基于各向异性粒子介电常数张量重构的散射特性研究

目的简化各向异性介质中的光电传播、目标散射识别等问题。方法基于电场强度矢量和电位移矢量的关系,提出将各向异性介质的介电常数张量重构为对角张量通用方法。结果给出了对角张量元素的表达式和对应单位特征矢量,并作了详细的数值计算。得到了单位特征矢量坐标系中电磁场与原坐标系中电磁场的变换关系以及磁导率张量的变换关系;所用方法具有通用性,所得结果具有实用性。结论在各向异性介质研究领域,可实现特征坐标系中的电磁场及介质参数与主坐标系的电磁场与介质参数的相互定量转换。     

典型水库型湖泊中CDOM吸收及荧光光谱变化特征:基于沿岸生态系统分析

为进一步了解水库型湖泊溶解性有机质(DOM)的地球化学特征,本文以三峡库区典型内陆水库型湖泊——长寿湖为研究对象,利用紫外-可见和三维荧光光谱,并结合湖区周边生态系统分析,讨论了长寿湖水体中CDOM的组成、来源和空间分布特征.结果表明,长寿湖不同采样点DOM浓度(DOC和CDOM)存在一定程度的空间分布差异,但各点FDOM分布较为稳定.回水区出现DOM累积,由于受陆源输入影响有限,水体内源活动主导,具有较明显"内源控制"特征,芳香性和分子量相对较低;而周边陆地以人工林兼旅游开发为主的采样点,陆源输入在带入较多腐殖化(高芳香性)组分的同时,人为活动排放也是导致其类蛋白组分丰富的重要原因;入湖区尽管周边果林和居民生活对水体DOM有一定影响,但上游河流输入的影响也不容忽视.另外,各采样点也出现了不受周边生态系统影响的独立的相关性特征,例如芳香性特征常数(SUVA280)和光谱斜率[S(275~295)]显著负相关、CDOM和FDOM极显著正相关、CDOM和S(275~295)负相关等.同时,长寿湖水体中CDOM的生色团主要由具有芳香性结构的大分子组分构成;至少51%的CDOM波动可以通过FDOM变化来进行解释,其中回水区荧光组分对CDOM变动的影响最为明显.在采用传统FI值无法区分DOM来源差异性时,结合采样点沿岸生态系统,综合紫外-可见和荧光光谱特征,有助于对DOM组成及来源进行解析.     

KrBr*准分子灯直接光解一甲胺气体

研究了正弦电源驱动的207 nm KrBr*准分子灯光解气相中的一甲胺(MA).考察了降解的影响因素(气体流速、初始浓度、输入功率),测定了灯的输入功率和辐射光谱.为了评价光解过程,对去除效率、能率、碳平衡和CO2的选择性这4个参数进行了研究.结果表明,去除率随着灯的输入功率升高、气体流速的降低以及气体初始浓度的升高而升高.能率与一甲胺初始浓度呈正相关性,输入功率为65.1 W时能率最高.输入功率升高,气体流速下降,碳平衡和CO2选择性都略有升高.当灯的输入功率为79.8 W,气体流速9.0 m3·h-1,初始浓度为2 897 mg·m-3,一甲胺去除率为56.8%,能率为185.6g·(kW·h)-1,相应的碳平衡和CO2选择性为16.8%和10.3%.最后,利用气质联用仪测定了一甲胺降解的产物,结合一甲胺的吸收光谱,推测了一甲胺的光解机制.     

基于地基遥感数据的太湖地区气溶胶光学厚度和粒子谱变化规律研究

利用多光谱旋转遮蔽影带辐射计(Multi-Filter Rotating Shadowband Radiometer,MFRSR)测定了我国长江三角洲中部的太湖地区2008年5月至2009年4月期间415 nm、500 nm、615 nm、673 nm、870 nm波段的全天空总辐射、散射辐射和直接辐射通量密度,结合球形粒子的Mie散射理论反演了该地区大气气溶胶粒子谱,并对结果进行了分析.结果表明:受人为活动的影响,该地区工作日和非工作日气溶胶光学厚度和粒子谱的日变化存在明显的差异,工作日上午6:00-9:00时间内,细粒子的生成远大于非工作日这一期间细粒子的生成.太湖地区气溶胶光学厚度常年较高,500 nm波段的年平均值为0.8038±0.7924,夏季最大(0.9359±0.7389),冬季最小(0.6209±0.5500);气溶胶粒子谱表现出双峰分布,一种是位于半径0.15 μm附近的细模态,另一种是半径3μm左右的粗模态,且夏季和秋季细粒子较多,而其他季节粗粒子较多.气溶胶光学厚度以及气溶胶粒子谱分布的季节变化受到气象条件的显著影响.降水过程对大气气溶胶具有明显的冲刷作用,并且降水后大气气溶胶的增加与气溶胶粒子大小有关,积聚态粒子浓度的增加比粗模态粒子的增加更快.     

