On causes of illegal waste dumping in Slovakia

This paper examines the determinants of illegal waste dumping at the county level in Slovakia (in 77 of 79 counties), using a truncated regression model. It analyzes a unique data-set composed of illegal dumping data provided by the TrashOut platform and sociodemographic data from the national statistical authority.

This study shows that a higher level of expected overall waste production results in a higher rate of illegally dumped waste and a higher number of illegal dumping sites. More precisely, income has a positive impact on the rate of illegal waste dumping, poverty influences the rate of illegal dumping negatively and a higher level of education does not result in more responsible waste management. On the contrary, higher education has a positive influence on the rate of dumping. A negative relationship between costs of illegal waste disposal and dumping rate, as well as a positive relationship between costs of legal waste disposal and dumping rate has been revealed.     

Comparison of preservation values between Internet and interview survey modes: the case of Dokdo,South Korea

With the increase in employment of Internet surveys, there is a need to address how this survey mode affects inferences. Internet and interview modes are compared in estimating the preservation value of Dokdo, South Korea. Estimates of willingness to pay in the Internet survey are smaller than those in the interview survey. This may be attributable to the interview respondents being conscious of the presence of the interviewers, given the social importance of Dokdo to Koreans. Internet surveys may be effective in reducing overestimation of the willingness to pay in situations where potential social desirability is present.     

Income and distance-decay effects on willingness to pay estimated by the contingent valuation method

This study suggests a methodology for enhancing accuracy in evaluating amenity by the contingent valuation method when household's willingness to pay (WTP) is dependent to its income and the distance between a respondent's residence and the location of a target facility. Using a linear city model, this study demonstrates the influences of income and distance-decay effects on WTP. Simulations are performed to check the validity of the model, as well as to predict consequences when income and distance-decay effects are not properly treated. Finally, the suggested methodology is applied to two real cases. The estimation results from a structural model show that the calculated total benefit varies largely when income and distance-decay effects exist and are ignored. Also, an ad hoc model generates significantly different estimates from the utility difference model this study adopted. The difference in estimates suggests that the total benefit has to be estimated by a structural model.     

基于分段式电压采集法的天线绝缘检测技术研究

如今,短波发信伸缩天线、插拔鞭天线等大量应用于通信台站与舰船上,天线绝缘性能是其重要的考核指标,该参量关乎到天线的持久性与通信的稳定性。以天线绝缘电阻检测技术为研究对象,分析了天线绝缘检测手段的必要性与存在的不足,在普通绝缘检测技术的基础上,提出了一种基于分段电压采集法的绝缘检测方法,对信台站与舰艇上天线的设计、施工、调试、维修、以及现场系统联调等环节起到保障作用,改善了天线绝缘性能检测技术智能化、模块化、高精度等问题。     

汽车整车自然暴露试验评价方法前期研究

主要介绍汽车整车自然暴露试验评价方法,基于整车厂长期进行汽车整车自然暴露试验,对整车进行表观检测、性能检查及其他项目检测,通过分析试验结果,归纳汽车内外饰件常见缺陷,按照失效程度和不同部件类型,为整车耐候性进行等级划分,建立整车系统化评价方法。     

An analysis of end-of-life terminology in the carbon fiber reinforced plastic industry

While many studies and reviews into the practices conducted by industry and academia to recycle and remanufacture carbon fibre-reinforced plastic (CFRP) exist, to date no investigation exists which regards the correctness of the use of the terms recycling and remanufacturing. As such, this paper seeks to analyse the CFRP reuse industry’s attempt to recycle and remanufacture manufacturing waste CFRP and end-of-life (EOL) CFRP with an emphasis on the terminology used to describe these practices. Firstly, this paper presents a justification of the importance of using EOL terminology correctly; outlining the benefits and problems associated with using the correct and incorrect terminology. This paper finds that in the case of CFRP remanufacturing, terminology is being applied incorrectly and in the case of CFRP recycling, particular care should be taken when applying the term recycled to CFRP or stating that CFRP has been recycled. Further, this paper proposes new terminology (in keeping with EU directives) which could be adopted by industry and academia working in this area. This paper also finds that in the case of remanufacture, CFRP is incapable of being remanufactured.     

