群体感应淬灭菌的分离及其膜污染控制性能

通过淬灭细菌的群体感应系统来抑制生物膜形成、防止膜生物污染的方法近年来受到广泛关注.本实验从实际运行污水处理厂活性污泥中分离出5株具有群体感应淬灭功能的菌株,其中菌株HG10对信号分子N-乙酰高丝氨酸环内酯(C6-HSL)分解能力最强.经16S rRNA基因序列比对,初步鉴定为蜡样芽孢杆菌(Bacillus cereus).用海藻酸钠将菌株HG10进行包埋固定,以探究其在膜过滤系统中对膜污染防治的效果.结果表明,经过8 d培养,添加细菌包埋珠(SA-HG10)的实验组B中膜通量为181.29 L·(m~2·h)~(-1),未投加包埋珠的对照组A膜通量为110.64 L·(m~2·h)~(-1),B组膜通量比A组高出63.86%;对微滤膜片上生物膜中EPS含量测定表明,实验组B中EPS多糖和蛋白质含量较对照组A分别减少了29%和48%,疏水性蛋白质含量的大量减少是造成膜污染减弱的主要原因;膜表面胞外聚合物(EPS)总含量减少了43%,表明投放SA-HG10细菌包埋珠对过滤膜片上生物膜形成具有明显抑制作用,改善了膜过滤性能.     

Fe-MnOx-CeO2/ZrO2低温催化还原NO性能研究

以纳米ZrO2为载体,用浸渍法制备出Fe-MnOx-CeO2/ZrO2催化剂,考察了活性组分配比和助剂负载量对催化剂低温NH3选择性催化还原NO活性的影响,并对催化剂进行了XRD、SEM、EDS和BET表征;探讨了温度、H2O和SO2对Fe-MnOx-CeO2/ZrO2催化剂低温下NH3选择性催化还原NO的影响,结果表明,无SO2和H2O条件下,8%Fe-10%MnOx-CeO2/ZrO2催化剂具有良好的催化活性和稳定性.120℃时,催化剂的脱硝效率为85.23%,当温度升至180℃时,脱硝效率可达到92.0%.SO2和H2O共存条件下,催化剂易失活,采用傅立叶变换红外光谱对各反应阶段的催化剂进行了表征,对其失活机制进行深入研究,结果表明,催化剂失活的主要原因是催化剂表面硫酸铵盐的沉积和催化剂本身活性成分的硫酸盐化.     

H2S匀圆杂选择性催化氧化工艺及催化剂研究现状

论述了石油流化催化裂化烟气中H2S气体的选择性催化氧化处理工艺和工艺中所使用的各种类型选择性氧化催化剂.目前已发展并投入使用的选择性氧化工艺主要有:Superclaus工艺、Euroclaus工艺、Clinsulf-Do工艺、BSR/Hi-Activity工艺、Selectox工艺和Modop工艺等,各工艺具有不同的特点和应用范围.H2S选择氧化催化剂主要包括以下几种体系:碳体系、SiC载体体系、分子筛体系、氧化物体系和柱撑黏土体系等.其中碳体系和氧化物体系的研究开展的较早较多,关于分子筛体系的研究近期有所减少,SiC是研究人员认为非常有潜力的一个载体体系,其相关体系研究也一直在进行之中,柱撑黏土体系还处于初步研究阶段,离实际应用尚有距离.     

固定化果胶酶抑制铜绿微囊藻生长研究

为证实固定化果胶酶抑制蓝藻生长的作用,在实验室条件下,以铜绿微囊藻（Microcystis aeruginosa）为受试藻种,用共培养法观察了固定化果胶酶对藻细胞群体的作用、用电镜观察了共培养后藻细胞的损伤状况,测定了对其生理生化特征的影响.结果表明固定化果胶酶与藻共培养液第3 d明显黄化,且黄化程度与固定化果胶酶的用量和培养时间呈正相关系;电镜照片显示固定化果胶酶对藻细胞有损伤作用,轻微损伤的藻细胞出现质壁分离,表面粗糙、凸凹不平,形状不规则,严重损伤的藻细胞表面发生深度皱缩或细胞结构完全解体;随着固定化果胶酶与铜绿微囊藻共培养时间的延长,藻细胞生长量、叶绿素a含量显著降低,表明藻细胞受到胁迫和伤害,藻细胞正常的光合作用受到严重影响.丙二醛（MDA）值显示藻细胞抗氧化防御体系被破坏,细胞内发生严重膜脂过氧化.固定化果胶酶能有效抑制铜绿微囊藻细胞的生长,铜绿微囊藻生长抑制率可高达96%.     

改良型固定化Pseudomonas oleovorans DT4降解四氢呋喃的研究

成功构建出了新型的海藻酸钠-活性炭纤维复合固定化Pseudomonas oleovorans DT4来去除四氢呋喃,并优化了该复合固定化载体组分的含量,发现在海藻酸钠含量为3%,活性炭纤维含量为1.5%条件下,制备成细胞浓度为6×109g-1的协同固定化细胞在初始THF浓度为360 mg·L-1时的降解速率达到最大为24.0 mg·(L.h)-1,同时其机械强度也得到了显著的提升.此外与游离菌体相比,该固定化细胞在不同温度和pH条件下的降解速率表现得更加稳定,且去除效果均能稳定在80%以上.在改进的反应体系中,协同固定化小球高效降解THF的重复利用次数达到80批以上,显示出该载体良好的可行性.     

