用于滤膜称重的饱和氯化镁溶液恒湿系统搭建与评估

目前中国大气颗粒物污染严重,许多颗粒物测量工作使用基于滤膜采样的重量分析法,滤膜称重过程的质量保障至关重要.本文搭建了一套具有恒湿能力的滤膜平衡称重箱(1.2 m×0.6 m×0.8 m)并自制流量控制系统用于平衡和称量滤膜.通过测试空白滤膜和负载大气颗粒物的滤膜在不同相对湿度下的质量变化确定了30%~40%的平衡相对湿度并选用饱和氯化镁溶液控制称重箱内的相对湿度.用20 L·min~(-1)的干燥气通过装有饱和氯化镁溶液的恒湿箱,再将平衡后的气体通入平衡称重箱使其相对湿度达到稳定,随后用5 L·min~(-1)的流量维持.通过一个月的测试表明,系统在称重箱外相对湿度变化较大时,仍可维持称重箱内相对湿度在30.1%~34.0%之间.使用该恒湿系统称量60张滤膜,恒湿3次后称量的偏差均值不超过±0.02mg.相比于其他恒湿系统,这套系统具有简单、稳定、易于维护和成本低的特点.     

郑州市地下水均衡场地中渗透仪潜水蒸发规律分析

根据郑州市地下水均衡场1991～1996年地中渗透仪实测资料．分析了潜水蒸发与气象因素、埋深、土壤岩性及降雨入渗的关系。研究表明;潜水埋深较小(不大于1．0m)时,潜水蒸发与水面蒸发在动态分布上显示出极大的相关性;潜水蒸发随埋深增大急剧减弱;毛细上升高度和渗透性结合得比较好的土壤潜水蒸发较大;在埋深较小(不大于1．0m)时．单次集中降雨入渗对潜水蒸发影响显著。     

上海市降尘自动监测系统研发与应用

大气降尘量是重要的环境指标之一,可以较客观地反映和评价城市局部地区扬尘污染水平,对评价城市区域环境空气质量、分析大气污染来源和变化具有重要意义。国内外大气降尘监测普遍采用传统的手工监测方法,手工法因时效性差、效率低、能耗大、质控难、误差大等原因已不适应现代环境管理的需求。随着科技与网络的发展,自动监测方法成为发展趋势。文章主要阐述了上海市降尘自动监测技术的研发过程及实际应用,介绍了自主研发的降尘自动监测仪的原理、关键技术和系统组成。通过粉尘舱内实验、降尘自动监测方法与手工重量法比对测试及为期一年的试点应用,分析了降尘自动监测方法的精密度、准确度、相对误差及适用性,并探讨了降尘自动监测的应用前景。     

城市家庭食物消费差异的实证研究——以郑州市为例

食物消费是人类最基本的消费行为。以中原地区典型城市郑州市为例,通过问卷调查和跟踪称重方法,获取了309户城市家庭的一手食物消费数据,定量分析了现阶段我国典型城市家庭食物消费的差异。研究表明：（1）郑州城市家庭人均食物消费总量为372.32 g/餐。其中,植物性食物的消费量约为动物性食物的3倍。（2）三个样本城区中,惠济区水产品和水果的人均消费量远低于金水区和二七区;收入水平较高的家庭,蔬菜、主食的人均消费量占人均食物消费总量的比例趋于减小,而水产品、奶类和水果的比例趋于增加;人口规模较小的家庭比规模较大的家庭人均食物消费量大。（3）通过与中国居民平衡膳食宝塔推荐的食物摄入量对比发现,郑州城市家庭主食类和蔬菜类消费量合理,畜禽肉和蛋类的消费量过高,粗杂粮、水果、奶类和大豆摄入不足。实证研究为进一步准确获取居民食物消费基础数据提供了参考,并为相关政策的制定提供了科学依据。     

森林生态系统恢复力评价——以江西省莲花县为例

生态系统恢复力是森林资源可持续发展的中心目标之一。在明确生态系统恢复力定义和尺度的基础上,分析了森林生态系统恢复力的影响因素,从生境条件和生态存储两方面遴选出26个指标,建立了森林生态系统恢复力评价指标体系,并以江西省莲花县为案例区,采用组合赋权法确定了指标权重,通过空间叠加计算了莲花县森林生态系统恢复力。结果表明:森林生态系统恢复力主要受内部存储的影响,其权重达到0.554。莲花县森林生态系统恢复力在0.103到0.464之间,平均值为0.268,恢复力达到或超过平均水平的森林面积为37 907 hm²,占森林总面积的49.2%,整体处于较低水平;分级结果表明仅48.16%的森林达到高或较高恢复力水平;在空间分布上,莲花县森林生态系统恢复力为南高北低,南部和中部的森林大多处于高或较高恢复力水平,北部地区大部分森林处于中等、较低或低恢复力水平。此外,恢复力高的森林沿乡镇边界线分布的特点非常明显。该研究结果可为森林资源管理提供重要科学依据。     