复杂气井套管力学分析与可靠度评价

为建立考虑地层和套管参数随机性的套管可靠度评价理论方法,以便得到复杂井况下套管传统设计安全系数与可靠指标之间的关系,提出了非均匀地应力和内压联合作用下,沿套管最大外挤力方向管壁任意位置发生屈服失效时外壁等效均匀外挤力的计算方法;建立了套管抗挤和抗内压三轴强度计算公式以及有效内压计算方法;根据套管载荷和强度影响因素统计参数以及评价过程中参数测试标准值,利用蒙特卡洛法（MC）建立了完整的套管可靠度计算和评价方法;通过实例对传统安全系数与可靠指标的对应关系进行了研究。研究结果表明:指定条件下,套管安全系数与可靠指标之间存在对应关系;利用建立的方法编制计算程序可以为传统设计法中安全系数代表的安全程度进行量化;可靠度评价方法能够为安全系数的选取提供指导。     

微波强化CWPO工艺CuO_x-CeO_2/GAC催化剂的制备及其对二甲亚砜的降解

以颗粒活性炭(GAC)为载体、铜为活性组分、铈为助剂组分、草酸钠为沉淀剂,采用浸渍焙烧法制得CuO_x-CeO_2/GAC催化剂。以H_2O_2为氧化剂,微波强化催化湿式过氧化氢氧化(CWPO)处理二甲亚砜(DMSO)初始质量浓度为1 000 mg/L的废水,处理3 min后DMSO去除率达93.8%。催化剂第7次使用时DMSO去除率仍保持在75%以上。初始废水pH在3~9范围内,DMSO去除率均在85%以上。助剂Ce的加入提高了催化剂表面活性组分的分散性和稳定性,使催化剂的活性稳定性和使用寿命显著提高。     

MoS_2/Bi_2S_3异质结光催化剂的制备及其光催化性能

以五水硝酸铋为铋源、钼酸钠为钼源、硫脲为硫源,采用简单的一步水热法合成了MoS_2/Bi_2S_3异质结光催化剂,采用XRD,SEM,TEM,BET,UV-Vis DRS技术对其进行了表征。表征结果显示,MoS_2纳米片在Bi_2S_3微棒表面生长,增加了比表面积和活性位点,并形成异质结构,促进了光生载流子的迁移,抑制了电子-空穴对的再复合。实验结果表明:钼酸钠与五水硝酸铋的质量比为1∶2时制备的复合光催化剂性能最好,反应180min时对亚甲基蓝的去除率可达96.4%,明显高于MoS_2和Bi_2S_3,且具有较高的稳定性;该催化剂对罗丹明B、甲基橙和4-硝基苯酚的去除率分别为97.1%、93.1%和90.5%,表明其对污染物具有普适性。     

钙钛矿型催化剂催化湿式氧化处理煤气化废水纳滤浓缩液

采用溶胶-凝胶法制备了Mn掺杂钙钛矿型催化剂LaFexMn1-xO3,并以其为催化剂催化湿式双氧水氧化处理煤气化废水纳滤浓缩液。采用XRD,SEM,FTIR技术对催化剂进行了表征。表征结果显示：制备的催化剂均具有标准的钙钛矿型结构,其中,LaFe0.9Mn0.1O3的结构稳定,比表面积大。实验结果表明：制备的催化剂中LaFe0.9Mn0.1O3的催化活性最高,且稳定性好,连续使用5次后催化活性未见明显减弱;在H2O2投加量3.0 g/L、n（H2O2）∶n（LaFe0.9Mn0.1O3）=12∶1、反应温度160 ℃、反应压力1 MPa、浓缩液pH 3、反应时间60 min的最优条件下,COD、UV254和TOC的去除率分别达到80.9%、95.2%和68.0%,BOD5/COD由0.02提升至0.40,可生化性大幅提高。