Degradation of direct azo dye by Cucurbita pepo free and immobilized peroxidase

Enzymatic decolourization of the azo dye, Direct Yellow (DY106) by Cucurbita pepo (courgette) peroxidase (CP) is a complex process, which is greatly affected by pH, temperature, enzyme activity and the concentrations of H₂O₂ and dye. Courgette peroxidase was extracted and its performance was evaluated by using the free-CP (FCP) and immobilized-CP (ICP) forms in the decolourization of DY106. Immobilization of peroxidase in calcium alginate beads was performed according to a strategy aiming to minimize enzyme leakage and keep its activity at a maximum value by optimizing sodium alginate content, enzyme loading and calcium chloride concentration. The initial conditions at which the highest DY106 decolourization yield was obtained were found at pH 2, temperature 20℃, H₂O₂ dose 1 mmol/L (FCP) and 100 mmol/L (ICP). The highest decolourization rates were obtained for dye concentrations 50 mg/L (FCP) and 80 mg/L (ICP). Under optimal conditions, the FCP was able to decolorize more than 87% of the dye within 2 min. While with ICP, the decolourization yield was 75% within 15 min. The decolourization and removal of DY106 was proved by UV-Vis analysis. Fourier transform infrared (FT-IR) spectroscopy analysis was also performed on DY106 and enzymatic treatment precipitated byproduct.     

废弃SCR脱硝催化剂的再生及其脱硝性能研究

对废弃脱硝催化剂处理后重新加工再生,研究了添加剂对其粉体成型和再生催化剂脱硝活性的影响,探讨了反应温度、空速、n(NH3)∶n(NO)摩尔比、氧含量、H2O和SO2对再生催化剂NH3选择性催化还原(SCR)NO的影响。结果表明:最佳再生条件是使用5%羧甲基纤维素和10%无机粘结剂辅助成型;废弃催化剂再生利用率高达90%;再生催化剂抗压强度为4.73 MPa,优于商用催化剂;空速5 000 h-1、氨氮摩尔比1、氧含量6%时,脱硝活性温度窗口为310⁴50℃,350℃时活性最高为94%;350℃时,单独通入1 000×10-6SO2或10%H2O对再生催化剂活性均有一定抑制作用,最低活性分别为70%和81%,停止通入SO2或H2O后其活性逐渐恢复;同时通入1 000×10-6SO2和10%H2O,再生催化剂活性下降至63%并于1 h内保持相对稳定,停止通入SO2和H2O 2 h后,活性逐渐恢复到73%。     

不同材质对催化裂化装置催化剂粉尘粘附性能的试验研究

在三座DN150 mmX1600 mm有机玻璃塔试验装置上,考察了DN15的塑料拉西环、陶瓷拉西环和不锈钢拉西环三种材质填料对催化剂的粘附能力。在催化剂浓度5‰,液相负荷40 L/h,气相负荷80 m3/h的条件下,经过408h的连续运转,结果表明不同材质填料对催化剂的粘附能力均存在饱和状态,粘附在填料上的催化剂不随时间的持续增加而增多。其中,塑料填料对催化剂的粘附能力最强,增重0.125kg;不锈钢填料次之,增重为0.115kg;陶瓷填料最弱,增重为0.055kg。可为相关领域的工业应用提供借鉴和数据支撑。     

Fe2O3 particles as superior catalysts for low temperature selective catalytic reduction of NO with NH3

Fe203 particle catalysts were experimentally studied in the low temperature selective catalytic reduction （SCR） of NO with NH3. The effects of reaction temperature, oxygen concentration, [NH3]/[NO] molar ratio and residence time on SCR activity were studied. It was found that Fe203 catalysts had high activity for the SCR of NO with NH3 in a broad temperature range of 150-270℃, and more than 95% NO conversion was obtained at 180℃ when the molar ratio [NH3]/[NO] = 1, the residence time was 0.48 seconds and 02 volume fraction was 3%. In addition, the effect of SO2 on SCR catalytic activity was also investigated at the temperature of 180℃. The results showed that deactivation of the Fe2O3 particles occurred due to the presence of SO2 and the NO conversion decreased from 99.2% to 58% in 240 min, since SO2 gradually decreased the catalytic activity of the catalysts. In addition, X-ray diffraction, Thermogravimetric analysis and Fourier transform infrared spectroscopy were used to characterize the fresh and deactivated Fe2O3 catalysts. The results showed that the deactivation caused by SO2 was due to the formation of metal sulfates and ammonium sulfates on the catalyst surface during the de-NO reaction, which could cause pore plugging and result in suppression of the catalytic activity.     

基于阳离子树脂的Fenton非均相催化剂制备及性能测试

采用阳离子交换树脂颗粒为催化剂载体采用浸渍法负载二价铁离子,制备出非均相Fenton反应催化剂,并用该非均相Fenton催化剂氧化脱色亚甲基蓝溶液,考察其催化性能。实验结果表明:制备催化剂时最佳FeSO4浓度为16.67 mmol/L,pH=3.0,H2O2初始浓度为46.6 mmol/L,反应时间为30 min的条件下,亚甲基蓝溶液初始浓度为0.028 mmol/L时,亚甲基蓝溶液在非均相Fenton催化氧化过程中,其脱色率可达92.9%。采用序批形式反应使用5次后,该非均相催化剂仍有良好的催化效果,反应30 min后亚甲基蓝溶液脱色率仍可达85.2%,拓宽了Fenton技术的使用范围。