中国地区经济差距及其演化的产业变动因素

20世纪90年代以来中国地区经济差距扩大具有深刻的产业变动原因。以人均GDP为基本指标,通过对基尼系数进行产业分解和对泰尔指数进行地区分解,深刻分析了1990~2004年中国地区经济差距的动态变化、地区构成和产业构成,揭示了中国地区经济差距及其演变的产业结构变动与产业地区集中因素。结果表明,1990年以来中国地区经济差距的决定性因素是第二产业发展水平的地区差距,而非农产业向东部沿海地区的集中又是推动中国地区经济差距扩大的主导性因素。20世纪90年代以来,随着以制造业为主的非农产业向东部沿海地区集中,中西部地区逐渐沦落为以农业与采掘业为主的外围区域,中国的地区经济差距也由此持续扩大。基于此,认为缩小地区差距的关键是推进中西部地区制造业发展,缓解非农产业地区分布的不平衡状况。     

Potential particulate pollution derived from UV-induced degradation of odorous dimethyl sulfide

UV-induced degradation of odorous dimethyl sulfide (DMS) was carried out in a static White cell chamber with UV irradiation. The combination of in situ Fourier transform infrared (FT-IR) spectrometer, gas chromatograph-mass spectrometer (GC-MS), wide-range particle spectrometer (WPS) technique, filter sampling and ion chromatographic (IC) analysis was used to monitor the gaseous and potential particulate products. During 240 min of UV irradiation, the degradation e ciency of DMS attained 20.9%, and partially oxidized sulfur-containing gaseous products, such as sulfur dioxide (SO2), carbonyl sulfide (OCS), dimethyl sulfoxide (DMSO), dimethyl sulfone (DMSO2) and dimethyl disulfide (DMDS) were identified by in situ FT-IR and GC-MS analysis, respectively. Accompanying with the oxidation of DMS, suspended particles were directly detected to be formed by WPS techniques. These particles were measured mainly in the size range of accumulation mode, and increased their count median diameter throughout the whole removal process. IC analysis of the filter samples revealed that methanesulfonic acid (MSA), sulfuric acid (H2SO4) and other unidentified chemicals accounted for the major non-refractory compositions of these particles. Based on products analysis and possible intermediates formed, the degradation pathways of DMS were proposed as the combination of the O(1D)- and the OH- initiated oxidation mechanisms. A plausible formation mechanism of the suspended particles was also analyzed. It is concluded that UV-induced degradation of odorous DMS is potentially a source of particulate pollutants in the atmosphere.     

聚丙烯中空纤维膜吸收法烟气脱硫实验研究

采用质量分数为30%的甲基二乙醇胺(MDEA)水溶液为烟气SO2吸收液,聚丙烯(PP)中空纤维微孔膜组件为吸收器,研究吸收液温度、流量变化,气体停留时间,以及气液两相流程等操作条件对聚丙烯(PP)中宅纤维膜脱硫率的影响,研究表明30%MDEA水溶液在温度35℃,流量100mL/min的最佳试验条件下,经过一个膜吸收过程...     

扬水曝气器曝气室提水性能模型应用研究

文章根据扬水曝气器曝气室的流体特性,在曝气室内气-液两相流体所受推动力和曳力平衡条件下,建立了一维两相流提水性能模型,并应用于同温层曝气器流体运动特性的模拟预测。结果表明:模型对同温层曝气器上升段气含率的估计值与实测值之间的误差限为±10%,对流体表观上升速度的误差限为±20%。这说明提水性能模型对同温层曝气器的流体特性模拟具有很强的适用性。     

微生物絮凝剂的絮凝性及抗氧化性研究

考察了一株产絮凝剂细菌BK-4所产絮凝剂的絮凝能力、组成及抗氧化性.结果表明,接种量2％、培养24 h后BK-4菌发酵液的最大絮凝率可达96.9％.发酵液的主要组成为多糖,提取方法对粗提物的絮凝率有明显影响,水溶醇沉法粗提物的最大絮凝率可达95.6％,粗提物多糖含量为1.65g/L时对DPPH自由基的捕获率可达最大值3...     

