电热管焊接接头挤压裂纹的分析

针对电热管焊接接头挤压产生的裂纹 ,通过采用金相显微镜观察其金相组织并用直读光谱对原材料成分进行化学成分分析 ,排除了成分、焊接工艺规范等的影响。经过对挤压过程分析 ,发现应力集中点是产生裂纹的主要原因 ,并提出了改进的方法     

Synthesis of branched,nano channeled,ultrafine and nano carbon tubes from PET wastes using the arc discharge method

Upcycling polymer wastes into useful, and valuable carbon based materials, is a challenging process. We report a novel catalyst-free and solvent-free technique for the formation of nano channeled ultrafine carbon tubes (NCUFCTs) and multiwalled carbon nanotubes (MWCNTs) from polyethylene terephthalate (PET) wastes, using rotating cathode arc discharge technique. The soot obtain from the anode contains ultrafine and nano-sized solid carbon spheres (SCS) with a mean diameter of 221 nm and 100 nm, respectively, formed at the lower temperature region of the anode where the temperature is approximately 1700 °C. The carbon spheres are converted into long “Y” type branched and non-branched NCUFCTs and MWCNTs at higher temperature regions where the temperature is approximately 2600 °C, with mean diameters of 364 nm and 95 nm, respectively. Soot deposited on the cathode is composed of MWCNTs with a mean diameter of 20 nm and other nanoparticles. The tubular structures present in the anode are longer, bent and often coiled with lesser graphitization compared to the nanotubes in the soot on the cathode.     

气相色谱法测定空气和废气中8种烃类化合物

建立了针筒采样、大口径毛细管柱分离、气相色谱-氢火焰离子化检测器测定空气和废气中甲烷、乙烷、乙烯、乙炔、丙烷、异丁烷、正丁烷和正戊烷等8种烃类化合物的方法.优化了试验条件,方法线性良好,甲烷、乙烯、乙炔、乙烷、丙烷、异丁烷、正丁烷和正戊烷的检出限分别为0.09 mg/m3、0.20 mg/m3、0.18 mg/m3、0.29 mg/m3、0.28 mg/m3、0.37 mg/m3、0.16 mg/m3和0.56 mg/m3,RSD＜8.0%,加标回收率为80.5%～104%.     

Quantifying local traffic contributions to NO2 and NH3 concentrations in natural habitats

NO₂ and NH₃ concentrations were measured across a Special Area for Conservation in southern England, at varying distances from the local road network. Exceedances of the critical levels for these pollutants were recorded at nearly all roadside locations, extending up to 20 m away from roads at some sites. Further, paired measurements of NH₃ and NO₂ concentrations revealed differences between ground and tree canopy levels. At “background” sites, away from the direct influence of roads, concentrations were higher within tree canopies than at ground level; the reverse pattern was, however, seen at roadside locations. Calculations of pollutant deposition rates showed that nitrogen inputs are dominated by NH₃ at roadside sites. This study demonstrates that local traffic emissions contribute substantially to the exceedance of critical levels and critical loads, and suggests that on-site monitoring is needed for sites of nature conservation value which are in close proximity to local transport routes.     

基于卫星夜间灯光数据的中国分省碳排放时空模拟

中国能源统计数据"横向不可比,纵向不可加"现象依然突出,尤其是分省能源消费统计千差万别,给分省碳排放评估带来了较大困难,如何利用卫星遥感数据科学合理地估算中国分省碳排放是当前亟须研究的问题。本文运用DMSP/OLS全球稳定夜间灯光数据,在通过相互校正、年内融合和年际间校正等系列处理得到中国分省稳定夜间灯光数据的基础上,首先分别构建中国分省稳定夜间灯光亮度DN值与人均碳排放和单位面积碳排放之间的时空地理加权回归模型,两个模型整体效果均较好,拟合优度分别高达96.74%和99.24%;其次运用稳定夜间灯光亮度DN值对分省人均碳排放和单位面积碳排放进行时空模拟;最后运用人口规模和土地面积对分省碳排放进行估算。估算结果显示:(1)整体来看,2000—2013年年均碳排放模拟值与实际值6.3349×109t较为接近,两个模型的相对误差均在0.5%以内。(2)分年度来看,所有年份的相对误差均在5%以内,2006年分省加总碳排放模拟值与实际碳排放6.2036×109t最为接近,绝对误差和相对误差均较小,两个模型模拟值的相对误差均为0.04%。(3)分省域来看,2000—2013年年均碳排放模拟值与实际碳排放均非常接近,除海南和宁夏外,其余28个省区市的相对误差均在1%以内。(4)分年度分省域来看,以2013年为例,40%省份的相对误差在2%以内,70%省份的相对误差在5%以内。从整体、分年度、分省域、分年度分省域的估算结果来看,基于稳定夜间灯光数据的中国分省碳排放时空模拟效果良好。因此,运用卫星夜间灯光数据可以较为准确地对中国分省碳排放进行估算和预测,为卫星遥感影像数据服务分省碳排放监测和评估提供一种补充性参考。     

