BUILDUP,WASHOFF, AND EVENT MEAN CONCENTRATIONS1

ABSTRACT: Most watershed water quality simulation models require the user to specify pollutant buildup and washoff rate parameters for pollutants, by land use. Buildup and washoff rates are difficult to measure directly, and only limited guidance and few observed data are available from the literature. Many studies, however, report storm event mean concentrations (EMCs). These EMCs must arise as a result of the buildup and washoff processes, but typically represent the net contribution from a variety of pervious and impervious surfaces. This paper explores the relationship between EMCs and buildup/washoff parameters. An assumption of the mathematical form of the buildup/washoff relationship gives an algebraic expression for the EMC consistent with model assumptions. This yields techniques to separate observed EMCs into contributions from different land uses and from pervious and impervious surfaces. Given this relationship, numerical optimization may be used to estimate site specific values of buildup and washoff parameters from observed storm EMCs for use in modeling. Use of this approach helps ensure that model parameters are consistent with observed data, providing a rational starting point for final model calibration. Several site examples demonstrate use of the method.     

USE OF STAGE DATA TO CHARACTERIZE HYDROLOGIC CONDITIONS IN AN URBANIZING ENVIRONMENT1

ABSTRACT: This paper presents the results of a study on the use of continuous stage data to describe the relation between urban development and three aspects of hydrologic condition that are thought to influence stream ecosystems—overall stage variability, stream flashiness, and the duration of extreme‐stage conditions. This relation is examined using data from more than 70 watersheds in three contrasting environmental settings—the humid Northeast (the metropolitan Boston, Massachusetts, area); the very humid Southeast (the metropolitan Birmingham, Alabama, area); and the semiarid West (the metropolitan Salt Lake City, Utah, area). Results from the Birmingham and Boston studies provide evidence linking increased urbanization with stream flashiness. Fragmentation of developed land cover patches appears to ameliorate the effects of urbanization on overall variability and flashiness. There was less success in relating urbanization and streamflow conditions in the Salt Lake City study. A related investigation of six North Carolina sites with long term discharge and stage data indicated that hydrologic condition metrics developed using continuous stage data are comparable to flow based metrics, particularly for stream flashiness measures.     

长江铜陵段表层水中重金属含量及存在形态分布研究

通过测定长江铜陵段枯、丰水期江水中cu、Pb、Zn和cd不同形态的含量,分析了4种金属在江水中的存在形态分布,不同水期含量变化,水中悬浮物对金属吸附能力大小,以及近20年来含量的变化情况。结果表明,长江铜陵段江水中各重金属总量丰水期时大于枯水期,重金属各形态含量之间均有差异:丰水期时,各金属会被悬浮物以不同的方式携带进入水体中,cu、zn、Pb以活跃态和稳定态为主,Cd以活跃态为主;枯水期时,Zn主要以溶解态和稳定态为主,Pb以稳定态方式被携带,而80％的Cu、Cd是以溶解态形式存于水中。悬浮物(丰水期)对重金属的吸附能力大小顺序为Pb>Cu>Zn>Cd。与近20年江水中的重金属背景值比较,长江铜陵段重金属含量有普遍升高的趋势。     

关于污水处理厂质量监理工作的探讨

污水处理已引起我国政府的高度重视。以此为契机，通过对阳江市第一净水厂工程监理工作的回顾，初步探讨了污水处理厂质量监理工作。     

污水处理厂自动化监控系统

自动化技术在能源、电力、机械、环境等行业的应用越来越广泛，也促使了自动化水平的不断提高。由于Synall2000强大的网络化功能，为将来系统在子网级和企业级实施基于Synall2000网络化数据监控系统打下了坚实、可靠的基础。在全面实施单个站点自动化监控的基础上，可方便地实现子网级的网络化数据自动采集与监控系统。     

准噶尔盆地油田开发区土地沙漠化防治研究--以石西、莫北油田为例

通过对准噶尔盆地石西油田、石南油田、莫北油田等开发利用区土地沙漠化现状和特点的分析，对油田开发活动引起的水土流失进行了预测，并对产生的新的土地沙漠化现象和水土流失对油田区道路、管线、油区的影响进行了分析，提出了针对钻井井场、道路、输油气管线等的分区防治措施。     

使用清洁能源,改善煤烟型污染城市大气质量--可再生能源水源热泵技术的应用

本文从热泵工作原理入手，阐述了可再生能源水源热泵技术替代解决燃煤城市冬季采暖的能源问题，进而为改善大气环境质量，推广应用清洁能源做一有益的尝试。同时也为治理乌鲁木齐市的大气污染及调整能源结构提出了一条新思路。     

