A novel technology for quick acclimation of an anaerobic microbial consortia used for biodegrading teraphthalic acid (TA)

ＩｎｔｒｏｄｕｃｔｉｏｎＴｅｒａｐｈｔｈａｌｉｃａｃｉｄ (ＴＡ)ｉｓｏｎｅｏｆｔｈｅｐｅｔｒｏｃｈｅｍｉｃａｌｓｗｉｄｅｌｙｕｓｅｄｉｎｔｈｅｓｙｎｔｈｅｓｉｓｏｆｐｏｌｙｅｓｔｅｒｆｉｂｅｒ,ｖｉｄｅｏｆｉｌｍｓａｎｄｏｔｈｅｒａｐｐｌｉｃａｔｉｏｎｓ .Ｓｉｎｃｅｂｉｓ (2 ｅｔｈｙｌｈｅｘｙｌ)ｐｈｔｈａｌａｔｅ ,ｄｉｅｔｈｙｌｐｈｔｈａｌａｔｅａｎｄｄｉｍｅｔｈｙｌｐｈｔｈａｌａｔｅｈａｖｅｂｅｅｎｃｌａｓｓｉｆｉｅｄａｓｐｒｉｏｒｉｔｙｈａｚａｒｄｏｕｓｃｏｍｐｏｕｎｄｓｂｙＥＰＡｏｆｔｈｅ…     

大直径TA2卷焊坯制备工艺

此文介绍尺寸为φ1547×L900×δ30的大直径TA2卷焊坯的制备工艺。主要包括卷焊坯设计、展开下料的计算、卷圆工艺、焊接工艺等,可供同类材质圆筒件卷圆时参考。     

TA15钛合金与铝合金和结构钢接触腐蚀大气暴露试验研究

讨论了TA15钛合金与铝合金和结构钢接触后,在海南万宁大气试验站大气暴露的试验结果。3年的大气暴露试验显示,在海洋性大气环境下,2B06铝合金、16CrSiN i钢和30CrMnSiA钢无论与TA15钛合金接触与否,腐蚀都很严重,力学性能明显下降;对2B06铝合金进行阳极氧化,对16CrSiN i钢和30CrMnSiA钢进行氯化铵镀镉,可在一定程度上减缓腐蚀,但经过一定时间大气暴露,无论与TA15钛合金接触与否,都产生了严重腐蚀,力学性能明显下降;对2B06铝合金进行阳极氧化,对16CrSiN i钢和30CrMnSiA钢进行氯化铵镀镉,再喷涂1号航空底漆进行防护,可有效防止接触腐蚀。     

Democracy at its Best? The Consensus Conference in a Cross-national Perspective

Over recent decades, public participation in technology assessment has spread internationally as an attempt to overcome or prevent societal conflicts over controversial technologies. One outcome of this new surge in public consultation initiatives has been the increased use of participatory consensus conferences in a number of countries. Existing evaluations of consensus conferences tend to focus on the modes of organization, as well as the outcomes, both procedural and substantial, of the conferences they examine. Such evaluations seem to rest on the assumption that this type of procedure has universally agreed goals and meanings, and that therefore consensus conferences can readily be interpreted and applied across national boundaries. This article challenges this approach to consensus conferences. The core of the article is a study of national differences in ideas about what constitutes legitimate goals for participatory arrangements. The study looks at three consensus conferences on GMOs, which took place in France, Norway, and Denmark. Drawing on this study, the article discusses the ways in which interpretations of the concept of participation; the value attributed to lay knowledge vs. technical expertise; as well as ideas about the role of the layperson, are all questions that prompt entirely different answers from country to country. Further, the article analyses these national differences within a theoretical framework of notions of democratic legitimacy.     

北美自由贸易区和欧盟的环境政策：趋向,启示与对策

以北美自由贸易区和欧盟为代表的区域性经济集团已在经济利益与环境保护挂钩的制度性安排方面取得诸多进展，它们不同程度地在机构设置、协定条款、资金安排等方面强化了环境要求，并在国际环境公约的执行上表现出积极、灵活的特点。这一切都将为未来多边经济体系中环境问题的协商和解决开辟了新的途径， 也为我国在实施可持续发展过程中的环境制度化建设提供可鉴之处。     

兼氧、好氧污泥对对苯二甲酸的生物吸附及降解

研究了连续试验方法培养的未驯化兼氧、好氧污泥对TA的吸附、解吸规律。结果表明,TA在活性污泥上的吸附、解吸规律符合Freudlich等温方程,该方程能较好的预测好氧反应器污泥对TA的吸附量;活性污泥的Freudlich吸附常数和解吸常数不同,表明污泥的生物吸附是一部分不可逆过程;好氧污泥对TA的吸附量大于兼氧污泥。连续试验过程中,反应器内活性污泥对TA的去除机制主要是生物降解作用,而不是生物吸附作用。     

