A non-destructive single plate method for measurement of thermal resistance of polymer sheets and fabrics

Measurement of thermal resistance of polymer sheets and fibrous layers is important in various applications including those within the engineering, ergonomics, clothing design and personal protective equipment fields. Standard methods for measurement of thermal resistance of plain materials are generally time consuming, expensive and often require the sample to be cut. Moreover, the temperature difference between the surfaces of both plates surrounding the sample must be known, as well as the sample thickness. This article describes a new measuring device named the Thermoscope. The Thermoscope is not limited by the aforementioned requirements and is able to evaluate the thermal resistance of polymer sheets and textiles by touching the sample on one surface alone. Simultaneously, the other surface is kept in thermal contact with the supporting base. The accuracy of this device was compared with the Alambeta thermal insulation tester. Effects of various base materials on measurement precision were also studied.     

生物技术在欧美遇到的抵制及教训

回顾了欧美公众对生物技术的种种疑虑和生物技术的研究开发所遇到的阻力，分析了产生这种现象的原因，并提出了我国应从中吸取的教训。     

响水风电基础地震动参数选取及抗震性能分析

响水风电场位于江苏省响水沿海滩涂地区,是国内目前单体较大的风电项目。本风电场是Ⅳ类场地条件对抗震不利,因此有必要对基础抗震性能进行验算。首先选取不同地震动参数进行了对比计算,计算表明根据风电场场区地形地貌、区域地质条件确定的地震动参数,考虑土层特性后,地震作用放大较多。然后针对在多遇地震和基本烈度地震两种情况下,综合考虑波浪力、风荷载的联合作用,对风电基础进行抗震验算,计算表明多遇地震烈度时,可满足现行建筑结构抗震规范的要求。基本烈度地震时,结构的应力、内力及其墩台处位移均满足抗震要求,但泥面处位移超过限制要求,泥面位移控制是抗震设计的主要目标。     

Clogging of Filtering Material Systems Used for Disposable Respirators

The article shows the problem of clogging in connection with the parameters of filtering materials used in respiratory protective equipment. The results of investigations of airflow resistance changes during the depositing of dust inside the filtering material are presented. The configuration of layers differing in mass per unit area and the number of layers, were taken into consideration. For each configuration, the clogging abilities and the changes of airflow resistance as a reason of loading with dust were assessed. The analysis of tested materials confirms the hypothesis that there is an important coincidence between the properties of the material used in filtering equipment and the clogging coefficient. The results show that the filter should have a layered structure and that the outer layer should be made of a nonwoven of relatively high surface density.     

A Contribution to the Study of the Antidust Respirators’ Real Performance

In most industrial enterprises, hazardous factors are present in quantities exceeding permissible levels. Such a situation requires using antidust respiratory protection. It has been suggested, however, that filters for respirators are not assessed properly and that lab results might not be related to real filtering efficiency in industry. This article contains test results of some commercially available filtering half-masks, including the effect of loading with real dust, high humidity, high temperature, and a combination of loading with dust and high humidity on the half-masks’ performance. The results show that the effect of these factors is considerable and that a combination of loading with silica dust and exposing to high humidity can cause a complete loss of performance.     

湿度显示卡在防水试验中的应用

文章介绍了采用湿度显示卡在产品防水试验中的应用。结合IP等级中的防水试验,通过分析产品的防水结构与内部主要安全部件,科学使用与排布湿度显示卡,准确判定进水路径,以此达到对防水试验结果的准确判定与分析。     

风力发电设备在我国不同气候条件下环境适应性分析

风力发电设备的环境适应性问题已经引起风电企业的重视,本文介绍了温度、湿度、盐雾、低气压、台风、雷电等环境因素对风力发电设备性能的影响,总结了我国不同地区和不同季节应该关注不同的环境因素,提出了风力发电设备在不同环境因素作用下的防护措施。     

常用过滤材料对微细颗粒过滤性能的研究

通过实验手段对几种过滤材料的阻力、过滤效率进行了研究。结果表明,目前常用的过滤材料对超细颗粒物的除尘效果并不理想,尚有很大的提升空间。     

渤海西部局地大雾变化趋势及成因分析

利用2002-2012年秦皇岛地区4个气象站大雾监测及Micaps 3.0常规资料,对比分析卢龙与沿海站大雾的时空尺度分布特征,对大雾持续时间、日数进行跨月、跨年统计,从中筛选出189个样本个例进行变化趋势分析。对典型17个过程个例按能见度大小进行3级设定,对应其同步天气背景,分析大雾偏多的成因。     

地面风场风速测量标准装置需求与设计

针对地面风场中风速测量仪器计量测试的需求,提出了风速测量标准装置的组成及性能指标设计要求,详细分析了风速测量标准装置各个重要部件的设计关键技术,结果表明该设计科学合理。