垃圾转运站污水回用处理工艺设计

垃圾转运站污水回用处理采用了膜 -生物反应器处理工艺 ,它具有高效、稳定、工艺流程简单、设备占地面积小和投资少等优点 ,且处理后出水可用于自身站内所需 ,即冲车、喷洒道路、冲厕、绿化、冲刷车间地面等多种用途 ,实现了污水处理后再利用的目的。     

膜生物反应器处理印染废水技术研究

采用小试规模(148L/d)的厌氧-好氧膜生物反应器处理印染废水.当水力停留时间为14小时,进水COD、色度分别为208.54～2592.00mg/l、32～256倍,通过水解酸化-体式膜生物反应器试验,系统对COD、色度的去除率分别达到了80%～90%、87.5%.出水水质浓度或指标分别为21.80～363.20mg/l、8倍,具有良好的处理效果.厌氧-好氧膜生物反应器工艺处理印染废水技术可行、操作简单、易于管理、可为工业规模应用提供技术参考.     

兼性生化处理生活污水最佳工况研究

在常温条件下进行兼性生化处理生活污水试验,研究COD去除率与HRT、MLSS、进水有机物浓度和混合液水温的关系。在试验中最佳的水平搭配为MLSS=5500mg/L,进水有机物浓度=180mg/L,HRT=8h和混合液水温=20℃,与回归分析所得出MLSS=5881mg/L,进水有机物浓度=192.7mg/L,HRT=8.9063h和混合液水温=21.3790℃的最佳工艺条件相吻合。最后通过等高线分析得出常温下生活污水兼性生化的适宜范围。     

Shifts in microbial community structure and diversity in a MBR combined with worm reactors treating synthetic wastewater

The chemical oxygen demand (COD) and NH₃-N removal, membrane fouling, sludge characteristics and microbial community structure in a membrane bioreactor (MBR) coupled with worm reactors (SSBWR) were evaluated for 210 days. The obtained results were compared to those from a conventional MBR (C-MBR) operated in parallel. The results indicated that the combined MBR (S-MBR) achieved higher COD and NH₃-N removal efficiency, slower increase in membrane fouling, better sludge settleability and higher activities of the related enzymes in the activated sludge. Denaturing gradient gel electrophoresis was used to analyze the microbial community structures in the C-MBR and the S-MBR. The microbial community structure in the S-MBR was more diverse than that in the C-MBR. Additionally, the slow-growing microbes such as Saprospiraceae, Actinomyces, Frankia, Clostridium, Comamonas, Pseudomonas, Dechloromonas and Flavobacterium were enriched in the S-MBR, further accounting for the sludge reduction, membrane fouling alleviation and wastewater treatment.     

Performance and microbial community of a membrane bioreactor system——Treating wastewater from ethanol fermentation of food waste

In this study, a lab-scale biological anaerobic/anaerobic/anoxic/membrane bioreactor(A_-~3MBR) was designed to treat wastewater from the ethanol fermentation of food waste,a promising way for the disposal of food waste and reclamation of resources. The 454 pyrosequencing technique was used to investigate the composition of the microbial community in the treatment system. The system yielded a stable effluent concentration of chemical oxygen demand(202 ± 23 mg/L), total nitrogen(62.1 ± 7.1 mg/L), ammonia(0.3 ±0.13 mg/L) and total phosphorus(8.3 ± 0.9 mg/L), and the reactors played different roles in specific pollutant removal. The exploration of the microbial community in the system revealed that:(1) the microbial diversity of anaerobic reactors A_1 and A_2, in which organic pollutants were massively degraded, was much higher than that in anoxic A_3 and aerobic MBR;(2) although the community composition in each reactor was quite different, bacteria assigned to the classes Clostridia, Bacteroidia, and Synergistia were important and common microorganisms for organic pollutant degradation in the anaerobic units, and bacteria from Alphaproteobacteria and Betaproteobacteria were the dominant microbial population in A_3 and MBR;(3) the taxon identification indicated that Arcobacter in the anaerobic reactors and Thauera in the anoxic reactor were two representative genera in the biological process. Our results proved that the biological A_-~3MBR process is an alternative technique for treating wastewater from food waste.     

