废弃产品回收处理企业环境绩效评价初探

近年来,废弃产品回收处理行业日益受到政府和社会各界的关注,而回收处理企业是实施回收处理活动的主体,相关法律、法规的出台对回收处理企业提出了更高的要求。本文在概括梳理相关法律、法规的基础上,初步建立了废弃产品回收处理企业环境绩效评价指标体系,为回收处理企业采用先进的技术工艺、降低环境负荷、加强职业健康监护和企业环境管理提供参考,以适应国家政策要求和行业发展的需要。     

UAFB-缺氧-好氧MBR组合工艺处理生活污水效能研究

为了同时达到从生活污水中回收能源性气体和深度处理生活污水的目的,试验采用升流式厌氧污泥固定床(up-flowanaerobic fixed bed,UAFB)-缺氧-好氧膜生物反应(membrane bioreactor,MBR)组合工艺处理生活污水.试验重点研究了组合工艺对生活污水的处理效能,包括能源性气体的产生效能、对污染物质的处理效能以及对污泥浓度的控制.UAFB-缺氧-好氧MBR组合工艺在温度20℃、厌氧HRT为3 h、缺氧HRT为3 h、好氧HRT为3.5 h的条件下运行,甲烷气体的产生量为1.55L/d,COD去除率为93.28%,NH 4+-N去除率为90.60%,UAFB出水VFAs总量54.74 mg/L,TN去除率为45.51%.试验发现,组合工艺可以长期维持反应器内较低的污泥浓度,大大减小了剩余污泥的处理量,在一定程度上实现了污泥减量化,同时较低的污泥浓度有利于缓解膜污染.     

浅析电子废弃物回收利用及危害解决办法

随着高科技的发展和人们需求的增长,电子产品不断推陈出新,电子废弃物成为世界上数量增长最快的垃圾."电子垃圾",主要包括各种使用后废弃的电脑、通信设备、电视机、电冰箱、洗衣机等电子电器产品.电子废弃物不规范回收处理易造成污染.电子废弃物中含有很多可回收再利用的有色金属、黑色金属、玻璃等物质.严格意义上讲,这些电子废弃物,不应称其为电子垃圾,而应称作电子旧货.伴随着电子工业的高速发展,电子废弃物污染不可避免地摆在了我们面前.电子废弃物具有危害性和可利用性.     

吸附法油气回收装置中真空泵的安装与调试

简要介绍了济南分公司油气回收装置、真空泵的工作原理以及安装与调试应注意的问题.     

荷电超滤膜对天然有机物去除及膜污染行为的影响

以Aldrich 腐殖酸溶液为水样,研究比较了溶液环境(pH值、离子强度和钙离子)对荷电改性再生纤维素超滤膜和传统中性未改性再生纤维素超滤膜过滤过程的影响.结果表明, ①pH值主要通过质子化作用影响荷电膜以及腐殖酸分子的荷电量,进而影响荷电超滤过程.溶液pH值从7.5下降到3.5时,荷电超滤膜对腐殖酸的截留率从92%减少到79%,超滤4 h时,膜通量下降从26%增加到36%.②离子强度的改变是通过影响腐殖酸分子的物化性质和静电屏蔽作用来影响超滤过程的.当溶液离子强度为0、 3和100 mmol/L时,初始截留率依次降低,分别为92%、 87%和48%,超滤4 h时,荷电超滤膜的通量下降依次增加,分别为26%、 35%和63%.③Ca2+浓度的影响,需要综合考虑静电屏蔽作用、Ca2+的架桥作用以及滤饼层的压实性等各方面的影响.④pH值、离子强度和钙离子对中性超滤膜过滤行为的影响趋势与荷电超滤膜相似,但其影响程度有着较大的差别.研究结果对荷电超滤膜技术在实际应用中选择合适环境条件提供了参考.     

