砂蜡物理性质及其破坏形式研究北大核心

通过研究不同配比情况下砂蜡混合物标准样的单轴压缩实验,测定分析了其力学特性,并对试样压缩破坏的破裂情况进行了分析研究。结果表明,在含蜡量较小时,砂蜡的单轴抗压强度与蜡含量基本呈线性关系。而循环加载情况下,抗压强度变化不大;含蜡量高的砂蜡强度较大而变形较小,随着蜡含量的升高,砂蜡的割线模量E_(50)和弹性模量Et都增大,砂蜡试样的泊松比也呈现出上升趋势;砂蜡试样与煤岩试样相同,单轴压缩变形破坏形式也表现为复杂多变,蜡含量多(8%~14%)的砂蜡试样中多发生A类脆性剪切破坏型、B类楔劈式破坏型,而蜡含量低(4%~6%)的砂蜡试样破坏形式以C类挤压粉破柔性破坏型为主。     

亚热带土壤反硝化过程中NO-3-N对CH4排放的影响

研究了发育于不同成土母质和不同土地利用方式下的45个亚热带土壤样本,在反硝化严格厌氧培养条件下（密闭、淹水、充N₂）,加入KNO₃的处理（加入N量为200 mg·kg^-1）和不加KNO₃的空白对照对CH₄产生和排放的影响.结果表明,厌氧培养条件下无论加入KNO₃与否,CH₄的产生和排放首先取决于土壤有机碳总量水平及其有效性.对照土壤中花岗岩母质发育的土壤和KNO₃处理土壤中稻田利用方式下的土壤CH₄排放量最高.加入KNO₃显著抑制了CH₄的产生和排放,NO^-₃-N对CH₄产生的抑制效应可能较N₂O对CH₄产生的抑制效应更大.加入KNO₃处理中厌氧培养第1周内的NO^-₃-反硝化量和降低速率是决定CH₄排放量的关键因素.不加KNO₃的对照土壤中,73％的土样表现为 Fe²⁺的产生和CH₄的排放之间呈指数关系增长,表明Fe³⁺和CO₂的还原可同步进行.NO^-₃-N不仅显著抑制了CH₄的产生和排放,也抑制了Fe³⁺的还原.     

新型高效改性材料在重金属废水处理中的应用

使用原始吸附材料,如微生物、有机或无机材料等吸附废水中的重金属时,通常呈现较低的吸附性能,其吸附量通常都低于30mg/g。因此,研究者更多地关注提高各种吸附材料的吸附能力。国内外一些研究者采用新型、高效的物理或化学改性技术对吸附材料进行表面改造,如将高聚物接枝融合到菌体表面、表面分子印迹吸附剂、固定化微生物、酸改性处理有机或无机材料等,与常规材料相比,改性后材料对重金属的最大吸附容量一般可提高到100mg/g以上。随着各种改性技术的不断成熟,利用改性材料吸附重金属废水将成为今后研究重金属废水处理的主流方向。     

植物修复富营养化水体分子机理的研究现状

植物修复富营养化水体具有成本低、效果好、简单易行、且可改善生态环境等优点,具有广阔的应用前景.高等水生植物在生长过程中能够大量吸收水体中的N,P等营养物质,同时释放化学物质,抑制浮游藻类生长,从而达到净化水体的效果.在此主要从分子水平介绍了植物去除富营养化水体中N,P的作用机理.     

湘东北湘阴凹陷控盆断裂特征、盆地性质及动力机制研究

对白垩纪-古近纪洞庭盆地东部湘阴凹陷的北部进行了地表地质调查与研究.凹陷呈NE走向,沉积岩层倾向南东,且自南东往北西倾角变陡.凹陷南段宽、北段窄,其南东边界分别为倾向NW的公田断裂和忠防断裂,两断裂之间以走向NW、倾向南西的白羊田断裂和石姑桥断裂相连接.公田断裂为正断裂,白羊田断裂和石姑桥断裂为右旋平移正断裂,忠防断裂为左行平移正断裂;公田断裂和石姑桥断裂均经历了自韧性→脆性的转变过程.凹陷内部发育NE～NNE向小型同成盆正断裂.上述信息表明:① 湘阴凹陷为箕状断陷盆地;②公田断裂和忠防断裂的拉张活动控制了凹陷的形成和发展,区域N(N)E向左旋走滑应力场对凹陷北段有一定影响;③ 白羊田断裂和石姑桥断裂属横向调整断裂;④ 凹陷发展及其沉积充填,与南东面幕阜山隆起的抬升与剥蚀(包括沉积剥蚀和构造剥蚀)相耦合.结合区域资料,讨论认为湘阴凹陷形成的伸展构造环境受本地区特有的地幔上隆深部构造背景与中国东南部区域张性构造环境的双重制约,并以前者为主;凹陷走向主要受区域NNE向左行走滑应力场的控制.     

