首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   3212篇
  免费   302篇
  国内免费   1303篇
安全科学   369篇
废物处理   142篇
环保管理   274篇
综合类   2936篇
基础理论   211篇
污染及防治   735篇
评价与监测   46篇
社会与环境   37篇
灾害及防治   67篇
  2024年   28篇
  2023年   89篇
  2022年   156篇
  2021年   178篇
  2020年   133篇
  2019年   178篇
  2018年   134篇
  2017年   119篇
  2016年   160篇
  2015年   183篇
  2014年   349篇
  2013年   211篇
  2012年   206篇
  2011年   217篇
  2010年   209篇
  2009年   217篇
  2008年   263篇
  2007年   248篇
  2006年   218篇
  2005年   179篇
  2004年   184篇
  2003年   122篇
  2002年   110篇
  2001年   82篇
  2000年   81篇
  1999年   62篇
  1998年   63篇
  1997年   67篇
  1996年   53篇
  1995年   55篇
  1994年   49篇
  1993年   62篇
  1992年   41篇
  1991年   39篇
  1990年   32篇
  1989年   31篇
  1988年   2篇
  1987年   4篇
  1986年   3篇
排序方式: 共有4817条查询结果,搜索用时 46 毫秒
181.
酸化液对厌氧释磷好氧吸磷速率的影响研究   总被引:3,自引:1,他引:2  
采用序批式试验研究了酸化液对聚磷菌厌氧释磷好氧吸磷速率的影响。同一活性污泥混合液中聚磷菌的释磷潜力相当,混合液中挥发性脂肪酸越多则越有利于激发聚磷菌的释磷潜能。酸化液投加量越大,对应的混合液中聚磷菌的平均释磷速率也越大。当酸化液投加量为30 mg/L(以TOC计)时,聚磷菌的平均释磷速率达0.137 mg/(mg.d),是未投加酸化液工况的3.26倍。聚磷菌厌氧释磷过程中,活性污泥的MLVSS值逐渐增大,而MLSS值却不断减小,这是由聚磷菌释磷反应过程中聚磷颗粒和糖原的消耗,以及PHB的生成而产生的。碳源充足与否,对聚磷菌的平均好氧吸磷速率影响不大,研究各工况中,聚磷菌的平均吸磷速率在0.129~0.160 mg/(mg.d)内。碳源越充足,则聚磷菌在好氧吸磷反应持续的时间越长,因此,具有更强的超量吸磷能力。酸化液投加量为20 mg/L时(以TOC计),聚磷菌在好氧吸磷结束时,出水的SP浓度能减少到0.5 mg/L以下。  相似文献   
182.
Competition of three bloom-forming marine phytoplankton (diatom Skeletonema costatum, and dinoflagellates Prorocentrum minimum and Alexandrium tamarense) was studied through a series of multispecies cultures with di erent nitrate (NaNO3) and phosphate (NaH2PO4) levels and excess silicate to interpret red tide algae succession. S. costatum outgrew the other two dinoflagellates in nitrate and phosphate replete cultures with 10 mol/L Na2SiO3. Under nitrate limited (8.82 mol/L NaNO3) conditions, the growth of S. costatum was also dominant when phosphate concentrations were from 3.6 to 108 mol/L. Cell density of the two dinoflagellates only increased slightly, to less than 400 and 600 cells/mL, respectively. Cell density of S. costatum decreased with time before day 12, and then increased to 4000 cells/mL (1.5 mg/L dry biomass) at NaNO3 concentrations between 88.2 and 882 mol/L with limited phosphate (0.36 mol/L NaH2PO4) levels. In addition, P. minimum grew well with a maximal cell density of 1690–2100 cells/mL (0.5–0.6 mg/L dry biomass). Although S. costatum initially grew fast, its cell density decreased quickly with time later in the growth phase and the two dinoflagellates were dominant under the nitrate-limited and high nitrate conditions with limited phosphate. These results indicated that the diatom was a poor competitor compared to the two dinoflagellates under limited phosphate; however, it grew well under limited nitrate when growth of the dinoflagellates was near detection limits.  相似文献   
183.
Pretreatment of thickened waste activated sludge (TWAS) by combined microwave and alkaline pretreatment (MAP) was studied to improve thermophilic anaerobic digestion efficiency. Uniform design was applied to determine the combination of target temperature (110–210°C), microwave holding time (1–51 min), and NaOH dose (0–2.5 g NaOH/g suspended solids (SS)) in terms of their effect on volatile suspended solids (VSS) solubilization. Maximum solubilization ratio (85.1%) of VSS was observed at 210°C with 0.2 g-NaOH/g-SS and 35 min holding time. The effects of 12 different pretreatment methods were investigated in 28 thermophilic batch reactors by monitoring cumulative methane production (CMP). Improvements in methane production in the TWAS were directly related to the microwave and alkaline pretreatment of the sludge. The highest CMP was a 27% improvement over the control. In spite of the increase in soluble chemical oxygen demand concentration and the decrease in dewaterability of digested sludge, a semi-continuous thermophilic reactor fed with pretreated TWAS without neutralization (at 170°C with 1 min holding time and 0.05 g NaOH/g SS) was stable and functioned well, with volatile solid (VS) and total chemical oxygen demand (TCOD) reductions of 28% and 18%, respectively, which were higher than those of the control system. Additionally, methane yields (L@STP/g-CODadded, at standard temperature and pressure (STP) conditions of 0°C and 101.325 kPa) and (L@STP/g VSadded) increased by 17% and 13%, respectively, compared to the control reactor.  相似文献   
184.
