全文获取类型
收费全文 | 53篇 |
免费 | 7篇 |
国内免费 | 33篇 |
专业分类
安全科学 | 4篇 |
废物处理 | 18篇 |
环保管理 | 3篇 |
综合类 | 43篇 |
基础理论 | 5篇 |
污染及防治 | 17篇 |
评价与监测 | 3篇 |
出版年
2023年 | 1篇 |
2019年 | 2篇 |
2018年 | 2篇 |
2017年 | 2篇 |
2016年 | 3篇 |
2015年 | 4篇 |
2014年 | 7篇 |
2013年 | 11篇 |
2012年 | 9篇 |
2011年 | 13篇 |
2010年 | 2篇 |
2009年 | 4篇 |
2008年 | 4篇 |
2007年 | 3篇 |
2006年 | 7篇 |
2005年 | 5篇 |
2004年 | 2篇 |
2003年 | 7篇 |
2002年 | 1篇 |
1998年 | 1篇 |
1997年 | 1篇 |
1995年 | 1篇 |
1994年 | 1篇 |
排序方式: 共有93条查询结果,搜索用时 15 毫秒
1.
2.
Removal of noxious dyes is gaining public and technological attention. Herein grafting polymerization was employed to produce a novel adsorbent using acrylic acid and carboxymethyl cellulose for dye removal. Scanning electron microscopy and Fourier-transform infrared spectroscopy verified the adsorbent formed under optimized reaction conditions. The removal ratio of adsorbent to Methyl Orange, Disperse Blue 2BLN and malachite green chloride reached to 84.2%, 79.6% and 99.9%, respectively. The greater agreement between the calculated and experimental results suggested that pseudo second-order kinetic model better represents the kinetic adsorption data. Equilibrium adsorptions of dyes were better explained by the Temkin isotherm. The results implied that this new cellulose-based absorbent had the universaiity for removal of dyes through the chemical adsorption mechanism. 相似文献
3.
超临界水氧化处理高浓度丙烯酸废水 总被引:3,自引:0,他引:3
采用超临界水氧化(SCWO)技术在连续蒸发壁式反应器内处理高浓度丙烯酸废水。实验结果表明:SCWO能有效地处理丙烯酸废水,废水COD和TOC去除率分别达到99%左右,且反应时间短;反应温度、反应压力和氧化剂加入量的增加有利于COD和TOC去除率的提高。实验得出的废水处理最佳工艺条件:反应温度693K、反应压力24~26MPa、氧化剂加入量1.0~1.5倍。对反应器出口试样进行色谱-质谱联用分析结果表明,小分子醇、醚类以及CO2和CO是主要的液相产物和气相产物。针对腐蚀和盐沉积问题,提出了预防措施。 相似文献
4.
将臭氧分别与超声波、H2O2、紫外光等联用,深度处理干法腈纶生产厂生化池出水,对各种联用技术的处理效果进行了研究。实验结果表明:在进水流量2 L/min、反应时间30 min、臭氧加入量3.5 g/(L?h)的条件下,当超声功率为300 W时,臭氧-超声联用技术的COD去除率为30.0%;当H2O2加入量为0.4 mL/L时,臭氧-H2O2联用技术的COD去除率为50.7%;当紫外灯功率为40 W时,臭氧-紫外光联用技术的COD去除率为49.9%;在各种联用技术中,臭氧-H2O2联用技术的运行成本最低(为7.5 元/t),且处理后出水COD为143 mg/L,达到《<污水综合排放标准>(GB8978—1996)中石化工业COD标准值修改单》中的一级排放标准。综合考虑,臭氧-H2O2联用技术是深度处理干法腈纶废水的最优工艺。 相似文献
5.
采用Fenton氧化-序批式膜生物反应器(SBMBR)组合工艺处理干法腈纶废水。结果表明,在废水初始pH值为3.0,H2O2投加量为90.0 mmol/L,Fe2+投加量为20.0 mmol/L,反应时间为2.0 h的条件下,Fenton氧化预处理对腈纶生产废水的COD去除率达到47.0%以上,COD由1 091 mg/L降至560 mg/L,废水的BOD5/COD由0.32升至0.69,废水的可生化性得到显著提高。Fenton处理出水与丙烯腈废水等比例混合后,采用SBMBR进行生化处理,在水力停留时间为24 h,90 min缺氧/150 min好氧交替运行的条件下,COD、NH4+-N和TN的平均去除率分别为71.7%、97.2%和47.4%,碳源不足是限制TN去除效果的主要影响因素。在无外加碳源的条件下,组合工艺处理后出水COD和NH4+-N浓度分别为117 mg/L和1.7 mg/L,出水水质可以稳定达到国家一级排放标准(GB8978-1996)。 相似文献
6.
针对腈纶废水生化单元出水,对比研究了Al2(SO4)3和Fe2(SO4)3在不同絮凝剂投量和p H时的混凝处理效果,并利用紫外-可见分光光度法(UV-Vis)、三维荧光光谱(EEM)、凝胶渗透色谱(HPSEC)等对混凝特性进行了初步探讨。研究显示,2种混凝剂在投量为63.5 mg/L时可获得30%以上的COD去除率,且最佳p H为中性附近。当投量小于32 mg/L时,Al2(SO4)3较Fe2(SO4)3具有更高的COD去除率,进一步增大混凝剂的投量很难提高Al2(SO4)3对COD的去除率,而Fe2(SO4)3则在有限范围内能持续提高COD去除率。EEM光谱分析显示,与Al2(SO4)3相比,Fe2(SO4)3对有机物具有更广的处理范围和更好的去除效果。HPSEC分析表明,Fe2(SO4)3相对于Al2(SO4)3在去除重均分子量为2 776、1 856和1 325 Da的有机物组分方面具有优势。铁盐或铝盐混凝是深度净化腈纶废水生化单元出水的可行方案之一。 相似文献
7.
8.
Karine Vallee-Rehel Valérie Langlois Philippe Guerin 《Journal of Polymers and the Environment》1998,6(4):175-186
Specific polymeric material applications as bioactive molecules delivery systems involve a strictly controlled degradation of polymer matrixes. One possibility to obtain a zero-order kinetic for small molecules release consists in a simple hydrolysis of ester groups contained in the macromolecular structure. The chemical degradation can lead to the continuous surface erosion of the formulated resins without loss of their mechanical properties and to a permanent activity of the delivery systems. Hydrolysis is a very well-known reaction in the case of organic molecules containing ester groups. The mechanism seems to be more complicated when ester groups are located in macromolecular structures. With the aim of antifouling applications, acrylic acid polymers bearing lateral ester groups of different chemical structures (hydrophilic, hydrophobic, hydrolyzable) have been prepared, characterized, and immersed in water, at pH 8, and their hydrolysis has been studied. Experimental data display two parameters, at least, which must be taken into account: the reactivity of the ester groups toward hydrolysis and the hydrophilic/hydrophobic balance of the polymer. The susceptibility of the acrylic polymers to hydrolysis has been compared to the erosion characteristics of the corresponding films. The results confirm that hydrolysis is necessary to obtain a regular degradation of the films without loss of mechanical properties. A relationship has been observed between the characteristics of hydrolysis and erosion for each studied polymer. 相似文献
9.
丙烯腈装置火灾爆炸危险指数评价 总被引:2,自引:0,他引:2
张伟远 《安全.健康和环境》2003,3(5):32-34
运用美国道化学公司的火灾、爆炸危险指数评价方法(第七版),对丙烯腈装置的火灾爆炸危险性进行定量计算和评价,为装置的安全管理提供依据。 相似文献
10.