澳门城市垃圾焚烧底灰的重金属淋溶及其遗传毒性评价

应用美国国家环境保护局推荐的毒性特性溶出程序(toxicitycharacteristicleachingprocedure,TCLP),以及ICP-MS和ICP-AES技术研究了澳门城市垃圾焚烧底灰中重金属的淋溶,并结合蚕豆根尖微核试验评价了其潜在的生态与健康风险.结果显示,该底灰淋溶出来的重金属元素:铝(Al)、锰(Mn)、钴(Co)和汞(Hg)的浓度低于0.01mg·L-1,铁(Fe)、铜(Cu)和钼(Mo)的浓度低于0.1mg·L-1,而铬(Cr)、锌(Zn)、硒(Se)、锶(Sr)、钡(Ba)和铯(Cs)的浓度在0.11mg·L-1￣2.19mg·L-1之间.需要注意的是淋溶液中铅(Pb)的浓度异常高,最高可达19.06mg·L-1,超过了美国相关标准的上限(5mg·L-1);对比不同条件下底灰中重金属的淋溶情况,表明溶解作用和淋溶液的pH值是影响其淋溶的2个重要因素.蚕豆根尖微核试验显示各淋溶液处理组根尖细胞微核率明显升高,与阴性对照组相比具有显著性差异(p<0.05),表明各淋溶液具有遗传毒性;随着淋溶液中重金属浓度的增加,蚕豆根尖细胞所表现出来的毒性效应增强,表明重金属是淋溶液具有遗传毒性的重要原因.     

Environmental effects and risk control of antibiotic resistance genes in the organic solid waste aerobic composting system: A review

• ARGs were detected in livestock manure, sludge, food waste and fermentation dregs. • The succession of microbial community is an important factor affecting ARGs. • Horizontal transfer mechanism of ARGs during composting should be further studied. Antibiotic resistance genes (ARGs) have been diffusely detected in several kinds of organic solid waste, such as livestock manure, sludge, antibiotic fermentation residues, and food waste, thus attracting great attention. Aerobic composting, which is an effective, harmless treatment method for organic solid waste to promote recycling, has been identified to also aid in ARG reduction. However, the effect of composting in removing ARGs from organic solid waste has recently become controversial. Thus, this article summarizes and reviews the research on ARGs in relation to composting in the past 5 years. ARGs in organic solid waste could spread in different environmental media, including soil and the atmosphere, which could widen environmental risks. However, the conventional composting technology had limited effect on ARGs removal from organic solid waste. Improved composting processes, such as hyperthermophilic temperature composting, could effectively remove ARGs, and the HGT of ARGs and the microbial communities are identified as vital influencing factors. Currently, during the composting process, ARGs were mainly affected by three response pathways, (I) “Microenvironment-ARGs”; (II) “Microenvironment-microorganisms-ARGs”; (III) “Microorganisms-horizontal gene transfer-ARGs”, respectively. Response pathway II had been studied the most which was believed that microbial community was an important factor affecting ARGs. In response pathway III, mainly believed that MGEs played an important role and paid less attention to eARGs. Further research on the role and impact of eARGs in ARGs may be considered in the future. It aims to provide support for further research on environmental risk control of ARGs in organic solid waste.     

云南省城市生活垃圾处理温室气体排放特征

根据《IPCC国家温室气体清单指南》和《省级温室气体清单编制指南》方法,建立2018年云南省16个州(市)城市生活垃圾处理温室气体排放清单,包括生活垃圾填埋和焚烧处理过程,并分析了温室气体排放的时间分布、空间分布和影响因素等。结果表明;(1)2018年云南省生活垃圾处理温室气体总排放量为536万t CO_2当量,各州(市)间排放量差异明显,滇中经济发达地区和滇东北人口密度较高地区排放量明显高于滇西北地区。(2)2005—2018年,云南省生活垃圾处理排放的温室气体量增长了191.3%,温室气体排放组成发生明显变化,CH4比重不断下降,CO_2比重不断增加。(3)城镇人口数量、生活垃圾处理量、经济发展水平与温室气体排放量显著相关,其中人口数量更为明显。     

