红外光谱法测定粉尘中游离二氧化硅综述

全面地回顾了国内外红外光谱法测定粉尘中游离二氧化硅的研究成果。系统而重点地介绍了溴化钾压片法、粉尘滤膜样品重沉积和采样滤膜直接测定技术,分析了样品粒度、标准石英物质和矿物干扰物对测定结果的影响及干扰消除方法;还介绍了国外对红外光谱法与Ｘ－射线衍射法进行比较性研究的结果和动态,并得出结论。文章所列参考文献对本领域研究人员和基层检测人员具有很高的参考价值。     

A convective wind resource model for Solar Vortex power generation

ABSTRACT

Climate change has increased the need for clean, nonpolluting energy sources to decrease dependence on fossil fuels. Alternative energy sources, mainly solar and horizontal wind, have been the primary focus for producing clean energy. New technologies are being developed, such as the Solar Vortex (SoV), which was developed at the Georgia Institute of Technology, and relies on a vertical wind resource to generate power. The National Renewable Energy Lab (NREL) has resource models representing solar and horizontal wind resources across the 48 United States. This research developed a vertical wind resource model that is comparable in resolution to NREL’s solar and horizontal wind resource models and uses the model for estimating power output for the SoV. This model complements NREL’s existing resource models and supports the deployment of an additional clean energy generation technology. The model was applied to Mesa, Arizona to find feasible sites for a small-scale vertical wind farm.     

Short-term wind speed forecasting based on random forest model combining ensemble empirical mode decomposition and improved harmony search algorithm

ABSTRACT

Wind speed forecasting plays an important role in power grid dispatching management. This article proposes a short-term wind speed forecasting method based on random forest model combining ensemble empirical modal decomposition and improved harmony search algorithm. First, the initial wind speed data set is decomposed into several ensemble empirical mode functions by EEMD, then feature extraction of each sub-modal IMF is performed using fast Fourier transform to solve the cycle of each sub-modal IMF. Next, combining the high-performance parameter optimization ability of the improved harmony search algorithm, two optimal parameters of random forest model, number of decision trees, and number of split features are determined. Finally, the random forest model is used to forecast the processing results of each submodal IMF. The proposed model is applied to the simulation analysis of historical wind data of Chaoyang District, Liaoning Province from April 27, 2015 to May 22, 2015. To illustrate the suitability and superiority of the EEMD-RF-IHS model, three types of models are used for comparison: single models including ANN, SVM, RF; EMD combination models including EMD-ANN, EMD-SVM, EMD-RF; EEMD combination models including EEMD-ANN, EEMD-SVM, EEMD-RF. The analysis results of evaluation indicators show that the proposed model can effectively forecast short-term wind data with high stability and precision, providing a reference for forecasting application in other industry fields.     

Multi-objective-based optimal transmission switching and demand response for managing congestion in hybrid power systems

ABSTRACT

This paper proposes a novel congestion management (CM) approach by using the optimal transmission switching (OTS) and demand response (DR) for a system with conventional thermal generators and renewable energy sources (RESs). In this paper, wind and solar PV units are considered as the RESs. The stochastic behavior of wind and solar PV powers are modeled by using the appropriate probability density functions (PDFs). The proposed CM methodology simultaneously optimizes the generation dispatch, demand response, and also the network topology of the power system. The OTS identifies the branches that should be taken out of service by significantly reducing the operating cost of the system while respecting the system security. Here, the total operating cost minimization/social welfare maximization and system losses minimization are considered as the objectives to be optimized. The proposed CM problem is solved using the multi-objective Jaya algorithm and it is used to determine a set of Pareto-optimal solutions. The Jaya algorithm is simple and it does not have any algorithmic-specific parameters to be tuned. This aspect reduces the designer’s effort in tuning the parameters to arrive at the optimum objective function value. A fuzzy logic-based approach is used to identify the best compromise solution. The effectiveness of the proposed CM approach is examined on modified IEEE 30 and practical Indian 75 bus test systems. The obtained simulation results are analyzed and they show the effectiveness of the proposed approach.     

Investigation of sustainable energy alternatives for powering remote communities in northern Ontario

ABSTRACT

Remote communities in the North of Ontario survive in isolation as their proximity to the southern industrial sector of the province limits their accessibility to the major grid. The lack of grid connection has led to antiquated methods of power generation which pollute the environment and deplete the planet of its natural resources. Aside from the primary means of electricity generation being by diesel generators, generation infrastructure is deteriorating due to age and the stagnation of the power supply has led to communities facing load restrictions. These challenges may be resolved by introducing clean energy alternatives and providing a fuel blend option. The primary energy sources investigated in this research are solar, wind, and hydrogen. To assess the viability of these energy production methods in Northern communities, an exergy analysis is employed as it utilizes both the first and second law of thermodynamics to determine systems’ efficiency and performance in the surroundings. Local weather patterns were used to determine the viability of using wind turbines, solar panels and/or hydrogen fuel cells in a remote community. Through analysis of the resources available at the community, it was determined that the hydrogen fuel cell was best suited to provide clean energy to the community. Wind resulted in low efficiency in the range of 2–3% while solar efficiencies resulted in ranges of 18 – 19%, as the seasonal variations between the three years is not very great. Due to the higher operating efficiencies observed of the PV panels it would also be an attractive alternative to diesel generators however, the lack of consistent operation above 30% efficiency throughout the year, resulted in hydrogen fuel cells being a better alternative.     

