Catalytic performance of copper and cerium oxides-based γ-Al_2O_3 on combustion of toluene

以γ-Al2O3为载体,以复合氧化物CuxCe1-xO2为活性组分,其中,x=0.1,0.2,0.4,0.6,0.8,通过浸渍法制备了一系列CuxCe1-xO2/γ-Al2O3催化剂.在固定床反应器中评价了催化剂对甲苯的催化活性,通过XRD、SEM对催化剂进行表征,并运用ICP-MS分析并计算Cu、Ce的摩尔比以及活性组分的负载量.结果表明,在CuxCe1-xO2/γ-Al2O3催化剂中Cu、Ce摩尔比的实际值与理论值相近,活性组分的负载量在19%以上,而且对甲苯都有较好的低温催化活性,其中当x=0.2时,即Cu0.2Ce0.8O2/γ-Al2O3催化剂对甲苯的催化活性最高,其中T10=160℃,T90=265℃;当甲苯的进口浓度在700～3000mg·m-3时,进口浓度对Cu0.2Ce0.8O2/γ-Al2O3催化剂的催化活性影响较小,且经过连续80h的稳定性操作后转化率仍然保持在90%以上.     

Photocatalytic remediation of γ-hexachlorocyclohexane contaminated soils using TiO2 and montmorillonite composite photocatalyst

TiO2 and montmorillonite composite photocatalysts were prepared and applied in degrading γ-hexachlorocyclohexane(γ-HCH)in soils.After being spiked with γ-HCH,soil samples loaded with the composite photocatalysts were exposed to UV-light irradiation.The results indicated that the photocatalytic activities of the composite photocatalysts varied with the content of TiO2 in the order of 10%＜70%＜50%＜30%.Moreover,the photocatalytic activity of the composite photocatalysts with TiO2 content 30% was higher than that of the pure P25 with the same mass of TiO2.The strong adsorption capacity of the composite photocatalysts and quantum size effect may contribute to its increased photocatalytic activities.In addition,effect of dosage of composite photocatalysts and soil pH on γ-HCH photodegradation was investigated. Pentachlorocyclohexene,trichlorocyclohexene,and dichlorobenzene were detected as photodegradation intermediates,which were gradually degraded with tlle phOtOdegradation evolution.     

小冲杆试验测定重离子辐照A508-3钢的硬化和脆化

目的采用小冲杆测试方法测量高能重离子辐照反应堆压力容器A508-3钢的辐照硬化和脆化特性,为工况条件下反应堆压力容器寿命预测提供实验依据。方法采用兰州重离子加速器提供的高能C^(6+)离子通过减能装置在290℃条件下开展A508-3钢辐照实验,并在样品表面形成一定厚度、准均匀分布的离位损伤层。通过开展不同辐照剂量辐照样品的小冲杆测试,得到不同辐照剂量A508-3钢的小冲杆载荷-位移曲线。通过对小冲杆测试得到的载荷-位移曲线的分析,测定不同辐照剂量样品的辐照硬化和脆化特性。结果压力容器A508-3钢辐照样品的硬化和脆化随着辐照剂量的增加逐渐增强,0.15 dpa以前呈线性增长,而后缓慢增大,约0.2 dpa时达到饱和趋势。结论通过小冲杆测试可以得到离子辐照样品的硬化和脆化行为,A508-3钢辐照硬化和脆化行为具有一致的变化趋势。     

无人机用航空铝合金材料激光毁伤特性缩比实验研究

目的 通过开展激光对无人机用航空铝合金材料的缩比毁伤实验,为研究激光对无人机的毁伤特性及规律奠定基础,为激光武器的战技指标论证提供科学可靠的参考数据。方法 采用缩比模型法,利用激光对航空铝靶板进行毁伤实验,记录烧穿时间、光斑直径、激光功率等参数,并通过等效性修正实验对毁伤规律进行分析。结果 毁伤缩比实验中,随着尺度律cP的增加,航空铝板的平均击穿时间逐渐延长,击穿所需的激光能量密度基本符合线性增加规律。修正实验中,随着航空铝板厚度的增加,击穿时间逐渐延长,实验拟合曲线与理论曲线具有较好的一致性。结论 通过缩比实验与修正实验,可建立激光对航空铝合金材料的毁伤模型公式,根据激光参数推算毁伤阈值及击穿时间。     