基于Monte-Carlo法的瑶寨隧道岩体结构性质评价

本文以瑶寨隧道为研究对象,结合现场地质分析与结构面统计,以Monte-Carlo法为基础,对该隧道各测线不同等级围岩分别进行结构面网络模拟,评价遂道岩体的结构性质,并进行工程岩体分类,估算其力学参数,以为采取合适的围岩支护方式提供依据。     

Synthesis, characterization, and adsorption performance of Pb（Ⅱ）-imprinted polymer in nano-TiO2 matrix

Surface ion-imprinted in combination with sol-gel process was applied to synthesis a new Pb(II)-imprinted polymer for selective separation and enrichment of trace Pb(II) from aqueous solution. The prepared material was characterized by using the infrared spectra, X-ray di ractometer, and scanning electron microscopy. The batch experiments were conducted to study the optimal adsorption condition of adsorption trace Pb(II) from aqueous solutions on Pb(II)-imprinted polymer. The equilibrium was achieved in approximately 4.0 h, and the experimental kinetic data were fitted the pseudo second-order model better. The maximum adsorption capacity was 22.7 mg/g, and the Langmuir equation fitted the adsorption isotherm data. The results of selectivity experiment showed that selectively adsorbed rate of Pb(II) on Pb(II)-imprinted polymer was higher than all other studied ions. Desorption conditions of the adsorbed Pb(II) from the Pb(II)-imprinted polymer were also studied in batch experiments. The prepared Pb(II)-imprinted polymer was shown to be promising for the separation and enrichment of trace Pb(II) from water samples. The adsorption and desorption mechanisms were proposed.     

Microbial biodegradation of microcystin-RR by bacterium Sphingopyxis sp. USTB-05

A strain,USTB-05,isolated from Lake Dianchi,China,degraded the cyanobacterial toxin microcystin-RR(MC-RR) at the rate of 16.7 mg/L per day.Analysis of 16S rDNA sequence showed that the strain was Sphingopyxis sp.Enzymatic degradation pathways for MC-RR by Sphingopyxis sp.USTB-05 were identified.Adda-Arg peptide bond of MC-RR was cleaved and then a hydrogen and a hydroxyl were combined onto the NH 2 group of Adda and the carboxyl group of arginine to form a linear molecule as intermediate product within the ...     

Selective removal of 2,4-dichlorophenoxyacetic acid from water by molecularly-imprinted amino-functionalized silica gel sorbent

A molecularly-imprinted amino-functionalized sorbent for selective removal of 2,4-dichlorophenoxyacetic acid(2,4-D) was prepared by a surface imprinting technique in combination with a sol-gel process.The 2,4-D-imprinted amino-functionalized silica sorbent was characterized by FT-IR,nitrogen adsorption and static adsorption experiments.The selectivity of the sorbent was investigated by a batch competitive binding experiment using an aqueous 2,4-D and 2,4-dichlorophenol(2,4-DCP) mixture or using an aqueous 2...     

Real-time fluorescent quantitative immuno-PCR method for determination of fluoranthene in water samples with a molecular beacon

A reliable and sensitive competitive real-time fluorescent quantitative immuno-PCR (RTFQ-IPCR) assay using a molecular beacon was developed for the determination of trace fluoranthene (FL) in the environment. Under optimized assay conditions, FL can be determined in the concentration range from 1 fg/mL to 100 ng/mL, with y = 0.194x + 7.859, and a correlation coe cient of 0.967 was identified, with a detection limit of 0.6 fg/mL. Environmental water samples were successfully analyzed, recovery was between 90% and 116%, with intra-day relative standard deviation (RSD) of 6.7%–12.8% and inter-day RSD of 8.4%–15.2%. The results obtained from RTFQ-IPCR were confirmed by ELISA, showing good accuracy and suitability to analyze FL in field samples. As a highly sensitive method, the molecular beacon-based RTFQ-IPCR is acceptable and promising for providing reliable test results to make environmental decisions.