低强度超声波强化污水生物处理机制

研究发现低强度的超声辐照可以有效促进微生物的活性,可将其用于强化污水的生物处理,通过增强反应器内微生物的活性来提高污水的处理效率.本文综述了超声波在生物工程和生物学上的国内外研究成果,对低强度超声波的生物效应以及在促进生物活性中的主要作用机制进行了探讨,并分析了其在强化污水生物处理中的应用前景.     

武汉汉阳地区城市集水区尺度降雨径流污染过程与排放特征

2005年4月至8月对武汉市汉阳地区十里铺集水区进行了8次径流污染过程的水量、水质研究.结果表明,城市集水区尺度径流污染过程是降雨径流对整个集水区地表、排水系统中累积污染物的冲刷、携带过程,受集水区累积污染物数量、污染物可冲刷性和降雨径流特征的共同影响.城市降雨径流中初期污染物浓度显著高于后期,污染物浓度的峰值提前于径流的峰值,具有明显的初期冲刷效应.8次监测结果的算术平均值,初期5 mm、10 mm和15 mm降雨径流中TSS的负荷分别占总负荷的48%、68%和78%.初期径流中TSS的负荷与晴天累积天数呈线性正相关关系.     

基于GIS的北京市妫水河流域水土流失的初步分析

基于ArcGIS空间分析平台和ERDAS空间建模平台,利用水土流失综合指数法,分别以坡度、植被覆盖度和土地利用类型为主要背景因子,分析了北京市妫水河流域水土流失的空间背景特征.结果表明,妫水河流域水土流失的空间背景特征是缓坡、低植被覆盖度和疏林灌草地,而这些特征正是妫水河流域山前洪冲积扇地区的主要特点,缓坡、低植被覆盖度(不考虑城市建成区)和疏林灌草地也主要集中在流域内山前洪冲积扇地区.并提出防治妫水河流域水土流失的有效措施.      

哈尔滨松北区城市湿地土壤抗侵蚀效益价值估算

城市湿地是城市生态系统的重要组成部分,在土壤抗侵蚀方面起重要作用.以哈尔滨松北区城市湿地为研究对象,在哈尔滨松北区湿地的西区、中区及东区沿线共布设采样点3个.哈尔滨松北区城市湿地土壤抗侵蚀效益价值通过湿地减少土地废弃、河道淤积和土壤中肥力流失三方面的价值来估算.结果表明:哈尔滨市松北区城市湿地保护土壤、减少土壤侵蚀的总效益价值为1.900×107元/a;湿地土壤在抗侵蚀效益中的贡献率占总效益的1/5,其效益价值为3.800×106元/a.      

城市环境地球化学调查研究方法综述

总结了城市环境地球化学调查的技术路线,论述了城市环境地球化学解释的思路和方法,提出了城市环境地球化学调查研究的重点问题及研究方向,为开展城市环境调查和评价工作提供了有参考价值的研究线索。     

壳体缓释技术对带壳装药慢速烤燃反应烈度的缓解作用研究

为了研究2种典型壳体缓释技术对弹药慢速烤燃响应烈度的缓解作用,基于试验条件分别建立无缓释设计、侧壁加工应力槽和端盖加工泄压孔的带壳PBX装药慢速烤燃仿真模型,提出使用热分解反应动力学模型和燃烧反应模型模拟计算不同约束条件下带壳PBX装药从开始加热发生热分解反应到点火燃烧以及炸药与壳体耦合作用的烤燃过程的计算方法。研究结果表明：通过侧壁加工应力槽以及端盖加工泄压孔的缓释结构设计,可以有效地降低壳体破裂时炸药内部的压力及反应度,以达到缓解反应烈度的目的。     

Mainstreaming risk reduction in urban planning and housing: a challenge for international aid organisations

The effects of 'natural' disasters in cities can be worse than in other environments, with poor and marginalised urban communities in the developing world being most at risk. To avoid post-disaster destruction and the forced eviction of these communities, proactive and preventive urban planning, including housing, is required. This paper examines current perceptions and practices within international aid organisations regarding the existing and potential roles of urban planning as a tool for reducing disaster risk. It reveals that urban planning confronts many of the generic challenges to mainstreaming risk reduction in development planning. However, it faces additional barriers. The main reasons for the identified lack of integration of urban planning and risk reduction are, first, the marginal position of both fields within international aid organisations, and second, an incompatibility between the respective professional disciplines. To achieve better integration, a conceptual shift from conventional to non-traditional urban planning is proposed. This paper suggests related operative measures and initiatives to achieve this change.     

基于CA的城市形态扩展多解模拟——以北京市东部平原区情景分析为例

构建了一个基于人工神经网络的约束型城市扩展CA模型。利用该模型,预测了北京市东部平原区在3种情景规划之下的未来50年的城市形态,为不同的城市发展模式之间的比较分析奠定基础。然后以2024年的北京东部平原区模拟城市形态为基准,从自然生态功效、社会服务功效、经济利益功效3个方面对3种规划模式进行了情景分析,从而系统的比较了3种规划模式的复合生态功效,为城市规划决策提供有力的支持。     

大型碳化硅生产园区面源源强及减排指标核算

以某年产25万吨大型碳化硅园区无组织排放面源为例,提出基于多个地面站气象数据的CALPUFF模型地面浓度反推方法,优化流场模拟,使得无组织面源源强核算结果更加准确,并以环境保护目标空气质量达标为原则,核算其大气污染物减排指标,得出具体结论:园区大气污染物SO2、NOX、CO、PM10年排放量分别为449.06t、86.98t、5158.58t、115.06t;无组织排放SO2、CO及PM10的减排比例分别为63.5%、19.2%、42.44%,对应减排量分别为285.16 t/a、990.45 t/a、48.83 t/a。     

Explosion suppression of porous materials in a pipe-connected spherical vessel

To study the suppression of different porous materials on the explosion of combustible gas, some experiments were implemented. The porous materials were categorized into three kinds, including six subcategories, and the explosion suppression characteristics of the thin iron hoop, one-layer porous materials, two-layer composite porous materials, and three-layer composite porous materials were studied and analyzed. The results show that a rarefaction wave appears in the spherical vessel during the rapid development stage of combustion explosion. Further, the thin iron hoop could enhance the gas explosion intensity. And the explosion intensity suppression effect of the porous materials is obvious, the best effects of one-layer, two-layer and three-layer porous materials are from Fe–Ni 10 mm/40 PPI, Fe–Ni 10 mm/90 PPI + Al₂O₃ 10 mm/30 PPI, and Al₂O₃ 10 mm/50 PPI + Fe–Ni 10 mm/40 PPI + SiC 20 mm/20 PPI, respectively. According to the surface morphology of the porous materials, the anti-sintering ability of the three categories of porous materials follows the order of Al₂O₃ > SiC > Fe–Ni. Besides, the thickness and pore size of the combined porous material was changed, which has a great influence on the explosion pressure and the explosion intensity.