降解和压缩作用下城市生活垃圾的持水量变化

在自制的城市生活垃圾降解-压缩-渗流仪中开展了5组持水量试验,分别研究不同温度和逐级递增应力条件下新鲜高厨余垃圾的持水量随时间的变化,新鲜高厨余、新鲜无厨余和基本降解垃圾的持水量随应力的变化.试验结果表明：在恒定应力条件下,新鲜高厨余垃圾的持水量随时间呈指数下降,即MRC=a-b（1-exp（-ct^d））;在应力10kPa和室温（0～27℃）条件下,持水量下降较慢（c=0.003,d=1.18）;在应力10kPa和恒温（40±3℃）条件下,持水量下降较快（c=0.173,d=0.601）;应力从50kPa逐级递增至100kPa、200kPa和400kPa后,持水量分别瞬时下降3.0%、2.3%和1.9%;新鲜高厨余、新鲜无厨余和基本降解垃圾的持水量均随应力的对数呈线性下降,即MRC=m-n×lg（σ）;当应力从10kPa增大至400kPa时,新鲜高厨余、基本降解和新鲜无厨余垃圾的持水量分别从63.0%、46.5%和37.9%下降至46.0%、35.3%和30.4%.通过对比分析国内外持水量试验结果,揭示了在相同应力条件下新鲜垃圾持水量随厨余含量的增加而增大、不同组分老垃圾持水量基本相同的规律.分析了生化降解和应力压缩对新鲜高厨余垃圾持水量的影响机理,并提出了增大新鲜高厨余垃圾脱水速率和脱水量的工程建议.     

Removal of Eu3+, Ce3+, Sr2+, and Cs+ ions from radioactive waste solutions by modified activated carbon prepared from coconut shells

As a biomass agricultural waste material, coconut shells were used for the preparation of high-quality modified activated carbon. Chemical modification of the surface of the prepared activated carbon is done by oxidation using H₂O₂ and HNO₃, respectively. The surface area and pore volume of the coconut shells activated carbon are increased by the chemical modification, and followingly the removal of the metals is improved. The structural morphology and composition of the modified activated carbon coconut shells (MACCS) were evaluated by Fourier transform infrared (FTIR) spectra, thermogravimetric analysis–differential thermal analysis (TGA-DTA), scanning electron microscope (SEM), X-ray diffraction (XRD), surface area analysis (SAA), X-ray fluorescence (XRF), and carbon, hydrogen, nitrogen, and sulfur (CHNS) elemental analysis. The prepared MACCS has reasonably good chemical stability. The influence of solution pH, contact time, adsorbent dosage, adsorption temperature, initial metal concentrations, and interfering ions on the adsorption performance of the investigated ions onto the prepared sorbent was examined by a batch method. The selectivity sequence for sorption of Eu³⁺, Ce³⁺, Sr²⁺, and Cs⁺ ions on MACCS was found to be Eu^3+?>?Ce^3+?>?Sr^2+?>?Cs⁺. The saturation capacities of MACCS for the studied metal ions were found to be 136.84, 85.55, 69.85, and 60.00?mg?g^?1 for Eu³⁺, Ce³⁺, Sr²⁺, and Cs⁺ ions, respectively. The thermodynamic parameters, ΔH°, ΔS°, and ΔG° were also evaluated.     

Life cycle assessment of food waste home composting in Greece

Home composting is a waste prevention measure related to the management of the household's food waste, garden trimmings, and other smaller organic household waste streams. Thus, home composting is an alternative way of exploitation of the “biomass” generated from the households. It is an alternative to centralized composting. Biomass utilization is explicitly stated as a principle of green chemistry. The aim of this paper is presentation of the results of a case study dealing with the life cycle environmental assessment of home composting of food waste in households in Greece. The results of the study indicate that home composting is environmentally preferable over the current organic waste management situation in Greece.     

Characteristics of the stabilized/solidified municipal solid wastes incineration fly ash and the leaching behavior of Cr and Pb

Fly ash is a hazardous byproduct of municipal solid wastes incineration (MSWI). An alkali activated blast furnace slag-based cementitious material was used to stabilize/solidify the fly ash at experimental level. The characteristics of the stabilized/solidified fly ash, including metal leachability, mineralogical characteristics and the distributions of metals in matrices, were tested by toxic characteristic leaching procedure (TCLP), X-ray diffraction (XRD) and scanning electron microscopy-energy dispersive spectrometer (SEM-EDS) respectively. Continuous acid extraction was utilized to extract metal ions and characterize their leaching behavior. The stabilization/solidification procedure for MSWI fly ash demonstrates a strong fixing capacity for the metals by the formation of C-S-H phase, hydrated calcium aluminosilicate and ettringite. The stabilized/solidified fly ash shows a dense and homogeneous microstructure. Cr is mainly solidified in hydrated calcium aluminosilicate, C-S-H and ettringite phase through physical encapsulation, precipitation, adsorption or substitution mechanisms, and Pb is mainly solidified in C-S-H phase and absorbed in the Si-O structure.     