氧化亚铜类Fenton氧化降解染料活性艳蓝KN-R的研究

氧化亚铜(Cu2O)与H2O2组成的类Fenton体系能很好的氧化降解印染废水中的有机物.实验用Cu2O类Fenton氧化降解染料活性艳蓝KN-R,研究表明,Cu2O类Fenton能很好的氧化降解染料活性艳蓝KN-R.在KN-R的溶液初始pH值为2,水浴温度为50℃的条件下,用0.429 g Cu2O(0.3 mmol)和0.1 mL、质量分数为30%的H2O2处理50 mL、质量浓度为100mg/L的KN-R溶液1 h,其脱色率为95.09%,TOC去除率为56.38%.     

污水处理厂产泥量与进水水质关系的研究

为研究阜阳污水处理厂近几年来污泥产量与进水水质之间的关系,对自2007年1月份以来的产泥量与进水水质的基础数据进行了整理．并通过建立各个数据之间的相互关系图表来分析产泥量与进水水质之间的关系。     

含固率和接种比对叶菜类蔬菜垃圾厌氧消化的影响

通过叶菜类蔬菜垃圾中温批式厌氧消化实验,比较了含固率(3%、5%、7%)和接种比(1.5、2.5、3.5)对产甲烷效果的联合影响.结果表明,在研究实验参数范围内,含固率越低、接种比越高,越有利于缩短产甲烷反应迟滞期,平均日产甲烷速率越快.经过52d的培养,在含固率为3%、接种比为3.5的工况中,平均日产甲烷速率最快,达到9.5mL/(gVS·d),日最大产甲烷速率最快,达到49.8mL/(gVS·d),最早进入快速产甲烷期.当接种比为3.5时,随着含固率的升高,产甲烷速率下降,迟滞期延长,但单位底物累计产甲烷量增大,含固率7%时单位底物累计净产甲烷量为481mL/gVS.而当接种比为1.5时,含固率为5%和7%的工况均无法启动甲烷化反应,含固率为3%的工况的产气迟滞期达15d.挥发性有机酸的累积抑制甲烷化反应的启动,迟滞期随着液相中有机酸浓度的增加而延长,当有机酸浓度低于1260mg/L,甲烷化反应没有明显的迟滞期.     

Two-step accelerated mineral carbonation and decomposition analysis for the reduction of CO2 emission in the eco-industrial parks

Carbon dioxide（CO2） emissions are a leading contributor to the negative effects of global warming. Globally, research has focused on effective means of reducing and mitigating CO2 emissions. In this study, we examined the efficacy of eco-industrial parks（EIPs） and accelerated mineral carbonation techniques in reducing CO2 emissions in South Korea.First, we used Logarithmic Mean Divisia Index（LMDI） analysis to determine the trends in carbon production and mitigation at the existing EIPs. We found that, although CO2 was generated as byproducts and wastes of production at these EIPs, improved energy intensity effects occurred at all EIPs, and we strongly believe that EIPs are a strong alternative to traditional industrial complexes for reducing net carbon emissions. We also examined the optimal conditions for using accelerated mineral carbonation to dispose of hazardous fly ash produced through the incineration of municipal solid wastes at these EIPs. We determined that this technique most efficiently sequestered CO2 when micro-bubbling, low flow rate inlet gas, and ammonia additives were employed.     

制备工艺对La改性湿式氧化催化剂活性和稳定性的影响

采用CWAO(催化湿式空气氧化)法处理甲基橙模拟印染废水,以过量浸渍法制备催化剂,以水样COD Cr去除率和脱色率表征催化剂的活性,以催化剂使用后处理出水中溶出的金属离子质量浓度表征催化剂的稳定性.结果表明,多组分催化剂的金属组分构成为Cu、Fe、La,m(Cu)∶m(Fe)∶m(La)为1∶1∶2,35℃下动态共浸渍8 h,450℃下焙烧3 h,由此制备得到Cu-Fe-La/FSC催化剂.应用该催化剂,以CWAO法处理模拟印染废水,废水COD Cr去除率和脱色率可分别达到79.1%和98.9%,催化剂的活性较高;使用该催化剂处理后的废水中Cu、Fe、La、Al的溶出量(以ρ计)分别为6.1、2.4、2.2、3.2 mg/L,说明金属元素的溶出量较低,催化剂的稳定性较高.