三硝基甲苯的γ-辐照降解实验研究

基于三硝基甲苯(TNT)溶液采用常规处理方法难以降解,采用60Co-γ射线对三硝基甲苯溶液进行辐照降解,研究了吸收剂量、初始浓度、溶液初始pH值、双氧水(H2O2)等因素对辐照降解效果的影响.实验结果表明,60Co-γ射线辐照能够有效地降解三硝基甲苯.三硝基甲苯溶液初始浓度为5—50 mg.L-1,当接受不超过15 kGy剂量时,三硝基甲苯的降解率可达100%,化学需氧量(COD)去除率可达55%;弱酸性和碱性环境更有利于三硝基甲苯的降解和COD的去除;加入少量H2O2时,三硝基甲苯降解率和COD去除速率均随之增加,但过高的H2O2加入量将会抑制三硝基甲苯的去除,并且加入H2O2的量愈大其抑制作用愈明显.     

江苏省2011年环境γ辐射剂量率测量比对

为了保证辐射监测数据的准确,江苏省辐射环境监测管理站组织了2011年全省环境γ辐射剂量率测量比对。结果表明,22台仪器测量结果满意,1台仪器测量数据可疑,所有仪器均未出现不满意或离群结果。测量比对有效地发现了测量存在的问题,保证监测工作结果的准确性。     

附生假单胞菌存在下不同光照时间对铜绿微囊藻生长与磷代谢的影响

通过设置8/16、12/12、16/8不同光暗比,分析了附生细菌存在下不同光照时间对铜绿微囊藻(M icrocystis aeruginosa)生长及其与附生假单胞菌(Pseudom onassp.)磷代谢之间关系的影响。结果表明:光照时间越长,铜绿微囊藻生长越快,16 h光照下的比增长速率为8 h光照下的1.6倍。铜绿微囊藻的快速生长促进了附生细菌中磷的释放;藻细胞增殖越快,附生细菌释放的磷越多。铜绿微囊藻对数生长期末,8、12、16 h光照下附生细菌磷含量分别降至对数生长初期的87.8%、78.6%和64.9%。铜绿微囊藻对附生细菌磷释放的促进作用是由藻细胞生长对磷的消耗再吸收导致的。     

Non-UV based germicidal activity of metal-doped TiO2 coating on solid surfaces

A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit （invitrogen, molecular probes） was used for staining the cell. The screening was carried out following a standard procedure. This included loading cell suspension to solid surface and maintaining contact for 30 min, then staining with a mixture containing dyes. The stained cells were observed using an epifluorescent microscope and photographed with a CCD camera under UV. Metal-doped TiO2 coatings on AI plates were prepared and tested for non-UV germicidal activity without using UV. It was tested using model microorganisms such as Bakers Yeast （Saccharomyces cerevisiae）, Bacillus subtilis, Pseudomonas putida, and Escherichia coli. On the basis of the germicidal activity of catalyst and the degree of damage caused to the cells, the stained cells may appear green （viable）, green with red or yellow nuclei and yellow （compromised） or red （nonviable）. According to their stained color, cells were counted to calculate the percentage of dead, live, and compromised cells. Compromised cells are cells that grow very slowly after reculturing indicating a degree of reversible cell damage. Screening the germicidal activity using this staining method is accurate and efficient, and requires less time than the culture-based method. A modification to the procedure for measuring germicidal activity of rough surfaces or fibrous coatings was developed. Both TiO2 and metal-doped TiO2 （Ag, Pt, Au, Cu） possess non-UV based germicidal activity. The germicidal activity of TiO2 was found to be related with its wetting property and can be improved by UV irradiation before testing. It is not greatly affected by contact time, indicating a fast acting germicidal activity.     

铜基催化剂上甲苯深度氧化的机理分析

运用浸渍法制备了一系列CuO/γ-Al2O3催化剂,利用FTIR、MS、XRD等技术研究了甲苯在该催化剂上的深度氧化的性能及反应机理。初步讨论了活性氧化铝上铜的最佳负载量,铜在催化剂中的作用,以及甲苯在该催化剂上不同条件下反应的中间产物和最终产物及其产生机理。     

水溶液中邻二氯苯的超声去除

研究了超声辐照技术去除模拟废水中的邻二氯苯的效果和影响因素,包括超声电功率、初始浓度、溶液初始pH值、空气曝气以及自由基抑制剂等;研究结果表明,超声辐照去除邻二氯苯主要以空化泡内的高温热解为主,并分析了邻二氯苯超声去除的途径和机理。