The occurrence of antihistamines in sewage waters and in recipient rivers

Background, aim and scope  Each year, large quantities of pharmaceuticals are consumed worldwide for the treatment and prevention of human and animal diseases. Although the drugs and the metabolites observed in the wastewaters and in the environment are present at concentrations several orders of magnitude lower than the concentrations required to exert their effects in humans or animals, their long-term impact on the environment is commonly not known. In this study, the occurrence of six antihistamines, which are used for the relief of allergic reactions such as hay fever, was determined in sewage treatment plants wastewaters and in recipient river waters. Materials and methods  The occurrence of the antihistamines cetirizine, acrivastine, fexofenadine, loratadine, desloratadine and ebastine in sewage treatment plants wastewaters and in recipient river waters was studied. The analytical procedure consisted of solid-phase extraction of the water samples followed by liquid chromatography separation and detection by a triple-quadrupole mass spectrometer in the multiple reaction mode. Results  Cetirizine, acrivastine and fexofenadine were detected in both influent and effluent wastewater samples at concentration levels ranging from about 80 to 220 ng/L, while loratadine, desloratadine and ebastine could not be detected in any samples. During sewage treatment, the concentration of the antihistamines dropped by an average of 16–36%. Furthermore, elevated concentrations of antihistamines were observed in samples collected during the season of most intensive plant pollen production, i.e. in May. In the river water samples, the relative pattern of occurrence of cetirizine, acrivastine and fexofenadine was similar to that in the wastewater samples; although the concentration of the compounds was substantially lower (4–11 ng/L). The highest concentrations of the studied drugs were observed near the discharging point of the sewage treatment plant. Discussion  The highest concentrations of antihistamines in STP wastewaters correlate with the outbreak of allergic reaction caused by high amounts of plant pollens in the air. The analysis results of the river water samples show that the antihistamines are carried far away from the effluent discharge points. They may account for a part of the mix of pharmaceuticals and of pharmaceutical metabolites that occur downstream of STPs. Conclusions  Antihistamines are poorly degraded/eliminated under the biological treatment processes applied in the wastewater treatment plants and, consequently, they are continuously being discharged along with other drugs to the aquatic environment. Recommendations and perspectives  As a huge quantity and variety of drugs and their metabolites are continuously discharged to rivers and the sea, the compounds should be considered as contaminants that may possess risks to the aquatic ecosystem. Further studies are urgently needed on the environmental fate of the antihistamines and other pharmaceuticals in the aquatic environment. These studies should be concerned with the stability of the compounds, their transformation reactions and the identity of the transformation products, the distribution of drugs and their uptake and effects in organisms. On the basis of these studies, the possible environmental hazards of pharmaceuticals may be assessed.     

Study of the comparative dynamics of the incorporation of tissue free-water tritium (TFWT) in bulrushes (Typha latifolia) and carp (Cyprinus carpio) in the Almaraz nuclear power plant cooling reservoir

The Almaraz nuclear power plant (Spain) uses the water of Arrocampo reservoir for cooling, and consequently raises the radioactive levels of the aquatic ecosystem of this reservoir. From July 2002 to June 2005, monthly samples of surface water, bulrushes (Typha latifolia) and carp (Cyprinus carpio) were collected from this reservoir. They were analyzed to determine the temporal evolution of the levels of ³H in surface water and of its transfer from the surface water to free-water in the tissues (TFWT) of the aforementioned two organisms. The tritium levels in the surface water oscillate with a biannual period, with their values in the study period ranging between 53 and 433 Bq/L. The incorporation of tritium to bulrushes and carp was fairly similar, the respective mean concentration factors being 0.74 and 0.8 (unitless, as Bq/L tissue water per Bq/L reservoir water). The temporal evolution of the levels fairly closely followed that observed for the surface water tritium, although detailed analysis showed the dominant periodicity for the bulrushes to be annual. This difference reflects the influence on the incorporation of tritium to bulrushes of diverse environmental and metabolic factors, especially evapotranspiration and the seasonal growth of this plant.     

