加速度传感器安装件对飞机振动环境测量影响的探讨

简述了标准对加速度传感器安装的要求,分析了加速度传感器安装件（胶木块和角铝）的振动特征,对安装件进行了试验和数据分析,推荐了飞机振动环境测量时加速度传感器安装件的使用方法。     

电磁辐射职业危害及防护对策

科技飞速发展的今天,射频及微波技术已经广泛应用于国民经济的各个领域,这使得越来越多的从业人员在工作场所受到电磁辐射污染的影响。本文总结归纳了我国电磁辐射职业危害状况,分析了现代企业电磁辐射防护的新特点,并提出企业电磁辐射防护对策。     

电流互感器常见故障的处理方法

正互感器是一种利用电磁原理进行电压、电流变换的变压器类设备,在电力系统广泛被使用,它是将电力系统一次回路中的电量信息按一定的比例关系传递到二次回路提供给测量仪表和继电保护装置等二次设备,对系统进行监     

Photocatalytic activity of TiO2 containing anatase nanoparticles and rutile nanoflower structure consisting of nanorods

A series of TiO2 with different crystal phases and morphologies was synthesized via a facile hydrothermal process using titanium nbutoxide and concentrated hydrochloric acid as raw materials. The photocatalytic activity of the samples was evaluated by degradation of Methyl Orange in aqueous solution under UV-Visible light irradiation. On the basis of detailed analysis of the characterizing results of high-resolution transmission electron microscopy, X-ray powder diffraction measurements, X-ray photoelectron spectroscopy and Brunauer-Emmett-Teller measurement, it was concluded that the photo-activity of the catalyst is related directly to the 3D morphology and the crystal phase composition. An excellent catalyst should have both a futile 3D flower-like structure and anatase granulous particles. The 3D flower-like structure could enhance light harvesting, as well as the transfer of reactant molecules from bulk solution to the reactive sites on TiO2. In addition, the optimum anatase/rutile phase ratio was found to be 80：20, which is beneficial to the effective separation of the photogenerated electron-hole pairs.     

Fabrication and photoelectrocatalytic properties of nanocrystalline monoclinic BiVO4 thin-film electrode

Monoclinic bismuth vanadate(BiVO4) thin film was fabricated on indium-tin oxide glass from an amorphous heteronuclear complex via dip-coating.After annealation at 400,500,and 600°C,the thin films were characterized by X-ray diffraction,field emission scanning electron microscopy,X-ray photoelectron spectroscopy,and UV-Vis spectrophotometry.The BiVO4 particles on the ITO glass surface had a monoclinic structure.The UV-Visible diffuse reflection spectra showed the BiVO4 thin film had photoabsorption propertie...     

南京一次大雾过程边界层特征分析

雾、霾影响空气质量,特定气象条件有利于雾、霾形成。利用南京大学仙林综合观测基地的近地层湍流资料以及MICAPS气象资料,分析了2011年11月18日南京一次大雾过程的边界层特征。结果表明,大雾发生前后南京处于高空低压槽前,西南暖湿气流向南京地区输送充足的水汽,而近地面主要受到低压倒槽的控制,使得近地层相对湿度一直在90%以上。边界层上空(约300~500 m)存在很强很厚的逆温层,近地层动量通量几乎为0,感热通量也几乎为0,表明大雾期间南京地区大气一直处于稳定的边界层中,近地层湍流很微弱,有利于大雾的形成和维持。能谱分析表明,能谱高频段满足-2/3率,但中低频率部分可能由于非均匀下垫面地形的影响,分布比较杂乱。     

基于噪声指数的首都经济贸易大学校园声环境评价

文章在对首都经济贸易大学校园进行声功能区环境噪声监测的基础上,分析和计算了各区域测点噪声超标值（△LAeq）、噪声指数（LKZ）和噪声污染指数（PN）;从强度和影响人群人数两个角度评价校园声环境质量。结果表明,首都经济贸易大学校园声环境质量处于较差的水平,噪声强度超标率达到82％;据此,课题对校园噪声污染现状进行了影响分析和声环境质量的等级评定,最后针对污染现状提出了相关措施和建议。     

土壤胡敏素对铜离子的吸附作用及其机理研究

以暗棕壤为供试土壤,研究了不同溶液pH值、离子强度、接触时间、反应温度和初始铜离子(Cu~(2+))浓度条件下,胡敏素对Cu~(2+)的吸附作用;利用扫描电子显微镜(SEM)、X-射线能量色散谱(EDS)、傅立叶变换红外光谱(FTIR)和X-射线光电子能谱(XPS),对胡敏素/胡敏素-Cu~(2+)复合物的表面形貌、元素分布和官能团组成进行了分析;应用延展X-射线吸收精细结构谱(EXAFS),对吸附态Cu~(2+)的局域配位结构进行了表征.结果表明:胡敏素对Cu~(2+)的吸附量随pH值、接触时间、反应温度和Cu~(2+)浓度的增加而增加,但随离子强度的增加而下降;吸附动力学符合准二级动力学方程,而吸附等温线用Langmuir方程的拟合效果较好;吸附过程需要能量,是自发、吸热和自由度增加的缔合反应;吸附Cu~(2+)之后,胡敏素表面产生了团聚现象,表面羧基、羟基、吡啶氮和N—O基团参与了Cu~(2+)的吸附作用,同时吸附态Cu~(2+)是以内层配位形式与胡敏素表面的O/N和C原子结合.     

原子吸收分光光度法测定水中铅的不确定度评定

对GB/T 7475-1987《水质铜、铅、锌、镉的测定》〔1〕原子吸收分光光度法测定水中铅的测量不确定度进行了评定。通过测量重复性、滴定管、移液管、标准溶液浓度等影响测量结果的不确定度分量的分析和量化,求得水中铅测定结果的相对合成标准不确定度。     

Ultrasonic preparation of nano-nickel/activated carbon composite using spent electroless nickel plating bath and application in degradation of 2,6-dichlorophenol

Ni was effectively recovered from spent electroless nickel （EN） plating baths by forming a nano-nickel coated activated carbon composite. With the aid of ultrasonication, melamine- formaldehyde-tetraoxalyl-ethylenediamine chelating resins were grafted on activated carbon （MFT/AG）. PdC12 sol was adsorbed on MFT/AC, which was then immersed in spent electroless nickel plating bath; then nano-nickel could be reduced by ascorbic acid to form a nano-nickel coating on the activated carbon composite （Ni/AC） in situ. The materials present were carefully examined by Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, X-ray photoelectron spectroscopy and electro- chemistry techniques. The resins were well distributed on the inside and outside surfaces of activated carbon with a size of 120 ± 30 nm in MFT/AC, and a great deal of nano-nickel particles were evenly deposited with a size of 3.8 ± 1.1 nm in Ni/MFT. Moreover, Ni/AC was successfully used as a catalyst for ultrasonic degradation of 2.6-dichloronhenol.