Applicability of high rate transpiration system for treatment of biologically treated distillery effluent

The biologically treated distillery effluent (BTDE) contains intense colour, high total dissolved solids (TDS), chemical oxygen demand (COD) and biochemical oxygen demand (BOD). These properties even after primary, secondary and tertiary treatments contain high concentrations of TDS, COD and BOD. The paper highlights the safe disposal and treatment of BTDE on land through High Rate Transpiration System (HRTS). HRTS is a zero discharge, low cost, high-tech method for improving the quality of BTDE for potential reuse. The experiments conducted at bench and pilot scale showed that HRTS having coconut husk as a bedding material could successfully treat the BTDE with a hydraulic load of 200 m³ ha⁻¹ day⁻¹ having BOD of 100 mg l⁻¹ and 500 m³ ha⁻¹ day⁻¹ having BOD of 500 mg l⁻¹ with average COD load of 0.686 and 2.88 ton ha⁻¹ day⁻¹ during the post and pre monsoon periods respectively. There was no significant increase in the organic carbon of the soil irrigated with BTDE. The concentrations of various pollutants analyzed in the leachate were within the prescribed limit for the drinking water sources. The colour removal was 99 to 100% and BOD and COD were possible to treat with optimum hydraulic loading of BTDE through HRTS planted with Dendrocalamus strictus.     

Relationship of surface changes to metal leaching from tungsten composite shot exposed to three different soil types

Physical changes that occur on the surface of fired shots due to firing and impact with soil may increase the dissolution of muniton metals. Increased metal dissolution could potentially increase metal transport and leaching, affecting metal concentrations in surface and groundwater. This research describes the relationship between the surface changes on fired tungsten-nickel-iron (94% W:2% Ni:4% Fe) composite shots and metals leaching from those shots. Tungsten composite shot was fired into, and aged in, three soil types (Silty Sand, Sandy Clay, and Silt) in mesoscale rainfall lysimeters to simulate live-fire conditions and subsequent interactions between the metals of the composite and soil. Leachate, runoff, and soil samples were collected from the lysimeters and analyzed for metal content. The shots were analyzed using scanning electron microscopy (SEM) to evaluate surface changes. SEM results indicated that a soil’s particle size distribution initially affected the amount of metal that was sheared from the surface of the fired W-composite shots. Shearing was greatest in soils with larger soil particles (sand and gravel); shearing was least in soils composed of small soil particles (fines). Increased metallic shearing from the shot’s surface was associated with increased W dissolution, compared to controls, following a simulated 1 year soil aging.     

Leachate formation and characteristics from gasification and grate incineration bottom ash under landfill conditions

Characteristics and formation of leachates from waste gasification and grate firing bottom ash were studied using continuous field measurements from 112 m³ lysimeters embedded into landfill body for three years. In addition, the total element concentrations of the fresh ash were analysed and laboratory batch tests were performed to study leachate composition. The three-year continuous flow measurement showed that about one fifth of the leachates were formed, when the flow rate was >200 l/d, covering <3.5% of the study time. After three years, the liquid/solid-ratio for the quenched grate ash was 1 (l/kg (d.m.)) and for the initially dry gasification ash 0.4 (l/kg (d.m.)). The low initial water and residual carbon content of the gasification ash kept the leachate pH at a high level (>13) major part of the study. In the grate ash leachate pH was lower (<8) due to the presence of organic carbon and biodegradation indicated by biological oxygen demand and redox potential measurements. In the gasification ash the high pH probably delayed leaching of major elements such as Ca, therefore, raising the need for a longer after-care period. The high pH also explains the higher leaching of As from the gasification ash compared to the grate ash both in the batch test and under landfill conditions.     

模糊数学模型在外排废水综合评价中的应用

引入模糊数学中隶属度、权重及模糊矩阵的概念,综合考虑各污染因子状况以确定外排废水的水质情况,更加合理地刻划其外排废水的污染程度,从中找出治理重点,有针对性地加强治理,改善环境。     

Simulation study on vertical transport of atrazine in soil column

A simulation experiment on vertical transport of herbicide atrazine (2-chloro-4-ethylamino-6-isopropylamino-s-triazine) in soil column was conducted using lysimeter system. The atrazine concentrations in leaching water and soil samples in column at 8 layers with 10 cm thick of each layer were detected by high-performance liquid chromatography. The results show total atrazine amount in leaching water increases nonlinearly with the leaching time and the herbicide application rate, and the atrazine concentrations in column soil decrease with the vertical depth after water leaching. The distribution of atrazine mass in the system after 154 days were that among the applied atrazine, 0.3 ％ is out through leaching water, 1％ is methanol extractable residues in soil, 46 ％ is methanol nonextractable residues in soil, and 52 ％ is other loss (including volatilization and degradation). The study indicates movement of atrazine in agriculture soil may not only have relation to the properties of herbicide, but also to the herbicide application history.