Adsorption selectivity of salicylic acid and 5-sulfosalicylic acid onto hypercrosslinked polymeric adsorbents

Both bottle-point and column-feeding experiments involving different solutes and sorbents were carried out to investigate the adsorption selectivity and separation performance of salicylic acid and 5-sulfosalicylic acid. Their adsorption isotherms onto such hypercrosslinked polymeric adsorbents as NDA-100 and NDA-99 could be well described by the Freundlich equations whose characteristics describe extrathermic and favorable adsorption processes. The adsorption towards NDA-100 mainly depended on the π-π interaction, while that towards NDA-99 was extremely influenced by the static-electric interaction. Additionally, the adsorptive capacity of salicylic acid on NDA-99 decreased while it increased on NDA-100 with the presence of 5-sulfosalicylic acid in the adsorptive environment as the competitive component. Comparatively, the adsorption capacity of 5-sulfosalicylic acid decreased on both resins with salicylic acid as the competitive component. In fact, the difference in the interaction between adsorbent and adsorbate resulted in the straight antagonism on the effective adsorption sites on the adsorbent. In conclusion, the adsorption selectivity of salicylic acid onto NDA-100 was obviously larger than that onto NDA-99 with the existence of 5-sulfosalicylic acid in the adsorptive environment. A satisfactory separation and recovery of tested solutes in aqueous phase could be foreseeably achieved by the sequencing adsorption technique involving NDA-100 as well as NDA-99. Translated from Environmental Pollution & Control, 2005, 27(8): 570–574 [译自: 环境污染与防治]     

特种胶塑复合管抗张强度计算

通过对特种胶塑复合管的抗张强度计算和生产实践，证明了矿用充填管路采用胶塑复合管是可行的。为矿用充填管以胶塑复合管替代铁管提供了依据。     

Enzyme-Retted Flax Fiber and Recycled Polyethylene Composites

Municipal solid wastes generated each year contain potentially useful and recyclable materials for composites. Simultaneously, interest is high for the use of natural fibers, such as flax (Linum usitatissimum L.), in composites thus providing cost and environmental benefits. To investigate the utility of these materials, composites containing flax fibers with recycled high density polyethylene (HDPE) were created and compared with similar products made with wood pulp, glass, and carbon fibers. Flax was either enzyme- or dew-retted to observe composite property differences between diverse levels of enzyme formulations and retting techniques. Coupling agents would strengthen binding between fibers and HDPE but in this study fibers were not modified in anyway to observe mechanical property differences between natural fiber composites. Composites with flax fibers from various retting methods, i.e., dew- vs. enzyme-retting, behaved differently; dew-retted fiber composites resulted in both lower strength and percent elongation. The lowest level of enzyme-retting and the most economical process produces composites that do not appear to differ from the highest level of enzyme-retting. Flax fibers improved the modulus of elasticity over wood pulp and HDPE alone and were less dense than glass or carbon fiber composites. Likely, differences in surface properties of the various flax fibers, while poorly defined and requiring further research, caused various interactions with the resin that influenced composite properties.     

聚合硅酸硫酸铝铁的制备与应用

在n(Fe A1)／n(Si)为0．5～1．0、n(Al)／n(Fe)为2．5～3．0、SiO2质量分数为2．3％、硅酸钠溶液的活化pH为5．5、硅酸钠溶液的活化时间为12min或SiO2的质量分数为2．0％、硅酸钠溶液的活化pH为6．0、硅酸钠溶液的活化时间为3min的条件下，制备出的聚合硅酸硫酸铝铁对废水的除浊效果最佳，除浊率大于98％。     

拉伸加载下老化复合固体推进剂的损伤演化定量分析

目的 定量分析老化对拉伸加载下复合固体推进剂细观损伤演化的影响规律。方法 开展不同老化时间（0、32、74、98 d）下三组元端羟基聚丁二烯（HTPB）复合固体推进剂的热加速老化试验,以及老化后推进剂的微型哑铃形试验件在不同拉伸应变水平（0、5%、10%、20%、40%、50%）下的微CT扫描观测试验,并对扫描重构图像进行定量分析,获得老化对推进剂细观损伤演化的影响规律。结果 随拉伸应变增加,老化前后推进剂微CT图像的灰度均方差、平均孔隙率和图像的分形维数均呈非线性增加趋势,图像的灰度均值呈非线性减小趋势。在较低应变水平（<10%）下,上述参数受老化时间的影响不显著,但随拉伸应变增加（≥10%）和老化时间增长,灰度均方差、平均孔隙率、孔隙率增量和分形维数的数值整体增高,而灰度均值随老化时间的增长而降低,且不同老化时间下,分形维数与平均孔隙率之间存在正线性关系。结论 重构得到微CT图像的灰度均值、平均孔隙率和分形维数可作为表征参数,用于定量分析老化复合固体推进剂在拉伸载荷下的细观损伤和损伤的动态演化规律,推进剂的初始损伤和小应变下的损伤程度受老化的影响较弱,而老化时间对推进剂细观损...     

