官地水电站竹子坝料场高边坡的稳定性分析及其影响因数研究

竹子坝料场是官地水电站混凝土浇筑骨料的重要来源之一。结合竹子坝料场的地形地质情况,以及料场开挖后形成的东、南、西三段人工边坡,运用刚体极限平衡的方法进行稳定性分析及其影响因数的研究。     

The Influence of a Coal-Fired Power Plant in Turkey on the Chemical Composition of Rain Water in a Certain Region

In this study, the chemical composition of the rainwater in Yatağan, which is a region surrounding a coal power plant was investigated from February to April 2002. Rainwater samples were obtained from Yatağan, located northwest of Muğla City in Turkey. pH values and concentrations of major ions (Ca²⁺, Na⁺, K⁺, , , ) in the rainwater samples were analyzed. The pH varied from 5.1 to 7.9 with an average of 6.7 which was in alkaline range considering 5.6 as the neutral pH of cloud water in equilibrium with atmospheric CO₂. In the total of 30 rain events, only three events were observed with water in the acidic range (<5.6), which occurred after continuous rains. The equivalent concentration of components followed the order: Ca²⁺ > > Na⁺ > > > K⁺ > H⁺. The anion and cation concentrations in the rainwater samples showed a high sulphate concentration (131 μEq/l), as well as high sodium (40 μEq/l) and calcium (298 μEq/l) concentrations. These values indicate that one probable source of the high sodium concentration is fly ash, after the coal burning process and the power plant can be effective on level concentrations in rainwater. In addition, the dust-rich local and surrounding limestone environment might have caused the high concentration of Ca²⁺ in rainwater of the Yatağan Basin. Due to a large contribution of these cations to the sulphate neutralization action, the rainwater of this region displays only a moderate acidity, which does not cause significant environmental impact.     

利用卫星遥感数据估算PM2.5浓度的应用研究进展

近年来,PM_(2.5)已成为中国大气污染的首要污染物,危害人体健康。为弥补地基监测站点在空间分布上的局限性,借助卫星遥感技术估算PM_(2.5)浓度已成为研究热点。文章总结了利用卫星估算PM_(2.5)浓度的各种研究方法,探讨了不同方法的优势和不足,指出不同方法对不同应用目的的选择性差异较大。提出,应针对不同应用目的选择相应的方法,从而取得满足各方面需求的研究成果,为未来PM_(2.5)浓度估算应用工作提供参考。     

北斗导航终端设备可靠性加速试验与快速评价技术研究

针对北斗导航终端设备开展传统可靠性试验时间长、成本高,难以实现在短期内完成高可靠性指标考核的现状,借鉴加速试验建模技术和相关标准的加速模型参数,进行北斗导航整机可靠性加速建模,设计加速试验剖面和方案,预先评估出北斗导航终端设备的加速因子,通过一组样品即可完成北斗导航的加速试验,实现对北斗导航终端设备高可靠性指标的快速评估。     

重大基坑坍塌事故虚拟仿真系统研究

为预防基坑坍塌事故发生、进行重大事故警示教育,以杭州地铁湘湖站北2基坑坍塌事故为素材,研究构建重大基坑坍塌事故虚拟仿真培训系统。对案例事故涉及的设计、施工、环境三大因素的技术问题进行总结,研究了事故链各致险因素及对推动事故发生所起作用,完成仿真系统平台设计和开发工作。系统应用多种制作技术创建工程场景模型,展示深基坑工程复杂的施工工序和空间关系,再现基坑坍塌事故发生发展过程和贴近实际的灾难场景。研究结果表明:仿真系统成果可丰富地下工程教学、施工现场安全教育和安全监察培训的内容和形式。     

复杂气井套管力学分析与可靠度评价

为建立考虑地层和套管参数随机性的套管可靠度评价理论方法,以便得到复杂井况下套管传统设计安全系数与可靠指标之间的关系,提出了非均匀地应力和内压联合作用下,沿套管最大外挤力方向管壁任意位置发生屈服失效时外壁等效均匀外挤力的计算方法;建立了套管抗挤和抗内压三轴强度计算公式以及有效内压计算方法;根据套管载荷和强度影响因素统计参数以及评价过程中参数测试标准值,利用蒙特卡洛法（MC）建立了完整的套管可靠度计算和评价方法;通过实例对传统安全系数与可靠指标的对应关系进行了研究。研究结果表明:指定条件下,套管安全系数与可靠指标之间存在对应关系;利用建立的方法编制计算程序可以为传统设计法中安全系数代表的安全程度进行量化;可靠度评价方法能够为安全系数的选取提供指导。     

