Vermicomposting as an advanced biological treatment for industrial waste from the leather industry

The leather industry (tanneries) generates high amounts of toxic wastes, including solid and liquid effluents that are rich in organic matter and mineral content. Vermicomposting was studied as an alternative method of treating the wastes from tanneries. Vermicompost was produced from the following tannery residues: tanned chips of wet-blue leather, sludge from a liquid residue treatment station, and a mixture of both. Five hundred earthworms (Eisenia fetida) were added to each barrel. During the following 135 days the following parameters were evaluated: pH, total organic carbon (TOC), organic matter (OM), cation exchange capacity (CEC), C:N ratio, and chromium content as Cr (III) and Cr (VI). The results for pH, TOC and OM contents showed decreases in their values during the composting process, whereas values for CEC and total nitrogen rose, indicating that the vermicompost reached maturity. For chromium, at 135 days, all values of Cr (VI) were below the detectable level. Therefore, the Cr (VI) content had probably been biologically transformed into Cr (III), confirming the use of this technique as an advanced biological treatment. The study reinforces the idea that vermicomposting could be introduced as an effective technology for the treatment of industrial tannery waste and the production of agricultural inputs.     

Olive oil mill wastewater for soil nitrogen and carbon conservation

In this work the application of two levels of N fertilizer (NH₄NO₃) dissolved in water or olive oil mill wastewater (OOMW) diluted 10 or 20 times in water, has been studied in relation to the properties of two soils (Loam and Silt-Clay-Loam). Also, the effect of irrigation water bubbled with CO₂ (Dissolved Inorganic Carbon, DIC) was studied. Nitrate N, ammonium N, total N, organic C (OC), and CaCO₃ contents were determined in the soil as well as pH, electrical conductivity (EC), oxidation–reduction potential (ORP), and absorbance at 250 and 360 nm.     

上海郊区小型沼气发展的前景与方向

文章介绍了上海郊区沼气开发利用的发展历程和现状,分析了上海沼气发展萎缩的原因,指出上海在节能减排的大形势、寻找合理的农村生活垃圾处理出路和解决小型禽畜养殖场的环境问题等压力下,对郊区的沼气发展产生了新的需求。而以小型养殖场为中心、吸纳农村有机生活垃圾的小型沼气系统则是上海郊区未来沼气发展的方向,也是新农村环境整治的可行途径。     

农林废弃物在去除废水重金属中的环境友好利用

评述了近年来国内外利用廉价农林废弃物去除废水重金属的研究进展.重点论述了化学改性处理的农林废弃物对重金属离子的吸附性能,并详细比较了改性前后及各种改性方法的吸附效率.改性处理明显提高了农林废弃物的吸附性能,一些改性的农林废弃物吸附剂对某些重金属离子具有良好的吸附性能,显示出广阔的应用前景.但在今后的研究中还应强化改性农林废弃物吸附剂表面结构表征、吸附作用机理和动力学的研究,开发新型高效的改性再生方法,并对废水处理成本进行详细评估.     

进口含金属物料的固体废物鉴别方法研究

基于已完成的112例进口含金属物料的固体废物鉴别实践,系统地介绍了进口含金属物料的申报品名及各品名所占比例,种类及各种类的特征、固体废物鉴别关键方法和每种鉴别结果所占比例,其中申报品名主要为矿石(砂),所占比例为51.8%;鉴别结果主要为冶炼渣,所占比例为37.5%。提出对于进口的含金属物料,通过测量主要成分和含量、最主要金属元素及典型重金属元素的含量、物相组成、矿相组成,对于极细的粉末等特殊物料,还需要粒度分析等辅助试验,确定其产生来源。如果确定属于金属冶炼过程中产生的副产物、污染控制设施或环境治理过程中产生的物料、含金属废料简单加工处理产物、矿物采选过程中产生的废弃物,那么鉴别物料属于固体废物。     

