矿热炉炉壳安装作业危险性分析

为减少事故损失,必须对矿热炉安装施工危险源进行分析。基于此,对矿热炉安装工序中最重要工序炉壳安装应用作业危险性分析进行分析。将炉壳安装作业分成3大部分,用鱼刺图分析方法进行分析,总结出矿热炉炉壳安装中事故发生的主要原因并提出对策措施,以预防和减少事故的发生。     

Review: recent advances in biogas purifying technologies

Biomethane production through biogas upgrading is a promising renewable energy for some industries which could be part of the equilibrium needed with fossil fuels consumption to achieve a sustainable society. This paper presents a comprehensive list of biogas upgrading technologies focused on carbon dioxide removal as well as recent advances reported by researcher with wide expertise in this topic. Additionally, an extensive costs–performance comparison among the technologies studied is discussed. Among the different alternatives, chemical scrubbing stood out to achieve high biomethane purities while cryogenic technologies proved to be effective against methane losses. Regarding the different costs, water scrubbing and membrane separation seem to be the most affordable techniques.     

Advanced molecular-fingerprinting analysis of dissolved organic sulfur by electrospray ionization-Fourier transform ion cyclotron resonance mass spectrometry using optimal spray solvent

Molecular level characterization of dissolved organic sulfur (DOS) by electrospray ionization-Fourier transform ion cyclotron resonance mass spectrometry (ESI-FTICR MS) is necessary for further understanding of the role of DOS in the environment. Here, ESI spray solvent, a key parameter for ion production during ESI process, was investigated for its effect on the molecular characterization of DOS by ESI-FTICR MS. 100% MeOH as spray solvent was found for the first time to remarkably enhance the ionization efficiency of the majority of CHOS-molecules in NOM, which facilitated a total of 1473 CHOS-molecular formulas with one sulfur atom to be detected. The number of CHOS-molecular formulas obtained using 100%MeOH as spray solvent increased notably over 740 in comparison with those using 50% MeOH aqueous solution (731) or 50% ACN aqueous solution (653). Moreover, due to the enhancement of ionization efficiency of DOS during ESI processes, the tandem mass spectra of the NOM CHOS-molecules could be easily obtained using 100% MeOH as spray solvent, which were hardly obtained using 50% MeOH aqueous solution as spray solvent. The results of the tandem mass spectra suggested the first discovery of organosulfates or sulfonic acids in Suwannee River NOM sample. A simple method based on 100% MeOH as ESI spray solvent for advanced molecular characterization of DOS by ESI-FTICR MS was proposed and applied, and the results revealed more molecular information of DOS in sea DOM samples.     

郑州市氧化铝工业炉窑污染物及源谱特征

采用稀释通道采样法对郑州市一家拜耳法氧化铝企业及一家α-氧化铝企业的PM_2.5、PM₁₀样品进行采集,利用烟气分析仪检测SO₂和NO_x气体的质量浓度.对颗粒物样品中的38种化学组分进行分析,构建相应的源成分谱,运用分歧系数（CD）和组分差异权重分布函数R/U对其特征进行对比研究.结果表明：α-氧化铝源谱中以Cl^-为主（质量分数18.29%~25.21%）,拜耳法氧化铝源谱中以OC和NO₃^-为主（质量分数9.01%~41.87%）.源谱间的分歧系数（CD）显示,同一种生产工艺两种粒径间的源谱比较相似,相同粒径的两种生产工艺之间的源谱差异较大.R/U值对比结果显示,EC、Ca、F^-和Cl^- 4种元素可作为区分两种氧化铝生产工艺的标识组分.     

重金属离子对肺表面活性物质单层膜的影响

为了探究重金属对肺表面活性物质（PS）膜的影响,利用Langmuir–Wilhelmy膜天平,研究了不同种类和浓度的重金属离子与PS单层膜的相互作用.发现Cr³⁺、Cu²⁺、Hg²⁺、Pb²⁺、Cd²⁺、Ni²⁺6种重金属离子均使PS单层的π-A等温线G-LE相变阶段外扩,而Fe³⁺可诱导单层缩合.随后,选取Cd²⁺,Cu²⁺,Hg²⁺,Fe³⁺4种离子进一步探究了重金属浓度对PS单层膜表面活性的影响规律,进行了可压缩模量分析,并结合红外光谱（FTIR）和原子力显微镜（AFM）探究其作用机理,发现Cu²⁺,Fe³⁺和Hg²⁺均会以浓度依赖的方式与PS单层的极性头部发生络合作用,形成复合物,改变膜的稳定性;而Cd²⁺的影响明显弱于其他3种金属离子,但也能使得PS单层有序性增强.     

磁性氧化石墨处理乳化含油废水及磁致增强效应

以高铁酸钾为氧化剂,基于改进Hummers法制备了新型磁性氧化石墨材料,在SEM、FTIR、氮气吸脱附和表面接触角表征基础上,探究了该材料处理乳化含油废水的效果及磁致增强效应.结果表明：相较于石墨,磁性氧化石墨比表面积增大,表面有卷曲结构并负载着Fe₃O₄颗粒,具有含氧官能团,存在疏水性较强的微观孔隙结构.在外加磁场条件下,磁性氧化石墨团聚,形成疏水性宏观孔隙结构,利于乳化油滴的吸附和附着.磁性氧化石墨处理乳化含油废水的能力远好于石墨与粉末活性炭,且处理效率与磁场强度成正相关,COD去除率可达95%以上.使用后的磁性氧化石墨进行溶剂萃取或热处理,可以循环使用.磁性氧化石墨经过4次循环使用,热再生效率为92%,溶剂萃取再生效率为86%.以上研究为乳化含油废水的处理提供了一种有效的方法.     

石墨炉原子吸收光谱法测定海河下游水中痕量镉

原子吸收光谱法直接测定高盐水中痕量镉时，有很大背景吸收和误差。本文采用络合—萃取技术使共存元素与待测元素分离，既消除了基体干扰，又达到了富集作用，使测定结果准确可靠。     

湿法吸收测定大气中的五氧化二磷

用２％ＮａＯＨ溶液吸收大气中的Ｐ２Ｏ５，用钼锑抗试剂显色定量。对样品的稳定性、方法的显色条件、精密度、准确度以及检出限进行反复试验，结果令人满意。     

环境水体中痕量酚类化合物气相色谱-质谱联用测定法研究

建立了液-液萃取-气相色谱/质谱联用仪测定环境水体中痕量酚类化合物的方法。用乙酸乙酯萃取环境水中的痕量酚类化合物,加入萘-d8作为内标,利用气相色谱-质谱联用仪选择离子监测(SIM)的方式进行检测,内标法定量,定性、定量准确,线性响应良好,回归曲线的相关系数均>0.999,平均回收率在89.4%~104%之间,精密度好,相对标准偏差<7.4%;抗干扰能力强,检测灵敏度高,水样中最低检测浓度可达0.001mg/L,经实际样品测定完全能满足环境水体中痕量酚类化合物监测的要求。     

龙岩市区大气颗粒物中多环芳烃的种类和时空分布特征及来源

采用恒能量同步荧光法检测了龙岩市大气颗粒物样品中的多环芳烃(PAHs),比较了龙岩市区大气颗粒物中多环芳烃含量的差异以及不同季节对多环芳烃含量的影响,讨论了其分布规律及污染源。