Laboratory reactors were operated by using piggery wastewater and the effluent of anaerobic digester from piggery wastewater plants to study the effect of anaerobic digestion on nitritation rate.  相似文献   
185.
以人工配制的含硫酸盐有机废水作为原水,研究不同COD/SO42-值下厌氧折流板反应器(ABR)处理含硫酸盐有机废水去除率.试验结果表明:当COD/SO42-<14.8时COD的去除率可达95%,SO42-的去除率在86%~96%之间;当COD/SO42-在14.8~4.0之间时,COD的去除率有所下降但仍能保持在94%...  相似文献   
186.
采用批式发酵法对厌氧产氢菌株Bacteria.P利用葡萄糖发酵,在底物浓度、初始pH值、接种比例等不同培养条件下的产氢能力进行了研究。结果表明:专性厌氧菌P是一种高效产氢的菌株,在葡萄糖质量浓度为10 g/L、初始pH为6.0、接种比例为1∶20时,发酵气体总产量和细胞干重达到最大值,分别为485 mL和0.836 g/L。  相似文献   
187.
控制游离氨实现单级自养生物脱氮的研究   总被引:2,自引:1,他引:1  
通过实时调控SBR反应器内的游离氮浓度的控制策略,实现以亚硝化作用和厌氧氨氧化作用协同的单级自养生物脱氮工艺.实验分成亚硝酸菌富集和厌氧氨氧化菌混合接种2个阶段,SBR内的温度始终保持在(31±2)℃.亚硝酸菌富集阶段,pH值稳定在7.8左右,通过调节进水氩氮浓度(56~446 mg·L-1)实现FA浓度的变化,从而实...  相似文献   
188.
长江口邻近海域沉积物中厌氧氨氧化细菌分布特征研究   总被引:2,自引:1,他引:1  
付璐璐  甄毓  贺惠  张玉  米铁柱 《环境科学》2016,37(10):3914-3922
海洋生态系统氮素循环对维持海洋生态收支平衡具有重要意义,由厌氧氨氧化细菌(anaerobic ammonia-oxidizing bacteria,ANAMMOX Bacteria)推动的厌氧氨氧化过程是海洋氮素移除的重要途径.本研究采用荧光定量PCR(q PCR)技术,并结合环境理化因子,分析了2011年夏季长江口邻近海域沉积物中厌氧氨氧化细菌的种群丰度分布特征.结果表明,厌氧氨氧化细菌的种群丰度在长江口邻近海域的空间分布与环境因子密切相关,总有机碳含量、盐度、铵盐浓度对长江口邻近海域沉积物中厌氧氨氧化细菌的种群丰度具有重要调控作用.厌氧氨氧化细菌的丰度分布与总有机碳含量呈显著正相关关系(P0.01,r=0.69),同时又随亚硝酸盐浓度、溶解氧浓度的升高而降低,而盐度对厌氧氨氧化细菌丰度分布的影响较为复杂.  相似文献   
189.
通过叶菜类蔬菜垃圾中温批式厌氧消化实验,比较了含固率(3%、5%、7%)和接种比(1.5、2.5、3.5)对产甲烷效果的联合影响.结果表明,在研究实验参数范围内,含固率越低、接种比越高,越有利于缩短产甲烷反应迟滞期,平均日产甲烷速率越快.经过52d的培养,在含固率为3%、接种比为3.5的工况中,平均日产甲烷速率最快,达到9.5mL/(gVS·d),日最大产甲烷速率最快,达到49.8mL/(gVS·d),最早进入快速产甲烷期.当接种比为3.5时,随着含固率的升高,产甲烷速率下降,迟滞期延长,但单位底物累计产甲烷量增大,含固率7%时单位底物累计净产甲烷量为481mL/gVS.而当接种比为1.5时,含固率为5%和7%的工况均无法启动甲烷化反应,含固率为3%的工况的产气迟滞期达15d.挥发性有机酸的累积抑制甲烷化反应的启动,迟滞期随着液相中有机酸浓度的增加而延长,当有机酸浓度低于1260mg/L,甲烷化反应没有明显的迟滞期.  相似文献   
190.
以油页岩灰渣制备的水玻璃为原料,采用不同种类的硅烷偶联剂,在常压下制备了多孔疏水SiO2气凝胶。实验结果表明:在常压干燥之前,对湿凝胶进行溶剂交换-表面改性,是获得多孔气凝胶的关键。未加入硅烷偶联剂制备的气凝胶具有微孔结构;不同硅烷偶联剂制备的SiO2气凝胶均为纳米颗粒组成的中孔结构,比表面积800~980 m2/g,密度0.084~0.11 g/m3,最可几孔径9.38~10.10 nm;FT-IR分析结果表明凝胶表面Si-OH已被改性为Si-CH3,表面呈现较强的疏水性,且疏水性HMDZ>TMCS>DMDC。TG-DTA实验结果表明,改性气凝胶的热稳定性都能达到350℃,HMDZ和TMCS的气凝胶具有更高的热稳定性。  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号