Degradation of direct azo dye by Cucurbita pepo free and immobilized peroxidase

Enzymatic decolourization of the azo dye, Direct Yellow (DY106) by Cucurbita pepo (courgette) peroxidase (CP) is a complex process, which is greatly affected by pH, temperature, enzyme activity and the concentrations of H₂O₂ and dye. Courgette peroxidase was extracted and its performance was evaluated by using the free-CP (FCP) and immobilized-CP (ICP) forms in the decolourization of DY106. Immobilization of peroxidase in calcium alginate beads was performed according to a strategy aiming to minimize enzyme leakage and keep its activity at a maximum value by optimizing sodium alginate content, enzyme loading and calcium chloride concentration. The initial conditions at which the highest DY106 decolourization yield was obtained were found at pH 2, temperature 20℃, H₂O₂ dose 1 mmol/L (FCP) and 100 mmol/L (ICP). The highest decolourization rates were obtained for dye concentrations 50 mg/L (FCP) and 80 mg/L (ICP). Under optimal conditions, the FCP was able to decolorize more than 87% of the dye within 2 min. While with ICP, the decolourization yield was 75% within 15 min. The decolourization and removal of DY106 was proved by UV-Vis analysis. Fourier transform infrared (FT-IR) spectroscopy analysis was also performed on DY106 and enzymatic treatment precipitated byproduct.     

Electrochemical and spectroscopic characteristics of dissolved organic matter in a forest soil profile

Dissolved organic matter （DOM） represents one of the most mobile and reactive organic compounds in ecosystem and plays an important role in the fate and transport of soil organic pollutants, nutrient cycling and more importantly global climate change. Electrochemical methods were first employed to evaluate DOM redox properties, and spectroscopic approaches were utilized to obtain information concerning its composition and structure. DOM was extracted from a forest soil profile with five horizons. Differential pulse voltammetry indicated that there were more redox-active moieties in the DOM from upper horizons than in that from lower horizons. Cyclic voltammetry further showed that these moieties were reversible in electron transfer. Chronoamperometry was employed to quantify the electron transfer capacity of DOM, including electron acceptor capacity and electron donor capacity, both of which decreased sharply with increasing depth. FT-IR, UV-Vis and fluorescence spectra results suggested that DOM from the upper horizons was enriched with aromatic and humic structures while that from the lower horizons was rich in aliphatic carbon, which supported the findings obtained by electrochemical approaches. Electrochemical approaches combined with spectroscopic methods were applied to evaluate the characteristics of DOM extracted along a forest soil profile. The electrochemical properties of DOM, which can be rapidly and simply obtained, provide insight into the migration and transformation of DOM along a soil profile and will aid in better understanding of the biogeochemical role of DOM in natural environments.     

浅谈烟尘采样的两种分析验证方案

本文应用两种污染物传递数学模型分析烟尘采样过程,第一个模型假设烟尘经过采样后又经过一段物理运动重新达到平衡,因此得到采样后烟尘浓度和采样器内浓度的数学等式,第二种模型则是在第一种的模型基础之上给出烟尘浓度随,的变化而变化的数学表示式子.     

固相萃取-红外分光光度法测定水中的总油

建立了固相萃取(SPE)-红外分光光度测定水中总油的方法,并对固相萃取条件进行了优化,实验表明,对于1L添加2mg标准油的水样,其总油的回收率为86%-93%,多次重复实验测定的相对标准偏差为2.9%(n=6)。     

红外系统对点源目标作用距离的优化计算

作用距离是红外系统核心性能指标之一,受大气、背景等多方面因素的影响。针对传统作用距离计算方法存在的局限,综合考虑多个影响因素,提出了一种优化计算方法,首次精确计算了作用距离与实际距离之差的大气衰减值,并对计算方法进行了验证。结果表明,优化计算方法具有较好的计算精度,可用于红外系统性能预测和整体设计。     

ε-聚赖氨酸生产废菌体对六价铬吸附影响的研究

以ε-聚赖氨酸(ε-PL)发酵生产废菌体小白链霉菌(Streptomyces albulus)PD-1为研究对象,探讨了其对吸附Cr(Ⅵ)的影响.实验过程中,对预处理方式、pH、初始Cr(Ⅵ)浓度、吸附时间和温度等因素进行了考察.结果表明,HCl预处理的菌体具有较好的吸附能力,Cr(Ⅵ)的吸附增加率达到22.7%,最佳pH为2.0左右,温度对Cr(Ⅵ)的吸附影响不大.实验过程中分别采取Langmuir和Freundlich 2种吸附等温模型对实验数据进行了拟合,得到2个模型的线性相关系数R2分别为0.979 4和0.979 8,这表明吸附过程中既存在单层吸附同时也存在复杂的多层吸附,小白链霉菌对Cr(Ⅵ)的最大理论吸附量为23.92mg.g-1.通过傅里叶变换红外光谱分析,酰胺基和羟基等基团在吸附过程中起主要作用.