辅料配比对污泥生物-物理联合干燥的影响

利用自主研制的污泥生物-物理联合干燥反应系统研究了脱水污泥∶树皮∶回流污泥分别为7∶3∶0.5、9∶3∶0.5和12∶3∶0.5时,污泥生物-物理联合干燥过程中温度、含水率等参数的变化规律.结果表明,污泥温度随干燥时间延长先增大后减小,含水率在0～96 h逐渐降低,继续延长反应时间,则变化不明显.当脱水污泥∶树皮∶回流...     

改进的模糊层次分析法在南苕溪临安段水质评价中的应用

南苕溪是太湖的源头水系,其水质状况对杭嘉湖平原居民饮用水安全和太湖流域的污染治理有重要意义.为了了解南苕溪的水质状况,在临安段开展了2年的水质监测,分别在2009年7月、10月和2010年1月、4月采集了水样并进行水质评价.同时,为了克服以往模糊层次分析法存在的低估污染的严重性及不能评价劣Ⅴ类水质的缺点,建立了一个改进...     

基于CFD的内构件强化内循环流化床流场结构分析

针对流化床内部流体结构的复杂性和缺乏有效放大设计理论的问题,以漏斗型导流内构件强化的内循环流化床的气液运动为研究对象,利用欧拉-欧拉双流体模型构建了能描述其复杂流动的CFD数学模型,通过宏观流场、气含率分布、液体速度分布解析内构件对气液混合传质的作用原理.数值模拟结果表明:双流体模型能较好地揭示流化床内气液流场结构,流...     

城镇污水处理排放标准改革的费效分析

从费用效果角度对提高城镇污水处理排放标准的科学性和可实施性进行探讨,利用污染源普查数据,通过城镇污水治理投资和运行函数的构建,计算不同处理规模和排放标准下的污水处理投资和运行费用,在全国层面上计算提高污水处理排放标准所需费用和污染物的减排效果.研究表明：污水处理厂的投资和运行费用的增加随着污水处理规模的增加而递减.以污...     

闽江下游突发性水污染事故时空模拟

以闽江下游为例,基于有限元法建立闽江下游水动力模型及水质模型,通过对模型进行率定和验证,表明该模型具有较理想的模拟效果.在此基础上,利用闽江下游2004年的水文情况,模拟了突发性水污染事故中污染物的运移扩散过程.定量模拟了突发性水污染事故发生后,闽江下游不同地点处污染物到达的时间和浓度值,并对突发风险事故的影响范围、程...     

An environmental impact assessment of quantum dot photovoltaics (QDPV) from raw material acquisition through use

Some emerging technologies are expected to be pivotal for solving many of the environmental challenges faced today, especially those related to energy. However, many of these technologies may incur significant environmental impacts over their life cycle, while having environmental benefits during their use. This paper presents results of a Life Cycle Assessment (LCA) of a proposed type of nanophotovoltaic, quantum dot photovoltaic (QDPV) module. The LCA is confined to the stages of raw materials acquisition, manufacturing, and use. The impacts of QDPV are compared with other types of PV modules and energy sources - both renewable and nonrenewable. To provide a comprehensive comparative assessment, QDPV modules were compared with mature as well as emerging PV types for which data are available. Comparative assessment with other types of energy sources includes coal, oil, lignite, natural gas, diesel, nuclear, wind, and hydropower.QDPV modules may have the potential to overcome two current barriers of solar technology: low efficiencies and high manufacturing costs. If higher efficiencies are realized, QDPV modules could pave the way to large scale implementation of solar energy, helping nations move toward greater energy independence. On the other hand, candidate materials as quantum dots for solar cell applications are mostly compound semiconductors such as cadmium selenide, cadmium telluride, and lead sulfide which may be toxic and for which renewable options are limited. Toxic effects of these materials may be exacerbated by their nanoscale features.The LCA was carried out using the software SimaPro, and the Ecoinvent Life Cycle Inventory (LCI) database supplemented with available literature and patent information. Our results indicate that while QDPV modules have shorter Energy PayBack Time (EPBT), lower Global Warming Potential (GWP), SO_x and NO_x emissions than other types of PV modules, they have higher heavy metal emissions, underscoring the need for investigation of emerging technologies, especially nano-based ones, from a life cycle perspective. QDPV modules are better in all impact categories assessed than carbon-based energy sources but they have longer EPBT than wind and hydropower and higher GWP.     