INTEGRATING SERVICE‐LEARNING INTO WATERSHED MANAGEMENT PROGRAMS: OPPORTUNITIES AND CHALLENGES1

ABSTRACT: The objective of this article is to open a dialogue on integrating service‐learning into community based watershed management programs and to discuss opportunities and challenges that a service‐learning program presents to universities and communities. The article presents the concept and definition of service‐learning, and arguments concerning why institutions of higher education and university faculty and students should be involved with community based watershed management programs. The article describes a case study for developing a service‐learning program for watershed management at Virginia Tech and discusses lessons learned from the case study. The paper concluded that to make a service‐learning program sustainable, there should be a long term plan, regular and effective communication with the stakeholders, and some incentives for faculty and students for long term commitment to the community based watershed management programs.     

COMPARATIVE STUDY OF OPTIMIZATION TECHNIQUES FOR IRRIGATION PROJECT PLANNING1

ABSTRACT: This study presents three optimization techniques for on‐farm irrigation scheduling in irrigation project planning: namely the genetic algorithm, simulated annealing and iterative improvement methods. The three techniques are applied to planning a 394.6 ha irrigation project in the town of Delta, Utah, for optimizing economic profits, simulating water demand, and estimating the crop area percentages with specific water supply and planted area constraints. The comparative optimization results for the 394.6 ha irrigated project from the genetic algorithm, simulated annealing, and iterative improvement methods are as follows: (1) the seasonal maximum net benefits are $113,826, $111,494, and $105,444 per season, respectively; and (2) the seasonal water demands are 3.03*10³ m³, 3.0*10³ m³, and 2.92*10³ m³ per season, respectively. This study also determined the most suitable four parameters of the genetic algorithm method for the Delta irrigated project to be: (1) the number of generations equals 800, (2) population size equals 50, (3) probability of crossover equals 0.6, and (4) probability of mutation equals 0.02. Meanwhile, the most suitable three parameters of simulated annealing method for the Delta irrigated project are: (1) initial temperature equals 1,000, (2) number of moves equal 90, and (3) cooling rate equals 0.95.     

COALBED METHANE PRODUCT WATER CHEMISTRY IN THREE WYOMING WATERSHEDS1

ABSTRACT: The Powder River Basin in Wyoming has become one of the most active areas of coalbed methane (CBM) development in the western United States. Extraction of methane from coalbeds requires pumping of aquifer water, which is called product water. Two to ten extraction wells are manifolded into one discharge point and product water is released into nearby unlined holding ponds. The objective of this study was to evaluate the chemistry, salinity, and sodicity of CBM product water at discharge points and associated holding ponds as a function of watershed. The product water samples from the discharge points and associated holding ponds were collected from the Cheyenne River (CHR), Belle Fourche River (BFR), and Little Powder River (LPR) watersheds during the summers of 1999 and 2000. These samples were analyzed for pH, electrical conductivity (EC), total dissolved solids (TDS), alkalinity, sodium (Na), calcium (Ca), magnesium (Mg), potassium (K), sulfate (SO₄^2‐), and chloride (C^1‐). From the chemical data, practical sodium adsorption ratio (SARp) and true sodium adsorption ratio (SARt) were calculated for the CBM discharge water and pond water. The pH, EC, TDS, alkalinity, Na, Ca, Mg, K, SARp, and SARt of CBM discharge water increased significantly moving north from the CHR watershed to the LPR watershed. CBM discharge water in associated holding ponds showed significant increases in EC, TDS, alkalinity, Na, K, SARp, and SARt moving north from the CHR to the LPR watershed. Within watersheds, the only significant change was an increase in pH from 7.21 to 8.26 between discharge points and holding ponds in the LPR watershed. However, the LPR and BFR exhibited larger changes in mean chemistry values in pH, salinity (EC, TDS), and sodicity (SAR) between CBM product water discharges and associated holding ponds than the CHR watershed. For instance, the mean EC and TDS of CBM product water in LPR increased from 1.93 to 2.09 dS/m, and froml,232 to 1,336 mg/L, respectively, between discharge and pond waters. The CHR exhibited no change in EC, TDS, Na, or SAR between discharge water and pond water. Also, while not statistically significant, mean alkalinity of CBM product water in BFR and LPR watersheds decreased from 9.81 to 8.01 meq/L and from 19.87 to 18.14 meq/L, respectively, between discharge and pond waters. The results of this study suggest that release of CBM product water onto the rangelands of BFR and LPR watersheds may precipitate calcium carbonate (CaCO₃) in soils, which in turn may decrease infiltration and increase runoff and erosion. Thus, use of CBM product water for irrigation in LPR and BFR watersheds may require careful planning based on water pH, EC, alkalinity, Na, and SAR, as well as local soil physical and chemical properties.