我国城乡环保一体化的制度建构:理念、原则与路径

近年来,我国"城市环境趋向好转,农村环境不断恶化"这种城乡环境二元趋势的凸现,提出了城乡环保一体化的客观要求."城市中心主义"环境法制以及我国农民实质自由的严重匮乏是我国产生城乡环境二元趋势的根本原因.一些地方所采取的仅仅局限于环保领域的城乡环保一体化措施,并不能从根本上扭转城乡环境二元趋势.城乡环保一体化实践需要以更为全面的制度建构为基础.城乡环保一体化的制度建构应树立理性、人本、自由等基本理念,应坚持整体推进、科学建构、多元参与等基本原则.城乡环保一体化的制度建构路径,首先是消除对农民的各种制度性歧视,实现城乡居民的权利平等;其次,在推动地方民主与法治建设,推进司法体制改革、建立司法审查制度的基础上,健全与完善农民权利实现的保障机制,保证农民的各项权利最终成为"可实际行使"的权利.最后,还要建立适应农村环境保护要求的环境法制.     

基于水质的水资源模型与水质经济学初探

在对传统的以水量为核心的水资源模型理论与实践矛盾的分析基础上,阐述了水资源社会及自然循环规律,提出城市-流域系统中水资源利用的水质自然与人工再生过程和自然、人工修复的双要素.提出水质再生和水量循环的水资源模型及其假设和约束条件,确定了模型适用的边际条件和范围,据此进一步辨析了城市污水回用与再生水的异同,将再生水置于流域尺度的城市群上下游用户层面,提出污水回用(包括中水利用)是降低需求,再生水是增加总量的基本结论.在以水质为核心的水资源模型基础上,对现有水资源经济学定义进行了修正和补充,提出了水质经济学的基础概念,并讨论了水质经济学指导下的供水服务和价格模型结构,重新定位了再生水的战略并提出以流域水体的净化成本和人工水质改善成本共同形成的全成本高低来表征流域水资源短缺程度的缺水等级划分新思路.     

复合沸石滤床修复北方景观水体的实验研究

以天然矿物质沸石、细砂及煤渣取代传统滤料构建复合基质生态床,表面种植景观植物,采用下向流-上向流运行方式修复北方景观水体。分别进行静态实验及不同循环速率下的动态实验,考察对水体污染物去除过程。结果表明,2种运行方式下对水体NH⁺₄-N去除率都在85%以上,其中以1 h为循环周期的运行方式去除率达97%,较静态提高12.8%;TN去除率最高为84%;TP去除不稳定,过程缓慢。煤渣层对NH⁺₄-N的去除效果差,硝化作用不彻底与反硝化作用的加强使下层出水NH⁺₄-N 、NO^-₂-N及NO^-₃-N浓度均高于上层。提高循环速率有利于对氮的去除。     

基于超临界水氧化过程的能源环境系统设计

阐述了超临界水氧化过程的工艺路线,介绍了超临界水氧化过程的特点,提出了基于超临界水氧化过程的能源环境系统,设计了几种热量与能量回收系统程的耦合工艺,为提高超临界水氧化过程的经济性奠定了基础。     

Seven thousand years in the service of humanity—the history of copper, the red metal

Measured by weight, copper is the third most important metal used by man. The annual value of its 2007 output was on a par with the GDP of e.g. Ukraine. Copper is also one of the oldest metals, its employment going back 7000 years. For millennia, it was predominantly employed for decorative purposes, coinage and in warfare. Technical breakthroughs in antiquity, like smelting and alloying, expanded its production and enhanced its utility. Copper's true heyday occurred after 1850, with the usage of electricity. In the period since then, volumes increased 300-fold, while costs and prices declined. With impressive progress in the technology of its production and consumption, the red metal has been able to hold its own, despite the emergence over history of formidable substitutes like iron, aluminum, plastics and optic fiber.     