Assessing the bioavailability of phenanthrene to soil microorganisms using the Tenax extraction method

The Tenax TA extraction technique followed by gas chromatography mass spectrometry (GC-MS) determinations was used to assess the actually bioavailable fraction of phenanthrene (ABF-Phe) in three different soils freshly contaminated with this compound at levels of 10, 100, and 1,000 mg kg⁻¹. The results were related to the ecotoxic effect of phenanthrene on soil nitrifying bacteria. Nitrification potential measurements were applied as an ecotoxicity end point. A strong positive linear relationship (r ² = 0.95) was obtained between the content of the actually bioavailable phenanthrene fraction and the inhibition of nitrifying bacteria activity.     

对苯二甲酸臭氧化降解的动力学及机制研究

研究了臭氧化对苯二甲酸(TA)的降解效率,并对该过程的动力学特性和降解机制进行了探讨.结果表明,TA与臭氧的 反应速率常数k_o3-TA为（0.047±0.001）L·（mol·s）^-1,与羟基自由基的k_OH-TA为2.28╳10⁹L·（mol·s）^-1以上结果与TA臭氧化降解的表观反应速率常数相一致.采用高效液相色谱(HPLC)和离子色谱(IC)分析了TA降解过程的中间产物,主要包括苯甲酸、酒石酸、甲酸和草酸,在此基础上提出了臭氧化TA的可能降解历程.     

用高浓度对苯二甲酸溶液产电的微生物燃料电池

以高浓度对苯二甲酸（TA）溶液为底物,研究微生物燃料电池的产电效果.以厌氧活性污泥作为接种体,经过210 h驯化,开路电压达到0.54 V,证明了TA可以作为微生物燃料电池的底物进行产电.深入研究了不同pH值和底物浓度对产电的影响,实验结果表明,当体系pH为8.0时,负载两端（R=1 000 Ω）电压最大,底物浓度越高,负载两端电压越大,并逐渐趋近于一个最大值,通过Monod方程回归得到该微生物燃料电池体系输出电压的最大值U_max为0.5 V,K_s值为785.2 mg/L.当底物浓度（以COD计）为4 000 mg/L时,最大输出功率密度为96.3 mW/m²,库仑效率为2.66%,COD去除率为80.3%.     

钛金属材料干摩擦磨损特性研究

目的研究钛金属材料干摩擦磨损失效机制。方法选用TA2工业纯钛和TC4钛合金材料,采用CETR UMT-3多功能摩擦磨损测试仪进行往复摩擦磨损试验,采集摩擦系数曲线,计算摩擦系数均值,从动态和静态分析钛金属材料的摩擦特性。采用Micromet-6030型自动显微硬度计测量样品材料表面硬度值,通过表面硬度分析耐磨损性能。采用Nova Nano SEM 650场发射扫描电镜并配置能谱仪对磨损表面和磨屑进行微观形貌观察和元素成分计量分析,从微观角度分析钛金属材料的磨损机理。采用Olympus Lext OLS3000-R型激光共聚焦显微镜测量磨损体积和轮廓,并观察磨损表面的三维形貌。结果频率对钛金属材料的摩擦系数和耐磨损性能影响较大,随着频率的加快,摩擦系数增大,数据跃变幅度增大,磨损体积随之增大。载荷对摩擦系数影响相对较小,随着载荷增大,在摩擦初期,摩擦系数有下降交汇趋势;摩擦后期,摩擦系数才明显上升,载荷与磨损体积之间基本呈线性增长关系。钛金属材料的磨痕呈现为"擦后型,随着载荷的增大和频率的加快,磨损体积轮廓呈现出加深变宽的趋势。TC4的表面硬度约为359.2 HV,TA2的表面硬度约为247.8 HV,前者比后者高出约111.4 HV。在相同试验条件下进行干摩擦磨损试验,TA2的磨损体积约为TC4的2.5倍,TA2的耐磨损性能相对较差。TA2的磨屑为细小的颗粒状磨屑,磨损表面存在严重的剥层脱落特征;TC4的磨屑粒径大小不一,在低频低载状态下,磨损表面有犁沟痕迹,不存在明显的剥落坑。随着载荷和频率的增大,摩擦表面层出现裂纹和碎化剥落现象。结论 TA2的磨损机制主要是剥层磨损和磨粒磨损。在低频低载状态下,TC4的磨损机制主要为磨粒磨损和氧化磨损,随着载荷和频率的升高,在瞬时闪现温度和载荷的作用下,其磨损机制主要为粘着磨损和剥层磨损。