电子废弃物中持久性有机污染物分析检测方法的研究进展

针对目前电子废弃物中持久性有机污染物(POPs)尚未形成有效快速分析检测方法的问题,介绍了溶剂萃取、固相萃取、微波萃取和超临界流体萃取等POPs前处理技术的研究进展,总结了POPs的分析方法,如:气相色谱、液相色谱、气相色谱-质谱法、高分辨率气相色谱-高分辨质谱法等化学分析方法,以及生物传感器测定法、表面胞质团共振检测法、酶联免疫检测法等生物分析方法。分析了各方法的优劣,并提出了展望。     

利用粉煤灰处理生活污水的试验研究

以火电厂贮灰场粉煤灰为吸附剂,以生、活污水为吸附对象,通过间歇吸附试验,分析了各因素对粉煤灰吸附性能的影响,并找出了粉煤灰对生活污水中化学耗氧物质(COD)的吸附规律。     

利用木薯渣进行纤维素分解菌混合发酵工艺研究

从自然界中筛选出6株相互间无拮抗作用的纤维素分解菌进行混合发酵,研究了该混菌以工业废弃物木薯渣为原料发酵的最佳产酶条件是:培养基配方为木薯渣4 g,黄豆粉0.75 g,KH2PO40.20 g,NaCl 0.02g,MgSO4·7H2O 0.015 g,蒸馏水1 000 mL;发酵工艺为初始pH=7.0,培养温度40℃,每250 mL锥形瓶装培养液140mL,接种量3%,在140 r·min-1转速下发酵72 h.结果表明,混合菌的发酵可大幅度提高纤维素酶活力及对还原糖的耐受力.     

钻井废液的固液分离工艺与设备

影响钻井废液固液分离的因素包括钻井废液的稀释比例、脱稳处理药剂的种类和加量、固液分离设备。文章介绍了钻井废液处理的基本流程,分析了钻井废液pH值对固液分离效果的影响,论述了卧式螺旋卸料沉降离心机的基本结构、设备参数和操作参数对固液分离效果的影响。     

基于固液分离预处理的餐厨垃圾厌氧发酵

研究不同预处理方法所获餐厨垃圾浆料的半连续式厌氧发酵效果,评价该类餐厨垃圾的产甲烷资源化潜能.结果表明,固液油三相分离预处理后的液相餐厨垃圾作为进料较固液混合相餐厨垃圾在厌氧发酵时具有更高的VS去除率,实际产甲烷潜能和甲烷转化率,分别为91.2％,531.5mLCH4/gVS和54.3％,表明液相餐厨垃圾半连续中温湿式...     

Volatilization of heavy metals during incineration of municipal solid wastes

Incineration experiments with MSW, which had been impregnated with heavy metals, were presented to obtain information on the volatilization behavior of the elements cadmium (Cd), lead (Pb), and zinc (Zn) under different conditions. Experiments were carried out in a bubbling fluid bed system connected to a customized inductively coupled plasma optical emission spectroscopy(ICP-OES) for analyzing metals in the flue gas. The results indicated that the combustion temperature, the gas atmosphere, and the chlorine content in the flue gas could affect the volatilization behavior of heavy metals. In the fluidized bed combustion, a large surface area was provided by the bed sand particles, and they may act as absorbents for the gaseous ash-forming compound. Comparer with the metals Cd and Pb, the vaporization of Zn was low. The formation of stable compounds such as ZnO.Al2O3 could greatly decrease the metals volatilization. The presence of chlorine would enhance the volatilization of heavy metals by increasing the formation of metal chlorides. However, when the oxygen content was high, the chlorinating reaction was kinetically hindered, which heavy metals release would be delayed.     

Application of environmentally conscious manufacturing strategies for an automotive component

Application of appropriate environmentally conscious manufacturing strategies enables the sustainable development of products and processes. Automotive component manufacturers recognise the potential of applying appropriate strategies for attaining Triple Bottom Line benefits. In this context, three strategies such as eco-efficiency, waste minimisation and material efficiency are being applied to minimise environmental impacts associated with the manufacture of automotive products and its associated processes. A case study of an automotive component manufacturing firm has been exemplified. After conducting the study, the potential environmental impact was reduced by 20% and eco-efficiency was improved by 13%. Further, improvements have been observed in terms of overall resource consumption and material efficiency. The overall power consumption was reduced by 18% and weight of the component was reduced by 11%. The study aimed at improving the sustainable performance of product by incorporating green and environmentally friendlier manufacturing practices.

Abbreviations: USEPA: United Nations Environmental Protection Agency; OECD: Organisation for Economic Co-operation and Development; WBCSD: World Business Council for Sustainable Development; Eco-QFD: Environmental Quality Function Deployment; WCED: World Commission on Environment and Development; LCA: Life Cycle Assessment     

温州临江垃圾焚烧发电厂飞灰的性质研究

研究了温州临江垃圾焚烧发电厂生活垃圾焚烧产生飞灰的物理和化学性质。飞灰为含水率低、颗粒尺寸集中在43~175μm之间的灰色粉末,主要由Si、Al、Ca、Mg、Fe、Na、K、C和S元素组成。飞灰中Pb、Cd的浸出浓度在酸性条件下都不同程度地高于我国危险废物鉴别标准的允许浓度,其中Pb的浸出浓度在pH值1.06~13.69条件下远远超标,碱性条件下浸出毒性比酸性条件下小。矿物组成主要为石英(SiO2)、赤铁矿αFe2O3、钙长石CaO.Al2O3.2SiO2、钙铝黄长石2CaO.Al2O3.SiO2、KCl、NaCl、CaCO、PbO、TiO2、ZnCO3等,溶解盐含量高达19.5%,化学反应活性较强,热稳定性较差。     

高温分解及烟气净化处理电子垃圾的技术和设备

提出高温分解及烟气净化处理废弃电子垃圾的技术。通过喷水系统调节分解炉内气氛,控制有机物分解速度,使有机物裂解成二氧化碳和水蒸气,有害成份经净化系统再次处理后达到环保排放标准。金属部分可进一步进行提炼回收,实现有机物和金属的绿色分离。     

废弃电器电子产品POPs/PTS减排环境管理实践研究

全球环境基金(GEF)"通过环境无害化管理减少电器电子产品的生命周期内持久性有机污染物和持久性有毒化学品(POPs/PTS)的排放全额示范项目"湖北省作为项目示范省之一.三家废弃电器电子产品拆解企业,分别开展了废弃电器电子产品拆解技术示范、湿法废弃印刷电路板处置BAT/BEP技术示范、利用再生铅连续熔炼炉协同处置阴极射线管含铅锥玻璃项目技术示范.电子废弃物全自动化分类与拆解生产线,为电子废弃物绿色循环与资源化提供了示范模式.