Visible light responsive N-F-codoped TiO2 photocatalysts for the degradation of 4-chlorophenol

Visible light responsive N-F-codoped TiO₂ photocatalysts exhibit a higher catalytic activity than N-doped TiO₂ for the degradation of 4-chlorophenol due to the synergistic effect of nonmetal elements.     

吸附树脂负载铁酞菁催化降解硝基苯的研究

在可见光照射下,采用吸附树脂负载铁酞菁催化过氧化氢降解硝基苯.考察了光照、催化剂投加量、双氧水投加量、温度及pH值等因素对催化效果的影响.结果表明,在功率为50W卤钨灯照射下,硝基苯溶液初始质量浓度为200 mg/L,初始pH值为3,催化剂投加量为1.5 g/L,双氧水投加量为1.0 mL/L,温度为35℃下反应10h,硝基苯去除率可达到79.9％.     

Reaction mechanism and metal ion transformation in photocatalytic ozonation of phenol and oxalic acid with Ag+/TiO2

Photocatalytic ozonation of phenol and oxalic acid （OA） was conducted with a Ag^＋/TiO2 catalyst and different pathways were found for the degradation of different compounds. Ag^＋ greatly promoted the photocatalytic degradation of contaminants due to its role as an electron scavenger. It also accelerated the removal rate of OA in ozonation and the simultaneous process for its complex reaction with oxalate. Phenol could be degraded both in direct ozonation and photolysis, but the TOC removal rates were much higher in the simultaneous processes due to the oxidation of hydroxyl radicals resulting from synergetic effects. The sequence of photo-illumination and ozone exposure in the combined process showed quite different effects in phenol degradation and TOC removal. The synergetic effects in different combined processes were found to be highly related to the properties of the target pollutants. The color change of the solution and TEM result confirmed that Ag＋ was easily reduced and deposited on the surface of Tit2 under photo-illumination, and dissolved again into solution in the presence of ozone. This simple cycle of enrichment and distribution of Ag^＋ can greatly benefit the design of advanced oxidation processes, in which the sequences of ozone and photo-illumination can be varied according to the needs for catalyst recycling and the different properties of pollutants.     

Photocatalytic activity of Fe-doped CaTiO3 under UV-visible light

The photocatalytic degradation of methylene blue（MB） over Fe-doped CaTiO3 under UV-visible light was investigated. The as-prepared samples were characterized using X-ray diffraction（XRD）, scanning electron microscope（SEM） equipped with an energy dispersive spectrometer（EDS） system, Fourier transform infrared spectra（FT-IR）, and UV-visible diffuse reflectance spectroscopy（DRS）. The results show that the doping with Fe significantly promoted the light absorption ability of CaTiO3 in the visible light region. The Fe-doped CaTiO3 exhibited higher photocatalytic activity than CaTiO3 for the degradation of MB.However, the photocatalytic activity of the Fe-doped CaTiO3 was greatly influenced by the calcination temperature during the preparation process. The Fe-doped CaTiO3 prepared at500°C exhibited the best photocatalytic activity, with degradation of almost 100% MB（10 ppm）under UV-visible light for 180 min.     

TiO2/粉煤灰光催化降解双氯芬酸钠研究

以燃煤电厂外排的废弃物粉煤灰(CFA)为载体,采用混合泥浆法将TiO2负载在CFA的表面,得到一种新型的复合光催化剂TiO2/CFA.对TiO2/CFA进行了扫描电镜分析、X射线衍射分析和氮吸附测试,并以双氯芬酸钠的光催化降解为评价手段,研究了TiO2负载量对TiO2/CFA光催化性能及重复使用性能的影响.结果表明,TiO2负载量的增加有助于提高TiO2/CFA的光催化性能,但当TiO2负载量过高时,CFA上的TiO2在水处理过程中容易脱落,对TiO2/CFA光催化剂的重复使用性能不利.本研究中,最佳的TiO2负载量约为50%,循环使用6次,其光催化降解效率没有明显降低,双氯芬酸钠的降解率均可达70%以上.     

