瑞典生活垃圾处理方式及效果分析

生活垃圾分类回收管理措施正在我国各大城市全面实施。通过对瑞典生活垃圾层级管理和4种处理方式的介绍,对瑞典垃圾回收再利用效果进行分析,为我国推进生活垃圾分类回收再利用工作,提供可借鉴经验和参考。     

生活垃圾强制分类形势下的多源废荧光灯管回收管理机制建议

废荧光灯管的来源广泛,包括工业来源和社会来源,社会来源又包括居民来源,企业事业单位、公共场所等机构来源,具有多来源的特性。废荧光灯管中含有汞,若不经过妥善处理,会造成环境污染,对人的身体健康造成危害。随着国内生活垃圾分类的开展,废荧光灯管作为生活垃圾中有害垃圾的典型类别被强制分类,但仍存在很多问题。本文梳理了我国废荧光灯管的产生情况、LED灯替代情况,并对美国、欧盟、日本和我国国内典型城市的废荧光管理情况进行了总结。针对我国废荧光灯管的回收现状,从责任主体、责任划分、收集渠道、资金机制等角度提出了相关的管理建议,为推动我国废荧光灯管的管理提供借鉴。     

An LC-MS/MS method for creatine and creatinine analysis in paraquat-intoxicated patients

Abstract

A sudden increase in serum creatinine after paraquat intoxication has been reported in several clinical studies. However, this dramatic change of creatinine may be possibly due to an interconversion of creatine-creatinine in relation to paraquat toxicity. In order to investigate the creatine-creatinine relationship, a liquid chromatography tandem mass spectrometry in combination with electrospray ionization was developed and validated for simultaneous determination of creatine and creatinine in the serum. The chromatographic separation was achieved on a Gemini® C₆-Phenyl column with a gradient elution consisting of 0.1% formic acid in ultrapure water and methanol as the mobile phase. The method yielded suitable levels of specificity and selectivity, and calibration curves of creatine and creatinine in serum were linear over the concentration range of 0.5–200?µg mL^?1. The limit of quantification of both compounds was 0.5?µg mL^?1, and the method was accurate within the recovery range of 96.23–102.75%, indicating the robustness of the method. The method was successfully applied to toxicological samples from paraquat-intoxicated patients, and the concentrations of creatine and creatinine were quantified. High creatine concentrations in serum samples were observed which may lead to high serum creatinine despite normal kidney function as creatine is converted to creatinine in proportion to its concentration.     

硫酸雾测试方法若干问题思考

简述了我国硫酸雾测试方法的发展历史,分析和总结了《固定污染源废气硫酸雾的测定离子色谱法》(HJ 544—2016)存在的一些争议和问题,包括硫酸雾的定义、测试方法的干扰控制等。分析认为,相比《硫酸工业污染物排放标准》(GB 26132—2010),HJ 544—2016对硫酸雾的定义更加合理。实验结果表明:硫酸盐是测试方法条件下的目标物,滤筒可以显著地捕捉硫酸盐。9组样品滤筒中,被测目标物所占比例为7.9%~69.1%;滤筒和前吸收液中,被测目标物所占比例为93.7%~97.8%。HJ 544—2016新增加的两级串联碱液吸收瓶可以较完全地捕集穿透滤筒后的硫酸雾,同时也会捕集SO2。SO2会对硫酸雾测试产生正干扰,约42.9%的SO2在被吸收后转化为硫酸雾。     

西南山地区域森林火险综合预报模型研究——以重庆市为例

森林火灾严重破坏森林生态系统的结构和功能,针对其风险预报开展研究具有重要的理论意义和应用价值。通过融合气象、地表覆盖和人类活动等要素的方式构建森林火险综合预报模型,是西南山地区域森林火险综合预报业务化应用的重要发展方向。基于《森林火险气象等级》国家标准(GB/T 36743-2018),本文研究首先构建了重庆市森林火险气象风险预报模型。然后通过融合可燃物因素和人为因素的方式,进一步构建重庆市森林火险综合预报模型。最后利用历史火点数据针对上述两类模型的精度进行对比和分析。研究结果表明:重庆市森林火灾发生次数较多,且呈现出季节性规律;重庆市森林火灾的发生不仅受到气象条件的影响,而且受到地表覆盖和人类活动等多种要素条件的共同影响;与森林火险气象风险预报结果相比,森林火险综合预报结果在空间分布上具有更高的精细程度;森林火险综合预报模型能有效提高森林火险等级预报精度。     

