六种有机物在亚/超临界水中氧化的反应动力学研究

为了给超临界水氧化设备工业化应用提供指导思路,本文设计制作了一套连续化的超临界水氧化仿工业化装置(压力为24MPa,H2O2过氧量倍数为3倍),选取甲基红、靛红、苯磺酸、对氨基苯磺酸、对二甲氨基苯甲醛、2,4-二硝基苯肼6种芳香烃化合物进行了从亚临界过渡到超临界状态下的水氧化试验,并以总有机碳(TOC)为表征研究了6种化合物的去除效果,以幂指数方程描述了6种化合物从亚临界到超临界的反应动力学参数。结果表明:6种有机物在亚临界至超临界点时间段内,反应物TOC的浓度随时间的变化呈现良好的线性下降趋势,且在亚临界状态下,足够的反应停留时间就能取得较好的TOC去除效果,而在超临界状态下,反应过程十分迅速,在较短的反应时间内也会取得较好的TOC去除效果,但随着反应时间的增加,在几分钟之内,TOC的去除率随时间的变化还是较为明显;6种有机物的反应活化能介于26.2～54.341kJ/mol之间,表明不同结构化合物SCWO反应的温度升高效应不同。     

Fenton氧化法处理有机污染物的降解规律探讨

为了预测新生或缺乏试验数据的含有机污染物废水的治理效果,本文通过试验对Fenton氧化法降解芳烃类、卤代物、杂环类等28种有机污染物的规律进行了研究。结果表明:在Fenton反应初始阶段,氧化反应剧烈,反应过程基本符合一级动力学方程,但随着时间的延长,反应趋于平缓;28种有机污染物色度平均去除率(Rcolor)为80.8±30.3%,TOC平均去除率(RTOC)为39.8±30.3%,约为色度平均去除率的0.44倍;以色度为表征的一级反应动力学常数(Kcolor)均大于对应的以TOC为表征的一级反应动力学常数(KTOC),且色度去除效率更高;Fenton氧化法对不同有机污染物的去除效果有显著差异,分子结构对称性强、水溶性较差的有机污染物如偶氮苯、蒽醌等的降解效果相对较差,而苯酚、苯胺等水溶性较好的有机污染物的降解效果相对较好,表明水溶性是影响有机污染物降解效果的重要因素。     

大气中臭氧行为研究进展

臭氧（O3）是一种重要的大气微量气体,是影响对流层——平流层大气动力、热力、辐射、化学等过程的关键成分,在气候和环境变化中扮演非常重要的角色。本文从臭氧在大气中的行为机理入手,研究影响臭氧源和汇的因子,了解臭氧含量变化机制,对当前臭氧研究热点进行概括和总结,展望未来研究重要问题。     

超临界反应的应用

采用环境友好的溶剂在超临界状态下进行的化学反应,能加快化学反应速率,提高反应的产率和选择性,方便地实现反应分离过程的一体化,该技术以其独特的优越性获得了广泛研究与关注。笔者简述了近年来超临界反应在石油化工、环境保护、生物柴油制备领域的应用。     

光氧化反应脱汞技术发展综述

燃煤电厂烟气中汞污染的控制技术研究是目前重要的环保课题之一。气相元素汞成为大气中汞污染的主要来源。文章分析了光氧化反应脱汞技术(包括光化学氧化反应和光催化氧化反应)的反应机理,认为光化学氧化反应技术脱汞均是在紫外光作用下,产生具有强氧化性的基态原子或自由基,将难以脱除的Hg0氧化为高价汞,再通过配套的电除尘器等设备将高价汞捕集,进而达到汞污染控制的目的。不同的是,在光化学氧化反应中,汞的氧化需要借助于电厂烟气中的O2、H2O等成分,而在光催化氧化反应中,反应需要在光催化剂(TiO2或TiO2负载复合物等)的催化作用下进行。阐述了光氧化反应汞脱除技术研究进展。光氧化反应脱汞技术的汞脱除率均可达到60%~70%,具备设备简单、无二次污染等优点。     

Kinetics of selective catalytic reduction of NO by NH3 on Fe-Mo/ZSM-5 catalyst

The catalyst of Fe-Mo/ZSM-5 has been found to be more active than Fe-ZSM-5 and Mo/ZSM-5 separately for selective catalytic reduction (SCR) of nitric oxide (NO) with NH3. The kinetics of the SCR reaction in the presence of O2 was studied in this work. The results show that the observed reaction orders were 0.74-0.99, 0.01-0.13, and 0 for NO, O2 and NH3, respectively, at 350-450℃. And the apparent activation energy of the SCR was 65 kJ/mol on the Fe-Mo/ZSM-5 catalyst. The SCR mechanism was also deduced. Adsorbed NO species can react directly with adsorbed ammonia species on the active sites to form N2 and H2O. Gaseous O2 might serve as a reoxidizing agent for the active sites that have undergone reduction in the SCR process. It is also important to note that a certain amount of NO was decomposed directly over the Fe-Mo/ZSM-5 catalyst in the absence of NH3.     

