两种膜生物反应器处理印染废水的对比试验研究

针对印染废水成分复杂、色度大、浓度高且生物难降解物质多等特点,采用了混凝沉淀法对印染废水进行预处理,而后分别采用新型海藻式膜生物反应器(MBR)和传统帘式膜生物反应器对印染废水进行活性污泥法处理试验研究。通过对化学需氧量(COD)、生化需氧量(BOD)、氨氮(NH3-N)、总氮(TN)、总磷(TP)、色度、浊度等水质指标连续进行测定、分析与处理,考察两种膜生物反应器对印染废水的降解效果,并观察系统运行情况和膜组件污染状况。试验结果表明:海藻式MBR对印染废水的处理效果良好,出水浊度低于0.3NTU,对COD、BOD、色度、氨氮、总氮的去除率分别可达90%、94%、91.4%、87.8%、86.4%。海藻式MBR在各项指标上均明显优于传统帘式MBR,且能够降低MBR膜丝根部的污染,清洗更方便、更有效。     

剩余污泥处理含铬(VI)废水研究

针对某城市污水处理厂剩余污泥,从pH值、吸附时间、污泥投加量、温度、铬(VI)浓度等方面研究了剩余污泥吸附剂对含铬(VI)废水的生物吸附性能.研究结果表明:废水的pH值是影响剩余污泥吸附铬(VI)的重要因素,适宜pH值为1.0～2.0;吸附是一个快速过程,适宜吸附时间为30 min;在pH值为1.0,污泥投加量为8g/L,30℃吸附30min,对50mg/L铬(VI)废水的去除率可达99.65%;在20～60℃污泥吸附不受温度影响;用Langmuir和Freundlich等温吸附模型描述了污泥对铬(VI)的吸附结果;通过扫描电子显微傲能谱仪(SEM/EDS)分析,吸附前后污泥的形貌变化不明显,元素含量发生变化.     

京西某村小窑采空区的稳定性分析

京西是北京地区的主要产煤区,地下有许多煤层采空区,是影响地表建筑物稳定的重大安全隐患.本文运用概率积分法,对京西某村小窑采空区的地表沉陷量及剩余变形量进了计算,并对小窑采空区的稳定性进行了分析和评价.     

SBR工艺在城市污水处理厂的应用

以SBR新工艺应用于抚顺市三宝屯污水处理厂为例,介绍了该工艺的主要性能特点、关键技术处理及工程设计思路,探讨了在实际应用中应关注的问题,并提出相应的措施。     

浮动填料生化法与活性污泥法比较研究

对沈阳市沈水湾污水处理厂的运行现状进行了概述,介绍了浮动填料生化法的工艺原理,通过对1号线浮动填料工艺和2号线活性污泥工艺运行参数的比较,表明浮动填料工艺在出水水质、抗冲击负荷等方面优于活性污泥法。     

磁效应对活性污泥法处理污水的作用机理及其应用

文章在总结国内外文献的基础上,对磁效应在活性污泥法工艺处理污水中的作用机理及应用进行了介绍和综述。总结出了应用磁效应能使活性污泥的结构得到改善,污泥的沉降性能、污泥中微生物活性及抗污染物冲击负荷能力都优于普通活性污泥。     

Combined alkaline and ultrasonic pretreatment of sludge before aerobic digestion

Alkaline and ultrasonic sludge disintegration can both be used as pretreatments of waste activated sludge (WAS) for improving the subsequent anaerobic or aerobic digestion. The pretreatment has been carried out using different combination of these two methods in this study. The effect was evaluated based on the quantity of soluble chemical oxygen demand (SCOD) in the pretreated sludge as well as the degradation of organic matter in the following aerobic digestion. For WAS samples with combined pretreatment, the released COD was in high level than those with ultrasonic or alkaline treatment. When combined with the same ultrasonic treatment, NaOH treatment resulted in more solubilization of WAS than Ca(OH)2. For combined NaOH and ultrasonic treatments with different sequences, the released COD were in the order: simultaneous treatment > ultrasonic treatment following NaOH treatment > NaOH treatment following ultrasonic treatment. For simultaneous treatment, low NaOH dosage (100 g/kg dry solid), short duration (30 min) of NaOH treatment, and low ultrasonic specific energy (7 500 kJ/kg dry solid) were beneficial for sludge disintegration. Using combined NaOH and ultrasonic pretreatment with the optimium parameters, the degradation efficiency of organic matter was increased from 38.0% to 50.7%, which is much higher than with ultrasonic (42.5%) or with NaOH pretreatment (43.5%) in the subsequent aerobic digestion at the same retention time.     