Effects of Road Networks on Bird Populations

Abstract: One potential contributor to the worldwide decline of bird populations is the increasing prevalence of roads, which have several negative effects on birds and other vertebrates. We synthesized the results of studies and reviews that explore the effects of roads on birds with an emphasis on paved roads. The well‐known direct effects of roads on birds include habitat loss and fragmentation, vehicle‐caused mortality, pollution, and poisoning. Nevertheless, indirect effects may exert a greater influence on bird populations. These effects include noise, artificial light, barriers to movement, and edges associated with roads. Moreover, indirect and direct effects may act synergistically to cause decreases in population density and species richness. Of the many effects of roads, it appears that road mortality and traffic noise may have the most substantial effects on birds relative to other effects and taxonomic groups. Potential measures for mitigating the detrimental effects of roads include noise‐reduction strategies and changes to roadway lighting and vegetation and traffic flow. Road networks and traffic volumes are projected to increase in many countries around the world. Increasing habitat loss and fragmentation and predicted species distribution shifts due to climate change are likely to compound the overall effects of roads on birds.     

建筑应急照明的设计与施工探讨

应急照明是现代建筑安全保障的重要设施之一,它同人身安全和建筑物安全紧密相关。根据建筑电气设计规范对应急照明的具体规定,对应急照明的设计要求做了进一步探讨和归纳总结,并结合具体问题对应急照明设置场所、供电时间、电源供电方式、控制方式、施工设计及设计要点等方面进行了阐述,对应急照明的设计和实践应用中出现的问题进行了分析,并提出了整改措施。     

微孔扩散管曝气试验

本文综术字在污水处理站使用离心鼓风机穿孔管大气泡浅 支暴气所引起的溶解氧不足。     

多源数据支持下城市火灾风险评估及规划响应

为探析城市火灾风险的空间格局特征,提出科学的火灾防控体系,以合肥市为研究对象,基于火灾风险兴趣点(POI)数据、NPP/VIIRS夜间灯光影像数据、消防站与道路信息等多源数据,运用SAVEE模型和迭代方程评估城市火灾风险,并引入区位-配置(L-A)模型,从不同目标情境优化消防站点布局。研究表明:火灾高风险区主要集中于合肥市二环以内的建成区,尤其是老城区、合肥西站片区、政务区、科学城和东部新中心等区域;现有48座消防站对研究区内的POI覆盖效果较好,覆盖率为86.76%,而对NPP/VIIRS覆盖效果一般,覆盖率仅为55.94%,覆盖率在合肥市东北部、西北部和南部部分地区仍有不足;基于最大化覆盖模型,规划新增44座消防站,明显提升5 min响应时间的覆盖率,可进一步夯实城市消防安全。     

带肋薄壁钢管混凝土T形柱温度场试验与数值分析

为研究高温下带肋薄壁钢管混凝土T形截面柱温度场的分布规律,采用电热炉进行了温度场试验,进而采用ABAQUS有限元软件建立模型,与试验结果比较,验证模型的可靠性,在此基础上,分析了标准火灾下构件温度分布规律,构件从受火面到构件截面中部,温度逐渐降低,混凝土温度较钢管和钢筋温度明显滞后,且四个阳角温度高于两个阴角温度。在工程常用范围内,分析了受火时间、截面尺寸和加劲肋间距对构件温度场分布的影响,结果表明:随着构件截面尺寸的增大截面温度呈明显降低趋势,随着受火时间的增加钢管温度和混凝土温度呈不同态势增长,而钢筋加劲肋间距变化对温度场影响较小。