Determination of direct and fugitive PM emissions in a Mediterranean harbour by means of classic and novel tracer methods

Remodelling works are frequent in harbour areas, given that they must adapt to rapidly changing market requirements. Depending on their nature (construction, demolition, etc.), these works may be carried out during long periods of time and thus exert a significant impact on the air quality at the harbours and their surroundings. The air quality at the Valencia harbour was studied during an enlargement project. Four sampling stations aimed to cover the major dust-emitting activities in the harbour. In addition, a sampling campaign was carried out to collect dust materials at their emission sources (e.g., loading and unloading of clinker and petroleum coke, as well as the enlargement works). Differences obtained between PM levels at the monitoring sites were correlated with the distance between sampling stations and enlargement works and/or harbour operations, as well as with the preferential wind direction. In all cases, the days with the highest PM_10 levels were linked to wind directions coinciding with the location of the enlargement works or the clinker and petroleum coke stocks. Classic source apportionment methodologies (PCA and CMB) were applied to the data, but their interpretation was complex due to the similar chemical signatures of PM originating from direct and fugitive emissions from stocked materials (e.g., clinker), and the enlargement works. To overcome this difficulty, a novel non-statistical approach was used to obtain quantitative estimations of the contributions from sources (petroleum coke and clinker), based on the correlation between specific PM components (e.g., carbonaceous species) and source tracers (e.g., V). Finally, a qualitative test using phenolphthalein was devised to identify the presence of clinker on the filters, which provided positive results. This novel tracer approach is thus recommended for harbour authorities.     

Removal of an anionic dye (Acid Blue 92) by coagulation–flocculation using chitosan

Chitosan (a biopolymer) is an aminopolysaccharide that can be used for the treatment of colored solutions by coagulation–flocculation (as an alternative to more conventional processes such as sorption). Acid Blue 92 (a sulfonic dye) was selected as a model dye for verifying chitosan's ability to treat textile wastewater. A preliminary experiment demonstrated that chitosan was more efficient at color removal in tap water than in demineralized water, and that a substantially lower concentration of chitosan could be used with tap water. Dye removal reached up to 99% under optimum concentration; i.e., in terms of the acidic solutions and the stoichiometric ratio between the amine groups of the biopolymer and the sulfonic groups in the dye. The flocs were recovered and the dye was efficiently removed using alkaline solutions (0.001–1 M NaOH solutions) and the biopolymer, re-dissolved in acetic acid solution, was reused in a further treatment cycle.     

Screening analysis of volatile organic contaminants in commercial inorganic coagulants used for drinking water treatment

A method for quality screening is suggested to detect volatile impurities in inorganic coagulants that are used for drinking water treatment. Static headspace gas chromatography with mass spectrometry detection (HS–GCMS) is sensitive and selective to detect volatiles in low concentrations. This study has discovered that volatile organic impurities are detectable in ferric and aluminium-based coagulants which are used for drinking water treatment. For ferric chloride, 2-propanol was detected at a level of 17–24 μg ml⁻¹, acetone at 0.7–1.7 μg ml⁻¹, 1,1,1-trichloroacetone at 0.02–0.04 μg ml⁻¹, trichloromethane at 0.01–0.02 μg ml⁻¹ and toluene at 0.01–0.12 μg ml⁻¹. For ferric chloride sulfate, acetone was detected at a level of 0.12 μg ml⁻¹, 1,1,1-trichloroacetone at 0.06–0.08 μg ml⁻¹, trichloromethane at 0.13–0.23 μg ml⁻¹, bromodichloromethane at 0.04–0.06 μg ml⁻¹ and dibromochloromethane at 0.04–0.05 μg ml⁻¹. For aluminium hydroxide chloride, only trichloromethane was detectable, but below the method detection limits (MDL). Although the concentrations of these impurities in commercial coagulants are low, this observation is important and should have impact on water industries for them to pay attention to the chemicals they are using for drinking water production.