The water supply footprint (WSF): a strategic planning tool for sustainable regional and local water supplies

This paper introduces a new methodological approach of the ecological footprint explicitly addressing the sustainability of water supplies, which we call the water supply footprint (WSF). The WSF calculates the catchment area or water supply hinterland of a certain society and can serve as a strategic planning tool for local or regional water supplies linking the water demand with the water supply in a water supply footprint matrix. Based on regional water balances it estimates how much water can be appropriated for human use in an environmentally sustainable way.The proposed method is tested on the South East Queensland water supply in Australia, an area where water use restrictions are regularly imposed on the population. Applying the proposed method indicates that supply shortages may be avoided by considerably changing the organisation of water supply, thereby reducing and possibly even avoiding the necessity for large-scale supply side measures like additional sweet water reservoirs or desalination plants. In that way it is demonstrated that the WSF method is applicable at an early and strategic stage of water supply planning.     

重庆市2004年的水足迹分析

把水足迹分析方法作为一个实用的工具,用来分析一个国家或地区的生产结构或消费方式是如何影响水资源的利用,是当前国际水资源领域研究的一个热点。而研究一个国家或地区如何通过客观评价水足迹来减少国内水资源压力、如何通过虚拟水贸易来获得最大的利益则是水足迹分析方法的两个发展方向。首先介绍了水足迹分析法的基本理论和研究方法,接着计算了重庆市2004年的水足迹。结果表明,重庆市2004年的水足迹为37017×108 m3,人均水足迹为1 177 m3／a,水自给率为9869％,过高的水足迹和自给率给重庆市的水资源带来巨大的压力。同时也分析了产生这么高水足迹的原因,并探讨了水足迹对重庆市水资源管理的启示和战略意义。最后对该方法及其应用前景进行了评价。     

应用景观生态学原理构建城市河道生态护岸

首先分析了传统水工设计中护岸的弊端,然后从景观生态学角度介绍了岸坡生态系统的主要特征、生态护岸的多种功能和景观生态学内涵;介绍了国内外生态护岸的研究现状,提出了城市河道在生态护岸设计中应在保证稳定安全的前提下,坚持生态优先的原则,重视其景观性和亲水性;最后对生态护岸的材料与植物群落的选择进行了分析。旨在探讨河流生态治理的方法,为生态护岸的构建与河流、洪泛区的治理提供一定的思路和参考。     

汉江下游水污染协同控制探讨

以一维河流单种污染物的水污染协同控制理论为基础,以汉江武汉段水质达到国家III级为目的,探讨了河流的水污染控制量。根据各排污口的实测CODCr、BOD5、NH3-N浓度和排放流量,结合河流的流量和水质标准,得出汉江武汉段的水污染协同控制量。计算结果表明,汽配排污口BOD5排放量需削减198 t/a,汉正下河街排污口BOD5排放量需削减617 t/a,其它排污口BOD5排放量在允许值范围以内;各排污口的CODCr排放量均在允许值范围以内;国棉三厂排污口NH3-N排放量需削减57 t/a,汉正下河街排污口NH3-N排放量需削减95 t/a,其它排污口NH3-N排放量在允许值范围以内。该方法充分考虑各污染源合理利用环境的自然降解能力,比简单要求每个污染源都达标排放更合理,对各污染源也更加公平,也容易被排污企业接受,具有一定的实用价值。