Organic matter extracted from activated sludge with ammonium hydroxide and its characterization

In order to characterize the organic properties of waste activated sludge in a wastewater treatment plant,organic matter within sludge was extracted with NH 3 ·H 2 O preferentially,and subsequently fractionated into five fractions using XAD-8/XAD-4 resins.Up to a 63.8%-71.1% of organic matter within the sludge could be efficiently extracted by NH 3 ·H 2 O.Fractionation results showed that hydrophobic acid and hydrophilic fraction were two main components among the sludge organic matter (accounting for 32.2% and 48.0% of the bulk organic matter,respectively),whereas transphilic acid,hydrophobic neutral and transphilic neutral were quite low (accounting for 9.2%,5.8% and 4.8%,respectively).Despite that the extractant of NH 3 ·H 2 O showed a relatively higher extraction efficiency of the aromatic components,the relatively low aromaticity of the organic fractions implied that those non-aromatic components could also be effectively extracted,especially for neutral and hydrophilic fractions.In addition,acidic fractions contained more aromatic humic-like components,whereas the neutral fractions had a greater content of aromatic proteins and soluble microbial byproduct-like components.Extraction of sludge organics with NH 3 ·H 2 O and subsequential fractionation using XAD resins could be a novel method for further characterization of sludge organics.     

A2/O工艺中好氧污泥絮体的分形结构与理化特征分析

采用图像法和沉降柱法分别研究了A²/O工艺中好氧污泥絮体的形貌、粒度分布、低维分形维数和沉降速率、有效密度、空隙率以及质量分形维数,并尝试探讨了上述相关性质与这些污泥宏观操作性质(沉降、压缩、脱水和稳定性)相关的各种理化指标以及胞外高分子物质(EPS)的含量之间的变化关系.结果表明,污泥絮体呈现不规则的形貌,表面具有空隙.其有效密度一般随着其粒径的增加而降低,而空隙率和沉降速率却呈现与有效密度相反的变化趋势,这些均表明了污泥絮体的分形结构的存在.2次所采集的污泥絮体的中位直径分别为248.81、 332.86 μm,有效密度的平均值分别为0.004 0、 0.007 2 g·cm^-3,自由沉降速率的平均值分别为2.67、 4.79　mm·s^-1,空隙率的平均值分别为0.94、 0.89,一维分形维数分别为1.03、 1.19,二维分形维数分别为1.64、 1.84,采用基于Logan经验公式的有效密度-最大直径的双对数关系确定的质量分形维数分别为1.74、 2.29.尽管第2次所采集的污泥絮体较为密实,但其表面粗糙程度却比第1次的低.此外,研究中发现絮凝能力较高或负电荷较高的A²/O好氧污泥絮体具有高的SVI和ZSV值;分形维数较低的污泥具有高的剪切敏感性和低絮体强度,相应的污泥稳定性低;EPS总量高的污泥脱水性能差,EPS中蛋白质含量高的污泥其表面电荷也较高.     

基于批式呼吸计量法的溶解性COD组分划分

利用批式好氧呼吸计量法结合溶解性慢速水解COD(S_H)水解动力学拟合提出了溶解性COD(SCOD)的组分划分方案.上海2个污水处理厂进水的SCOD组分划分结果表明,A厂沉砂池出水(典型生活污水)的SCOD中含有43.5%～58.6% S_H、 21.8%～35.2%易生物降解COD(S_S)和15.4%～30.9%溶解性惰性COD(S_I); B厂沉砂池出水(长距离输送的合流制污水)SCOD中含有34.5%～45.2% S_H、 29.3%～37.7% S_S和25.6%～31.2% S_I. 9组不同水样的试验拟合结果表明,一级动力学能够很好地描述S_H的水解过程,A厂和B厂进水S_H的水解速率常数分别为28.00～39.77 d^-1和26.48～29.52 d^-1.该组分划分方案能够实现S_S积分区域的理论划分,并消除溶解性微生物产物对S_I测定的影响.