荷电超滤膜对天然有机物去除及膜污染行为的影响

以Aldrich 腐殖酸溶液为水样,研究比较了溶液环境(pH值、离子强度和钙离子)对荷电改性再生纤维素超滤膜和传统中性未改性再生纤维素超滤膜过滤过程的影响.结果表明, ①pH值主要通过质子化作用影响荷电膜以及腐殖酸分子的荷电量,进而影响荷电超滤过程.溶液pH值从7.5下降到3.5时,荷电超滤膜对腐殖酸的截留率从92%减少到79%,超滤4 h时,膜通量下降从26%增加到36%.②离子强度的改变是通过影响腐殖酸分子的物化性质和静电屏蔽作用来影响超滤过程的.当溶液离子强度为0、 3和100 mmol/L时,初始截留率依次降低,分别为92%、 87%和48%,超滤4 h时,荷电超滤膜的通量下降依次增加,分别为26%、 35%和63%.③Ca2+浓度的影响,需要综合考虑静电屏蔽作用、Ca2+的架桥作用以及滤饼层的压实性等各方面的影响.④pH值、离子强度和钙离子对中性超滤膜过滤行为的影响趋势与荷电超滤膜相似,但其影响程度有着较大的差别.研究结果对荷电超滤膜技术在实际应用中选择合适环境条件提供了参考.     

Factors affecting the direct mineralization of CO2 with olivine

Olivine, one of the most abundant minerals existing in nature, is explored as a CO2 carbonation agent for direct carbonation of CO2 in flue gas. Olivine based CO2 capture is thermodynamically favorable and can form a stable carbonate for long-term storage. Experimental results have shown that water vapor plays an important role in improving CO2 carbonation rate and capacities. Other operation conditions including reaction temperature, initial CO2 concentration, residence time corresponding to the flow rate of CO2 gas stream, and water vapor concentration also considerably affect the performance of the technology.     

Removal of heavy metal ions from aqueous solution using red loess as an adsorbent

The adsorption behaviors of heavy metals onto novel low-cost adsorbent, red loess, were investigated. Red loess was characterized by X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectra. The results indicated that red loess mainly consisted of silicate, ferric and aluminum oxides. Solution pH, adsorbent dosage, initial metal concentration, contact time and temperature significantly influenced the efficiency of heavy metals removal. The adsorption reached equilibrium at 4 hr, and the experimental equilibrium data were fitted to Langmuir monolayer adsorption model. The adsorption of Cu(II) and Zn(II) onto red loess was endothermic, while the adsorption of Pb(II) was exothermic. The maximum adsorption capacities of red loess for Pb(II), Cu(II) and Zn(II) were estimated to be 113.6, 34.2 and 17.5 mg/g, respectively at 25°C and pH 6. The maximum removal efficiencies were 100% for Pb(II) at pH 7, 100% for Cu(II) at pH 8, and 80% for Zn(II) at pH 8. The used adsorbents were readily regenerated using dilute HC1 solution, indicating that red loess has a high reusability. All the above results demonstrated that red loess could be used as a possible alternative low-cost adsorbent for the removal of heavy metals from aqueous solution.     

Chemical cleaning of fouled PVC membrane during ultrafiltration of algal-rich water

Cleaning of hollow-fibre polyvinyl chloride (PVC) membrane with di erent chemical reagents after ultrafiltration of algal-rich water was investigated. Among the tested cleaning reagents (NaOH, HCl, EDTA, and NaClO), 100 mg/L NaClO exhibited the best performance (88.4% 1.1%) in removing the irreversible fouling resistance. This might be attributed to the fact that NaClO could eliminate almost all the major foulants such as carbohydrate-like and protein-like materials on the membrane surface, as confirmed by Fourier transform infrared spectroscopy analysis. However, negligible irreversible resistance (1.5% 1.0%) was obtained when the membrane was cleaning by 500 mg/L NaOH for 1.0 hr, although the NaOH solution could also desorb a portion of the major foulants from the fouled PVC membrane. Scanning electronic microscopy and atomic force microscopy analyses demonstrated that 500 mg/L NaOH could change the structure of the residual foulants on the membrane, making them more tightly attached to the membrane surface. This phenomenon might be responsible for the negligible membrane permeability restoration after NaOH cleaning. On the other hand, the microscopic analyses reflected that NaClO could e ectively remove the foulants accumulated on the membrane surface.