临沂市区主要大气污染物的污染特征及其对居民健康的影响

大气污染是全球性的公共环境健康问题.本研究基于临沂市区2015年6种大气污染物（PM_2.5、PM₁₀、SO₂、NO₂、CO、O₃）的逐日监测数据,分析了污染物的污染特征及其与气象因子的相关性,通过构建广义相加模型,模拟分析了单个污染物与居民呼吸、循环系统疾病门诊人次的暴露-反应关系.结果表明,PM_2.5和PM₁₀是临沂市区首要大气污染物,NO₂和SO₂次之,O₃和CO浓度较低;除O₃外,其它5种污染物之间呈显著正相关,与风速、温度、相对湿度3个气象因子呈负相关,浓度水平冬季高、夏季低;O₃与温度呈显著正相关.对于呼吸系统疾病,单个污染物每增加10 μg·m^-3（CO每增加0.1 mg·m^-3）的最大效应情况是：PM₁₀、SO₂、NO₂、CO均在当天（lag0）使得门诊人次分别增加0.36%、1.77%、1.29%、0.69%,PM_2.5和O₃分别在累积滞后6 d（lag05）和单日滞后3 d（lag3）使得门诊人次分别增加0.6%和1.07%;对于循环系统疾病,单个污染物每增加10 μg·m^-3（CO每增加0.1 mg·m^-3）的最大效应是：PM_2.5、PM₁₀均在累积滞后5 d（lag04）使得门诊人次分别增加0.72%、0.80%,SO₂、NO₂均在累积滞后6 d使得门诊人次分别增加3.55%、3.54%,CO和O₃则分别在当天和单日滞后3 d使得门诊人次分别增加0.77%、1.39%.对于呼吸、循环系统疾病,PM_2.5、PM₁₀、CO、O₃对男性的影响均大于女性,SO₂则反之;NO₂对男性呼吸系统和女性循环系统影响较大.大气污染物对少年（7~17岁）呼吸系统和对中年（41~65岁）循环系统影响较大.临沂市区6种大气污染物存在不同程度的污染,对居民呼吸、循环系统疾病均有不同程度的影响,且存在性别和年龄的差异.     

中国菌糠露天焚烧污染物排放时空分布特征

基于我国2000~2017年食用菌年产量数据,采用排放因子法估算了菌糠露天焚烧的污染物排放量,利用Mann-Kendall法和聚类分析法分析了排放量的时空分布特征,使用回归分析法预测了污染物的排放趋势.结果表明：（1）2000~2017年全国菌糠露天焚烧污染物排放量持续上升,PM_2.5、CO₂、CO、CH₄、NMVOCs、PAHs、NO_x、SO₂累积排放量分别为1.40×10⁶,3.48×10⁸,1.99×10⁷,8.43×10⁵,2.08×10⁶,3.00×10⁴,6.34×10⁵,8.29×10⁴t;（2）污染物排放量较高的省区包括山东、黑龙江、浙江、湖南、江苏、福建和河南,排放量较低的省区包括贵州、宁夏、天津、北京、新疆、重庆、甘肃;（3）预计2021年菌糠焚烧污染物总排放量高达4.25×10⁷t,其对生物质焚烧污染物总排放量的贡献率约为19.82%.我国菌糠露天焚烧污染物排放规模较大,应予以重点关注.     

Effect of struvite and organic acids on immobilization of copper and zinc in contaminated bio-retention filter media

Few studies have been carried out to connect nutrient recovery as struvite from wastewater and sustainable utilization of the recovered struvite for copper and zinc immobilization in contaminated soil. This study revealed the effect of struvite on Cu and Zn immobilization in contaminated bio-retention soil in the presence of commonly exuded plant organic acids. The research hypothesis was that the presence of both struvite and organic acids may influence the immobilization of Cu and Zn in soil. The outcome of this research confirmed that more than 99% of Cu and Zn was immobilized in bio-retention filter media by struvite application. Water-soluble Cu and Zn concentrations of struvite treated soil were less than 1.83 and 0.86 mg/kg respectively, and these concentrations were significantly lower compared to the total Cu and Zn content of 747.05 mg/kg in the contaminated soil. Application of struvite to Cu- and Zn-contaminated soil resulted in formation of compounds similar to zinc phosphate tetrahydrate (Zn₃(PO₄)₂?4H₂O) and amorphous Cu and Zn phases. Struvite was effective in heavy metal remediation in acidic soil regardless of the presence of Ca impurities in struvite and the presence of plant organic acids in soil. Overall, this study revealed that struvite recovered from wastewater treatment plants has potential for use as an amendment for heavy metal remediation in contaminated bio-retention soil.     