水库抗旱调度分期特征确定方法研究

为在一定程度上减轻流域干旱损失,国家防汛抗旱总指挥部提出旱限水位的概念,并开展水库抗旱调度,降低干旱影响程度。旱限水位是水库低水位运行的控制性水位,其合理设置对提高区域水资源利用率意义重大,而水文气象特征在年内的阶段性变化要求基于旱限水位的水库管理应适应其变化特征。此次研究提出水库抗旱调度分期的确定方法,采用核主成分分析法提取指标的非线性特征,结合熵权法赋予指标权重后利用Fisher最优分割法对干旱的年内阶段性变化进行划分。以黄河流域刘家峡和小浪底水库为例,分期结果刘家峡水库分3期为:7月至9月,10月至3月,4月至6月;小浪底水库分3期为:7月至10月,11月至3月,4月至6月。     

对氯气校正法测定高氯废水化学需氧量的方法研究

氯气校正法(HJ/T70-2001)是测定高氯废水化学需氧量的国标方法,为了减少样品测定过程带来的环境污染,研究在不改变HJ/T70-2001氧化体系及测试条件的情况下,将取样体积由20 mL减半为10 mL,试剂的使用量相应减半,对方法的检出限、相对误差、相对标准偏差等指标进行验证。结果表明,该方法的检出限符合要求,准确度较高,精密度较好,可用于高氯废水化学需氧量的测定。     

环境中的微塑料:赋存、检测及其危害

近年来,由个人护理品及废旧塑料直接或间接产生的微塑料不断地在各种环境介质中被检出,且微塑料会对生态系统产生各种危害,因此对微塑料的研究受到越来越广泛的关注。阐述了微塑料在水体、沉积物、沙滩和生物体中的赋存情况,介绍了微塑料的采集与分离方法,以及定性与定量分析方法。指出微塑料对环境及生物体产生的危害,提出现阶段研究存在的主要问题,并对今后的研究方向进行了展望。     

基于改进的SPAR-H化工实验室人因可靠性分析

近年来化工实验室事故屡禁不止,其中人的不安全行为是导致事故发生的主要原因.为评估实验人员可靠性,进一步管控化工实验室人的不安全行为,基于标准化工厂人因可靠性分析(SPAR-H)方法,结合化工实验室人因失误的特点,确定了更加适用于化工实验室的人因可靠性分析方法.首先依据"S-O-P"认知模型对人因失误类型进行划分;然后基...     

Fine-resolution mapping of wildfire fuel types for Canada: Fuzzy logic modeling for an Alberta pilot area

The Canadian Forest Fire Danger Rating System (CFFDRS) is used daily across Canada for evaluating forest fire danger. Fuel-type information is one of the inputs required by the models used in the CFFDRS. In this project, three fuel-type maps with a 25 m resolution were produced for a pilot study area located in Alberta using land cover only; land cover and biomass; and, land cover, biomass and leaf area index data derived from satellite imagery. The relationships between inputs and fuel types were determined mainly by the opinions of forest fire scientists and incorporated into a computer program using fuzzy set methodology. Not all the CFFDRS fuel types could be distinguished using these inputs; three of the coniferous types had to be grouped into one common fuel type. Overall accuracy was between 74 and 83% based on ground-truth comparisons. The most accurate map resulted from land cover and biomass data. Detailed accuracy assessment indicated that the overall accuracy increased up to 86% if ambiguous fuel type identification was considered. No combination of inputs was able to define a fuel type with absolute certainty, which is a reflection of differing expert opinions and the small number of inputs used to produce the maps.