetic acid was the top product under other conditions. At pH 8.0 a higher volatile suspended solids (VSS) reduction of 16.6% for the mixture of WAS and food waste than the sole WAS indicated a synergistic effect existing in fermentation system with WAS and food waste. The influence of pH on the variations of nutrient content was also studied during anaerobic fermentation of the mixture of WAS and food waste at different pH conditions. The release of NH4+-N increased with fermentation time at all pH values investigated except 4.0, 5.0 and in blank test one. The concentrations of soluble phosphorus at acidic pHs and in the blank test one were higher than those obtained at alkaline pHs. Ammonia and phosphorus need to be removed before the SCFAs-enriched fermentation liquid from WAS and food waste was used as the carbon source.     

Hazardous waste management in educational and research centers: a case study

The hazardous waste management (HWM) practice at Tehran University of Medical Sciences Central Campus, Iran, was investigated in this study. Four schools were selected and the required information such as type and amount of wastes, temporary storage methods, waste discharge frequency, and final waste disposal methods using sampling, questionnaires, interviews with laboratory staff, and reference to available documents were gathered. The quantity of hazardous waste generation per year excluding the uncontrolled wastewater was found to be 2.072 tons per year. The obtained results show that wastes having features of being infectious, toxic, ignitable, carcinogenic, corrosive, and reactive were present at 32%, 28%, 16%, 14%, 8%, and 2%, respectively. In the central campus, hazardous solid wastes managed with household solid wastes and hazardous liquid waste were discharged into the sinks without any kind of control; improper HWM practices are evident from the point of waste production to final disposal.