成型秸秆炭吸附剂对水中Cd2+的去除特性

以水稻秸秆为原料,制取对Cd2+去除效果最佳的成型生物炭吸附剂。采取限氧升温方法,分析不同热解温度和不同热解时间的成型炭对Cd2+去除规律和特性。研究结果表明：热解温度不变,热解时间90 min去除率最大;热解时间不变,热解温度550 ℃时去除率最大;去除速率分快、慢两阶段,快阶段2 h内去除率最低达到76.83%,慢阶段10 h去除率仅20%左右;该成型炭对Cd2+吸附规律可用准二级动力模型进行拟合,拟合度Rmax2=0.987 2,该成型炭对Cd2+吸附不是单层吸附过程,而存在大量的阳离子交换量,化学反应较强烈。     

PLA、PPC或PBAT与2次改性小麦秸秆全降解复合材料的力学性能与生态风险

制作复合材料是小麦秸秆资源化利用的有效途径之一。小麦秸秆的改性处理对制成的复合材料力学性能有很大影响,且不同的基体材料与小麦秸秆制成的复合材料性能也有所不同。以聚乳酸（PLA）、聚碳酸亚丙酯（PPC）、聚己二酸（PBAT）为基体材料,分别以改性前或碱处理及偶联剂方法2次改性后的小麦秸秆纤维为增强材料,采用压缩成型工艺制备了6种全降解复合材料,并对制成的6种复合材料进行了力学性能测试与比对;分析了3种改性后小麦秸秆制成的全降解复合材料的降解性能,并通过种子发芽实验研究了它们的浸提液的潜在生态风险。结果表明,2次改性小麦秸秆与基体材料制成的复合材料,其力学性能较原始秸秆与基体材料制成的复合材料有明显的增强,其拉伸、弯曲、冲击强度均有20%~50%的提升。3种可降解材料降解率由大到小的顺序为：PLA全降解复合材料 > PBAT全降解复合材料 > PPC全降解复合材料。质量分数1%的3种全降解复合材料浸提液对种子发芽过程基本不造成影响。     

微生物絮凝剂M-C11处理高岭土悬浊液的响应曲面优化

采用响应曲面法对微生物絮凝剂M-C11处理高岭土悬浊液的过程参数进行优化,选取中心复合实验设计(CCD),以pH、M-C11投加量和CaCl2投加量等因素为自变量,以处理后的高岭土悬浊液絮凝率(Fr)为响应值,并借助扫描电镜对絮凝剂的作用机理进行初步探讨。结果表明,微生物絮凝剂M-C11可显著改善高岭土悬浊液的絮凝性能,且选取的3种单因素水平均可影响絮凝剂活性。经多元回归拟合分析,在M-C11投加量为2.56 mL,CaCl2 投加量为0.37 g/L的最优条件下,微生物絮凝活性实验值可达92.37%,接近模型预测值(92.30%)。CaCl2 投加量对絮凝效果的影响高于M-C11投加量(PCaCl2PM-C11)。Ca2+可中和高岭土颗粒表面负电荷,絮凝剂分子为悬浮颗粒提供吸附结合位点,促进絮体凝聚沉淀,M-C11絮凝机理是电中和、吸附架桥和网捕等联合作用的结果。     

铜铈复合氧化物催化降解甲基橙

采用水热法制备的铜铈复合氧化物能够直接催化降解甲基橙,探究了铜铈摩尔比、pH、投加量对催化降解效果的影响。研究发现,pH=3.5、Cu/Ce=1、投加量1.0 g·L-1时,甲基橙的降解效果最佳。在0.5~1.0 g·L-1之间时,随着投加量的增加,甲基橙的脱色速率加快,脱色率也有所增加。随着溶液中的pH逐渐下降,甲基橙脱色率有所增加,pH=3.5时,甲基橙脱色率最高;而进一步降低pH至3.0时,脱色率反而下降,可能是强酸腐蚀了金属氧化物表层,降低了甲基橙的降解效果。甲基橙主要因其被降解而脱色,促使甲基橙脱色的活性物质为·OH,且与体系中的分子氧有关,反应过程消耗一定的H+。     

酸化-复合絮凝法预处理煤化工废水

煤化工废水是一种高浓度难降解的化工废水,需要进行预处理以降低后续深度处理的负荷。在煤化工废水过滤和酸化沉降的基础上,分别选取聚合硫酸铁(PFS)、聚合氯化铝(PAC)和明矾(KA1(SO4 )2·12H2O)3种絮凝剂对酸化处理后的煤化工废水进行絮凝沉淀实验并比较其处理效果,从而选出最佳絮凝剂PFS,并用PFS配合助凝剂聚丙烯酰胺(PAM)作复合絮凝剂处理煤化工废水;同时探讨了其他两种絮凝剂分别和聚丙烯酰胺(PAM)复配的效果。研究表明:过滤后废水在pH=3时达到最佳酸化条件;在pH=8时采用聚合硫酸铁(PFS)和聚丙烯酰胺(PAM)以50:1质量比复配效果最好,废水COD去除率达到最大77.83%;氨氮、挥发酚和色度也明显降低,其去除率分别达到83.70%、69.01%和95.71%。该最佳预处理方案成本低、操作简单,是一种预处理煤化工废水经济有效的途径。