The hybrid model of empirical wavelet transform and relevance vector regression for monthly wind speed prediction

ABSTRACT

In order to improve the prediction ability for the monthly wind speed of RVR, the hybrid model of empirical wavelet transform and relevance vector regression (EWT-RVR) is proposed for monthly wind speed prediction in this study. Compared with empirical mode decomposition (EMD), empirical wavelet transform (EWT) can obtain a more consistent decomposition and have a mathematical theory. In order to testify the superiority of EWT-RVR, several traditional RVR models are used to compare with the proposed EWT-RVR method under the situation of the same embedding dimensions. The experimental results show that the proposed EWT-RVR method has a better prediction ability for monthly wind speed than RVR. It can be concluded that the proposed EWT-RVR method for monthly wind speed is effective.     

乡镇工业企业发展与环境,资源协调问题初探

我国乡镇工业企业的发展与环境、资源的协调问题已经成为我国发展与环境、资源关系方面的大问题。实行工农相对分离,组建乡村工业区,是提高乡镇工业企业素质、效益,强化乡镇工业企业优化组合、规模经营的有效途径;是保护环境,实现资源有效利用的基础工作之一;是提高农业劳动生产率,实现农业规模经营的基础工作之一。     

高速公路交通事故分析及预防对策研究

利用济青高速公路 1998～ 1999年发生的 10 85起交通事故数据 ,在资料收集、处理和统计分析的基础上 ,对影响高速公路交通事故的人、车辆、道路环境、天气和交通量等主要因素进行了分析 ,并与国外的统计结果进行对比研究 ,预测出随着高速公路交通量的增长 ,事故率将会增加。此外 ,笔者针对影响高速公路事故因素提出了主动性、被动性预防对策 ,这些对策的实施将会减少高速公路事故的发生     

Study of Trace and Heavy Metals in Rural and Urban Aerosols of Uludağ and Bursa (Turkey)

The concentrations of heavy, trace elements and major ions measuredin the Uluda and Bursa aerosols were investigated to assess size distributions, spatial and temporal variability, sources and source regions affecting the composition of aerosols in Uluda and Bursa. A total of 81 samples were collected in two sites, one in Bursa city and another in the Uluda Mountain during two sampling campaigns. Daily samples were collected using a high volume sampler on Whatman 41 cellulose filters in Uluda, while three days interval samples were collected in Bursa using an automatic dichotomous sampler on PTFE Teflon filters. Samples were analysed for 15 trace and heavy metals (Al, Fe, Ba, Na, Mg, K, Mn, Ca, Cu), (V, Pb, Cd, Cr, Ni, Zn), and 4 major ions (SO₄ ^2-, NO₃ ^-, Cl^-), (NH₄ ⁺) using ICP-AES, GFAAS, HPLC and UV/VIS Spectrophotometer,respectively. In general, concentrations of the metals measured inUluda aerosols were lower than those in Bursa. The concentrations of crustal elements were higher in summer than winter, while anthropogenic elements had higher concentrations in winter than summer. Most of the mass of crustal elements was concentrated in the coarse mode while the mass of the heavy metals was concentrated in the fine mode. Factor analysis revealed four factors with sources including crustal, industrial and combustion. Back trajectory calculations were used to determine long range contributions. These calculations showed that contributions were mostly from European countries, former Soviet Union countries, Black Sea and North Africa.     

Application of Multiattribute Decision-Making Methods for the Determination of Relative Significance Factor of Impact Categories

A relative significance factor (f _i ) of an impact category is the external weight of the impact category. The objective of this study is to propose a systematic and easy-to-use method for the determination of f _i . Multiattribute decision-making (MADM) methods including the analytical hierarchy process (AHP), the rank-order centroid method, and the fuzzy method were evaluated for this purpose. The results and practical aspects of using the three methods are compared. Each method shows the same trend, with minor differences in the value of f _i . Thus, all three methods can be applied to the determination of f _i . The rank order centroid method reduces the number of pairwise comparisons by placing the alternatives in order, although it has inherent weakness over the fuzzy method in expressing the degree of vagueness associated with assigning weights to criteria and alternatives. The rank order centroid method is considered a practical method for the determination of f _i because it is easier and simpler to use compared to the AHP and the fuzzy method.