Distribution of airborne particles from multi-emission source

The purpose of this work was to study the distribution of airborne particles in the surroundings of an iron and steel factory in southern Finland. Several sources of particulate emissions are lying side by side, causing heavy dust loading to the environment. This complicated multi-pollutant situation was studied mainly by SEM/EDX methodology.Particles accumulated on Scots pine bark were identified andquantitatively measured according to their element content,size and shape. As a result, distribution maps of particulateelements were drawn and the amount of different particle typesalong the study lines was plotted. Particulate emissions fromthe industrial or energy production processes were not themain dust source. Most emissions were produced from theclinker crusher. Numerous stockpiles of the industrial wastesand raw materials also gave rise to particulate emissions as aresult of wind erosion. It was concluded that SEM/EDXmethodology is a useful tool for studying the distribution ofparticulate pollutants.     

环境样品中痕量锰的催化动力学测定法

对环境样品中痕量锰的催化动力学测定方法进行简要评述，引述文献１６篇。     

The effect of catch crops on sulphate leaching and availability of S in the succeeding crop on sandy loam soil in Denmark

Sulphate leaching losses may reduce the long-term possibility of maintaining the S supply of crops in low input farming systems. The ability of catch crops (Italian ryegrass (Lolium multiflorum Lam), winter rape (Brassica napus L.) and fodder radish (Raphanus sativus L.)) to reduce soil sulphate concentrations in autumn and make it available to a succeeding crop was investigated in 1996–1998 on sandy loam soil in Denmark. All catch crops reduced soil sulphate concentrations in the autumn compared to bare soil. Especially, the cruciferous catch crops had the ability to deplete efficiently soil sulphate levels and thus, reduce the sulphate leaching potential. The S uptake in aboveground catch crop was 8, 22 and 36 kg S per ha for ryegrass, winter rape and fodder radish, respectively. In the following spring, sulphate levels of the autumn bare soil were low in the top 0.5 m and a peak of sulphate was found at 0.75–1 m depth. In contrast, where a fodder radish catch crop had been grown, high sulphate levels were present in the top 0.5 m, but only small amounts of sulphate were found at 0.5–1.5 m depth. In spring barley (Hordeum vulgare L.), that followed catch crops, S concentrations at heading and maturity revealed that the availability of soil S increased following winter rape and fodder radish, whereas there were indications that following ryegrass, the S availability was reduced compared to bare soil. This initial study showed that catch crops have a high potential for reducing sulphate leaching and may be used to synchronise S availability with plant demand in a crop rotation.     

猪场粪便微生物处理技术研究

猪场粪便是重要污染源，但又是一类尚未充分利用的资源。采用生态工程与资源化综合技术处理猪场粪便，固态粪经堆肥发酵后转化成优质有机肥，粪水经厌氧产沼、光合细菌液肥化、水生植物氧化塘多级处理和资源化利用，出水可达排放标准，为猪场粪便的处置提供了一种可供选用的技术。     

高浓度废水预处理

从分析冲击炼油污水处理的原因出发，阐述了高浓度废水预处理的重要性；重点介绍了三种好氧生物法处理技术；其中ＳＢＲ法由于工程技术日趋成熟，可优先推广应用     

A/O和A2/O法除磷脱氮工艺影响因素及除磷动力学的研究

重点介绍A/O除磷工艺和A~2/O除磷脱氮工艺,以及影响除磷脱氮工艺因素和除磷动力学的研究。工艺研究采用了动态与静态实验方法,采用色质联机研究了有毒有机物的降解情况。试验结果表明,A/O、A~2/O工艺的BOD_5去除率近于二级污水处理厂,A~2/O法TP去除率近于三级污水处理厂,且去除难降解有毒有机物的效率高于传统的活性污泥法。动力学公式的修正使之更适于低碳源的情况。八种影响因素的研究为工艺的设计与运行提供了依据。     

预处理方法对供应态LD钢超塑性压缩性能的影响

研究了国产新型冷作模具钢LD钢(7Cr7Mo3V2Si)经球化退火与循环退火后的超塑性压缩的力学特性.试验结果表明,经循环退火后的LD钢,其超塑性压缩性能优于球化退火,而且其最佳超塑性压缩的工艺参数也存在差异.