ZnO-PMMA复合材料光催化去除水中低浓度氨氮

通过水热法制备纳米ZnO,采用热粘固法成功地将其负载于聚甲基丙烯酸甲酯(PMMA)微球表面,并对ZnO-PMMA复合材料光催化去除水中低浓度氨氮的能力进行了考察.同时,探究了负载比例、初始氨氮浓度、催化剂浓度和pH对低浓度氨氮去除效率的影响.实验结果显示,PMMA改善了纳米ZnO的分散性和光催化能力,ZnO-PMMA能够有效地催化去除氨氮废水.在汞灯照射下,当pH=12、温度为30℃时,1 g·L~(-1)的催化剂(ZnO-PMMA)对50 mg·L~(-1)的氨氮废水去除率达到66%,且反应产物硝氮和亚硝氮含量较低,体现了该催化剂具有将氨氮转化为N2的良好的光催化降解能力.同时,纳米材料可以简单方便地回收,减轻了对环境的潜在影响,符合绿色化学的原则.     

BiOCl/ZnMgAl-HTLCs复合材料光催化去除水中的甲基橙

以Mg(NO3)2·6H2O、Al(NO3)3·9H2O、Zn(NO3)2·6H2O、Bi(NO3)3·5H2O为主要原料,采用水热合成法,制备了Bi OCl/Zn Mg Al-HTLCs光催化剂,对其进行XRD、EDS、SEM、FT-IR、UV-Vis、TGA表征,并通过降解甲基橙(MO)实验,探究催化剂水热合成的p H、溶剂、温度对其光催化性能的影响.结果表明:Zn Mg Al-HTLCs改善了Bi OCl的分散性,Bi OCl/Zn Mg Al-HTLCs能够有效地催化去除水中的甲基橙,在p H=7.5、溶剂为水、T=140℃条件下,可见光催化活性最佳,光照60 min后对10 mg·L-1的甲基橙溶液(MO)的降解率均达到85%以上.综合表明,Bi OCl/Zn Mg Al-HTLCs是一种具有潜在应用前景的光催化剂.     

AgBr/g-C3N4复合光催化剂制备及其可见光催化性能

文章采用溶剂热法合成不同形貌和结构的g-C₃N₄半导体,超声法将AgBr原位沉淀在g-C₃N₄表面,成功制备出不同质量比AgBr/g-C₃N₄复合光催化剂。借助FE-SEM、BET、TGA、XRD、UV-Vis DRS等方法对制备样品的晶体结构、形貌、比表面积、热稳定性以及其光学性能进行了表征。结果表明：g-C₃N₄半导体呈现纳米管状结构,直径约为300 nm,管长约为800 nm;AgBr/g-C₃N₄-20%复合光催化剂比表面积可达为40.727 m²/g,孔体积0.110 cm³/g,孔半径为17.171 nm。以罗丹明B (RhB)为模拟污染物,考察光催化降解性能,结果表明AgBr/g-C₃N₄质量比为20%时,可见光催化80 min后,RhB降解率可达到97.4%。光催化机...     

漂浮负载型光催化剂制备及降解草甘膦研究

以漂珠(FP)为载体,采用溶胶-凝胶-浸渍法制备了漂浮负载型CdS/TiO2/FP复合膜光催化剂,通过SEM、XRD对其结构进行了表征.以甘草膦农药的光催化降解为模型反应,使用不同光源研究了CdS/TiO2/FP的光催化性能,探讨了影响催化剂活性的因素及采用太阳光做光源处理草甘膦的可行性.结果表明,经4层镀膜500℃热处理的20%(w/w)CdS/TiO2/FP光催化剂具有良好的光催化性能,最佳降解条件为:催化剂加入量3 g/L,初始pH 7～9,Fe2 浓度为2.0×10-3 mol/L.通气量200 mL/min.在最佳条件下,对135 mg/L草甘膦溶液降解率可以分别达到96.3%(125 W高压汞灯,60 min)和82.4%(太阳光,180 min).     

MoS_2/Bi_2S_3异质结光催化剂的制备及其光催化性能

以五水硝酸铋为铋源、钼酸钠为钼源、硫脲为硫源,采用简单的一步水热法合成了MoS_2/Bi_2S_3异质结光催化剂,采用XRD,SEM,TEM,BET,UV-Vis DRS技术对其进行了表征。表征结果显示,MoS_2纳米片在Bi_2S_3微棒表面生长,增加了比表面积和活性位点,并形成异质结构,促进了光生载流子的迁移,抑制了电子-空穴对的再复合。实验结果表明:钼酸钠与五水硝酸铋的质量比为1∶2时制备的复合光催化剂性能最好,反应180min时对亚甲基蓝的去除率可达96.4%,明显高于MoS_2和Bi_2S_3,且具有较高的稳定性;该催化剂对罗丹明B、甲基橙和4-硝基苯酚的去除率分别为97.1%、93.1%和90.5%,表明其对污染物具有普适性。