Performance improvement of airfoils for wind blade with the groove

This study was a basic one to explore how much the aerodynamic characteristics of wind blade improve. The extent of improvement according to the shapes of groove placed on the surface of airfoil (NACA0015) was analyzed through computational analysis. A commercial computational fluid dynamics (CFD) code, the ANSYS Fluent 13, was used in this study. In this study, regarding with the positions and shapes of groove, the end of groove was placed at a certain distance (length, l) from both the front and back of separation starting point, the depth and the width were designated as h and d respectively. Analysis was conducted at the 7° angle of attack under the following conditions; the thickness (δ) of boundary layer to the depth (h) of groove ratio (h/δ) 0.6–1.0, the depth (h) of groove to the width (d) of groove ratio (h/d) 0.1–1.4, and the length (l) between the end of groove and separation point to the thickness (δ) of boundary layer ratio (l/δ) ?0.5–0.5. Among these conditions, the best improvement of lift to drag ratio, standing at 15.3%, was under h/δ = 1.0, h/d = 0.12, and l/δ = –0.5 (7° AOA, Re = 360k). In addition, throughout the range of angle of attack, 2–14°, lift to drag ratio improved by 0.8%, 5.1%, 3.2%, and 1.8% each when Reynolds numbers were 280k, 360k, 450k, and 530k. It is also confirmed that the shape of groove contributed to recovering velocity around airfoil wall and the lift to drag ratio improvements by groove were maintained at the given range of Reynolds number and around the angle of attack, 7°.     

The Relative Importance of Landscape Amenity and Health Impacts in the Wind Farm Debate in Australia

In recent years, Australia has experienced public debate around the growth in wind farms as part of government and community strategies to move from fossil fuels to renewable energy. Many of the arguments put forward by opponents and supporters are similar to those that have been evident in North America and Western Europe, including possible environmental impacts on wildlife, noise levels and, perhaps most prominently adverse changes in ‘landscape amenity’. A concern of increasing prominence is that of adverse human health impacts from proximity to operating turbines. Using analysis of submissions to public inquiries and a small number of detailed interviews, we consider the increased focus in Australia on the health impacts of wind farms. We note that health impacts, as elsewhere in the world, are often part of a suite of objections to wind farm developments but conclude that for some people near such developments, these are the main concern and not a cover or proxy for other concerns, such as changes in landscape amenity and aesthetics.     

Suitable error evaluation criteria selection in the wind energy assessment via the K-means clustering algorithm

In this paper, wind energy potential of four locations in Xinjiang region is assessed. The Weibull distribution as well as the Logistic and the Lognormal distributions are applied to describe the distributions of the wind speed at different heights. In determining the parameters in the Weibull distribution, four intelligent parameter optimization approaches including the differential evolutionary, the particle swarm optimization, and two other approaches derived from these two algorithms and combined advantages of these two approaches are employed. Then the optimal distribution is chosen through the Chi-square error (CSE), the Kolmogorov–Smirnov test error (KSE), and the root mean square error (RMSE) criteria. However, it is found that the variation range of some criteria is quite large, thus these criteria are analyzed and evaluated both from the anomalous values and by the K-means clustering method. Anomaly observation results have shown that the CSE is the first one should be considered to be eliminated from the consequent optimal distribution function selection. This idea is further confirmed by the K-means clustering algorithm, by which the CSE is clustered into a different group with KSE and RMSE. Therefore, only the reserved two error evaluation criteria are utilized to evaluate the wind power potential.     

Variability of pesticide residues in cauliflower units collected from a field trial and market places in Greece

To estimate the variability of pesticide residue levels present in cauliflower units, a total of 142 samples were collected from a field trial of a cooperative farmer, and 120 samples were collected from different market places in Thessaloniki, Greece. The collected samples were extracted using the quick, easy, cheap, effective, rugged, and safe (QuEChERS) extraction technique, and the residues were determined by liquid chromatography–tandem mass spectrometry. The developed method was validated by evaluating the accuracy, precision, linearity, limit of detection (LOD), and limit of quantification (LOQ). The average recoveries for all the analytes, derived from the data of control samples fortified at 0.01, 0.05, 0.1, and 0.2 mg/kg, ranged from 74 to 110% with a relative standard deviation of ≤8%. The correlation coefficient (R²) was ≥0.997 for all the analytes using matrix-matched calibration standards. The LOD values ranged from 0.001 to 0.003 mg/kg, and the LOQ was determined at 0.01 mg/kg for all the sought analytes. The matrix effect was found to be at a considerable level, especially for cypermethrin and deltamethrin, amounting to +90% and +145%, respectively. For the field samples, the unit-to-unit variability factors (VFs) calculated for cypermethrin and deltamethrin were 2.38 and 2.32, respectively, while the average VF for the market basket samples was 5.11. In the market basket samples, residues of cypermethrin, deltamethrin, chlorpyrifos, and indoxacarb were found at levels ≥LOQ and their respective VFs were 7.12, 5.67, 5.28, and 2.40.