MBR＋纳滤＋反渗透工艺处理垃圾渗滤液实验研究

摘要：结合青岛市某生活垃圾处理场工程实例,介绍了MBR工艺处理垃圾渗滤液的工艺流程、原理等,分析了MBR工艺处理垃圾渗滤液的特点和优势。垃圾渗滤液经过MBR工艺处理,生化部分采用前置反硝化／硝化工艺,再经纳滤／反渗透等膜分离技术和其他方法处理,最终流出液水质可以达到《生活垃圾填埋场污染控制标准》（GB16889—2008）。     

UAFB-缺氧-好氧MBR组合工艺处理生活污水效能研究

为了同时达到从生活污水中回收能源性气体和深度处理生活污水的目的,试验采用升流式厌氧污泥固定床(up-flowanaerobic fixed bed,UAFB)-缺氧-好氧膜生物反应(membrane bioreactor,MBR)组合工艺处理生活污水.试验重点研究了组合工艺对生活污水的处理效能,包括能源性气体的产生效能、对污染物质的处理效能以及对污泥浓度的控制.UAFB-缺氧-好氧MBR组合工艺在温度20℃、厌氧HRT为3 h、缺氧HRT为3 h、好氧HRT为3.5 h的条件下运行,甲烷气体的产生量为1.55L/d,COD去除率为93.28%,NH 4+-N去除率为90.60%,UAFB出水VFAs总量54.74 mg/L,TN去除率为45.51%.试验发现,组合工艺可以长期维持反应器内较低的污泥浓度,大大减小了剩余污泥的处理量,在一定程度上实现了污泥减量化,同时较低的污泥浓度有利于缓解膜污染.     

SRT影响MBR有机污染物去除速率研究

通过考察污泥停留时间(SRT)对膜生物反应器(MBR)和粉末活性炭膜生物反应器(PAc-MBR)降解有机物速率的影响,探讨了污泥活性与胞外聚合物(EPS)的关系.结果表明:MBR和.PAC-MBR中COD降解速率随SRT延长均呈先上升后下降的趋势,分别在39～48d和48d时达到最快,对应速率常数为2.586和3.856,PAC-MBR中COD降解速率普遍高于MBR,说明投加PAC使污泥活性提高,SRT对污泥活性影响较大;MBR和PAC-MBR中胞外聚合物质量浓度与COD降解速率常数K1变化趋势一致,且胞外聚合物质量浓度与K1呈良好正相关关系,说明系统的胞外聚合物质量浓度可以作为衡量污泥活性的指标.     

电化学产电菌的分离及性能评价

利用兼性滚管法分离了折流板空气阴极微生物燃料电池(BAFMFC)A、B两格室的阳极生物膜,共获得19株纯菌.将菌株投加至无菌立方型反应器中,检验其产电特性.利用交流阻抗法测量各纯菌电池的内阻,结果显示38个电池的欧姆内阻为25Ω±5Ω,说明了各电池的产电差异来源于菌株本身的活性.其他运行条件均保持不变,在1000Ω外阻下,7株纯菌电池的输出电压在200mV以上.其中,A格室产电活性最高的菌株(A2)产生的最大电压为328mV,输出的最大功率密度为165.1mW/m2,B格室产电活性最高的菌株(B1)最大电压为241mV,最大功率密度为214.4mW/m2.原子力显微镜和脂肪酸快速鉴定表明,A2为肠杆菌科的杆菌,B1为厚壁菌门的芽孢杆菌.     

低温A/O-MBR工艺启动试验研究

研究了A/O-MBR工艺低温(水温在5~12℃)启动效能,结果表明,低温下A/O-MBR工艺启动迅速,活性污泥的培养驯化时间较短。启动过程中根据出水水质情况,逐渐提高负荷,运行34 d,系统对COD的去除率能达到90%以上,系统对氨氮的去除率能达到96%以上,至稳定运行后氨氮的负荷平均可达到0.419kg/(m3.d),反硝化效果系统去除率基本能稳定在60%左右。