Environment and economic feasibility of municipal solid waste central sorting strategy: a case study in Beijing

Although Beijing has carried out municipal solid waste (MSW) source separation since 1996, it has largely been ineffective. In 2012, a “Green House” program was established as a new attempt for central sorting. In this study, the authors used material flow analysis (MFA) and cost benefit analysis (CBA) methods to investigate Green House’s environment and economic feasibility. Results showed that the program did have significant environmental benefits on waste reduction, which reduced the amount of waste by 34%. If the Green House program is implemented in a residential community with wet waste ratio of 66%, the proportion of waste reduction can reach 37%. However, the Green House is now running with a monthly loss of 1982 CNY. This is mainly because most of its benefits come from waste reduction (i.e., 5878 CNY per month), which does not turn a monetary benefit, but is instead distributed to the whole of society as positive environmental externalities. Lack of government involvement, small program scale, and technical/managerial deficiency are three main barriers of the Green House. We, thus, make three recommendations: involve government authority and financial support, expand the program scale to separate 91.4 tons of waste every month, and use more professional equipment/technologies. If the Green House program can successfully adopt these suggestions, 33.8 tons of waste can be reduced monthly, and it would be able to flip the loss into a profit worth 35034 CNY.

Open image in new window

     

稳定剂对电解锰废渣中高浓度可溶性锰稳定效果的影响

为满足大宗废渣经济性处理的需要,从碱性物质、磷酸盐、碳酸盐类药剂筛选出“物美价廉”稳定剂,考察了CaO、MgO和Ca10(PO4)6(OH)2及其与NaHCO3和Na3PO4的组合对电解锰废渣中的可溶性锰的稳定化效果,并采用矿物组成分析、锰价态分析和形态变化探讨可溶性锰固定机理.结果表明:投加10%MgO锰渣中可溶性锰固定率达到100%,9%CaO+5%NaHCO3和9%CaO+5%Na3PO4的组合实现可溶性锰固定率95%以上.上述3组稳定剂将可溶性Mn2+先转变为沉淀态锰进一步转变为高价态含锰物相.后两组中NaHCO3或Na3PO4的加入促进了Mn2+向Mn3+、Mn4+的转化.     

湿热水解预处理对餐厨废弃物液相物质转化的影响

设计湿热水解预处理温度(80、120、150和200 ℃)、时间(40、50、60和70 min)、加水量(40%、60%、80%和100%)的三因素四水平正交试验,研究湿热水解预处理对餐厨废弃物液相可浮油脱出量、ρ(COD_Cr)、糖类、ρ(VFA)(VFA为挥发性脂肪酸)等的影响. 结果表明:餐厨废弃物经湿热水解预处理后可浮油脱出量明显提高. 在150 ℃、加水量40%、处理60 min的湿热水解条件下,可浮油脱出量(67.7 mL/kg)最高,比未经预处理的对照组提高了2.65倍;同时,ρ(还原糖)和ρ(总糖)也达到最高,分别比对照组增加了16.29%和38.92%.随着温度升高和处理时间的延长,ρ(COD_Cr)不断升高,在200 ℃、加水量40%、处理70 min的湿热水解条件下,ρ(COD_Cr)最高为109.729 g/L,比对照组提高了1.39倍. 经湿热水解预处理后,ρ(VFA)也呈显著增加,在200 ℃、加水量100%、处理40 min的湿热水解条件下,ρ(VFA)达到最高,比对照组增加了66.26%.预处理后,ρ(乙酸)、ρ(丁酸)升高,ρ(乙醇)降低. 方差、极差综合分析表明,在湿热水解过程中,温度是影响餐厨废弃物液相物质转化的主控因子,其次是加水量和时间.