基于产生来源的固体废物鉴别研究

通过对美国、欧盟和日本的固体废物定义和范围,以及已完成的固体废物鉴别实例的研究,指出固体废物鉴别的关键点在于产生来源分析。提出依据产生来源,固体废物可以分为丧失原有使用价值的物质、生产过程中产生的副产物类物质、环境治理和污染控制过程中产生的物质、其他类物质4大类。如果待鉴别物质的产生来源属于该4大产生来源中的任何一类,则其属于固体废物。     

建筑垃圾对雨水径流中Cu的吸附特性

以砖混建筑垃圾为研究对象,采用人工模拟雨水,通过静态和动态吸附实验研究了不同粒径粒级建筑垃圾对雨水径流中Cu的吸附效果。结果表明,准二级动力学模型比准一级动力学模型能更好地描述建筑垃圾对Cu的吸附过程;Freundlich等温模型能较好地拟合其等温吸附过程;不同粒径粒级建筑垃圾均对雨水径流中的Cu具有较好的净化效果,去除率均超过90%,粒径粒级越小,对Cu的净化效果越好,但其渗透性能越差;建筑垃圾的粒径粒级对Cu的吸附平衡时间、吸附速率和吸附量具有重要影响,粒径粒级2.36~4.75 mm的建筑垃圾对Cu的平衡吸附速率和平衡吸附量最大,分别为4.1μg/min和12.4μg/g。     

The fate of recombinant plasmids during composting of organic wastes

Composting was investigated as a means for safe disposal of organic waste containing bacteria that carry transgenes in recombinant plasmids. To generate model recombinant plasmids, a mobile IncQ plasmid, RSF1010, and a non-mobile plasmid, pGFP, were genetically modified to carry a DNA segment encoding both green fluorescent protein and kanamycin resistance and were designated as RSF1010-GFPK and pGFPK. Escherichia coli (E. coli) C600 harboring these plasmids were inoculated into chicken manure specimens that were placed in compost at 20 and 60 cm from the bottom of a 1.0-m high compost bin. Control specimens were held at ambient temperature. By day 10, compost temperatures at the lower and upper levels of the bin had reached 45.3 and 61.5°C, respectively, and at both levels the target E. coli had been inactivated and the plasmids had lost their capacity to be transformed or mobilized. Furthermore, based on real time Polymerase chain reaction (PCR), the transgene fragments along with the host chromosomal DNA fragment from specimens at the upper level had been degraded beyond the detection limit. However, at the lower level where temperatures remained below 48°C these fragment persisted to day 21. At ambient temperatures (0–8°C), the E. coli, plasmids and the transgene fragments persisted in manure specimens throughout the 21 day test period. The study showed the potential for composting as a safe procedure for disposal of bacteria carrying transgenes in recombinant plasmids.     

Effect of inoculation methods on the composting efficiency of municipal solid wastes

Four types of inoculation methods were studied during the composting of municipal solid wastes and dry grass (MSWG). The methods included a control group as well as initial-stage, two-stage, and multi-stage inoculations. Fulvic acids were extracted from the composting materials and characterized by spectroscopic techniques. The results showed that inoculation of microbes in MSWG enhanced the biodegradation of aliphatics, proteins, and polysaccharides. The inoculation also increased the molecular weight, humic- and fulvic-like compound content, as well as humification degree of the composting products. The inoculation of microbes in MSWG significantly improved composting process and efficiency. The improvement efficiency was in the order of initial-stage < two-stage < multi-stage inoculations. Inoculation of microbes based on composting organic matter composition and temperature enhanced composting efficiency.     

医疗废物焚烧处理核心技术的开发及应用

国内已建成的医疗废物焚烧设施目前普遍存在进料系统不稳定、玻璃结渣和高浓度HCl气体的排放的问题。这些技术难点已成为医疗废物焚烧处置行业发展的瓶颈。本文介绍了可解决上述问题的"可调节医疗废物恒流量进料技术"、"医废焚烧防玻璃结渣技术"和"含高浓度氯化氢医废尾气处理技术"三项医疗废物焚烧处理核心技术的主要特点及技术指标与应用实例。