像打击“地沟油”一样打击“废机油”

无独有偶,“地沟油折人寿”的新闻刚淡出视线,“废机油折车寿”的怪事又出现了。各地查处的“地沟油”事件表明,人人都可能成为“地沟油”的受害者,同样,无论是公车还是私家车也都有可能为“废机油”所伤。调查发现,被划为有毒废弃物、严令禁止无资质商户回收处理的废机油,已形成一个巨大的地下交易链。通过非法回收的黑市“中转”,很多废机油流入城市及周边的小炼油厂,被再次提炼成燃料油、“翻新”机油,而相当一部分翻新机油,又被装入新的名牌包装桶,新桶装劣油,再流回市场。     

Removal of heavy metal ions from aqueous solution using red loess as an adsorbent

The adsorption behaviors of heavy metals onto novel low-cost adsorbent, red loess, were investigated. Red loess was characterized by X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectra. The results indicated that red loess mainly consisted of silicate, ferric and aluminum oxides. Solution pH, adsorbent dosage, initial metal concentration, contact time and temperature significantly influenced the efficiency of heavy metals removal. The adsorption reached equilibrium at 4 hr, and the experimental equilibrium data were fitted to Langmuir monolayer adsorption model. The adsorption of Cu(II) and Zn(II) onto red loess was endothermic, while the adsorption of Pb(II) was exothermic. The maximum adsorption capacities of red loess for Pb(II), Cu(II) and Zn(II) were estimated to be 113.6, 34.2 and 17.5 mg/g, respectively at 25°C and pH 6. The maximum removal efficiencies were 100% for Pb(II) at pH 7, 100% for Cu(II) at pH 8, and 80% for Zn(II) at pH 8. The used adsorbents were readily regenerated using dilute HC1 solution, indicating that red loess has a high reusability. All the above results demonstrated that red loess could be used as a possible alternative low-cost adsorbent for the removal of heavy metals from aqueous solution.     

Chemical cleaning of fouled PVC membrane during ultrafiltration of algal-rich water

Cleaning of hollow-fibre polyvinyl chloride (PVC) membrane with di erent chemical reagents after ultrafiltration of algal-rich water was investigated. Among the tested cleaning reagents (NaOH, HCl, EDTA, and NaClO), 100 mg/L NaClO exhibited the best performance (88.4% 1.1%) in removing the irreversible fouling resistance. This might be attributed to the fact that NaClO could eliminate almost all the major foulants such as carbohydrate-like and protein-like materials on the membrane surface, as confirmed by Fourier transform infrared spectroscopy analysis. However, negligible irreversible resistance (1.5% 1.0%) was obtained when the membrane was cleaning by 500 mg/L NaOH for 1.0 hr, although the NaOH solution could also desorb a portion of the major foulants from the fouled PVC membrane. Scanning electronic microscopy and atomic force microscopy analyses demonstrated that 500 mg/L NaOH could change the structure of the residual foulants on the membrane, making them more tightly attached to the membrane surface. This phenomenon might be responsible for the negligible membrane permeability restoration after NaOH cleaning. On the other hand, the microscopic analyses reflected that NaClO could e ectively remove the foulants accumulated on the membrane surface.     

诱导结晶磷回收技术处理低浓度含磷废水研究

诱导结晶技术是近年发展的新型废水处理技术。采用自设计的诱导结晶反应器,反应器形式与Phosnix相似,但结构相对简单,无Phosnix反应器的内外同心筒结构,并增加了过渡区。研究了HRT、[PO43-]、[Ca2+]/[PO43-]对诱导结晶处理低浓度含磷废水的影响规律,并以实验室双泥系统厌氧上清液为原水,考察了结晶反应器长期运行效果。研究表明,在一定范围增加HRT、[PO43-]或[Ca2+]/[PO43-]均可提高磷酸盐去除率,但超过一定数值后,再继续增加对提高磷酸盐去除效果的贡献很小,[PO43-]或[Ca2+]/[PO43-]过高还会导致均相结晶出现,使磷酸盐去除率下降;研究给出了一定条件下的最佳HRT、[PO43-]或[Ca2+]/[PO43-];运行效果试验表明,诱导结晶反应器在进水平均磷酸盐浓度仅为23.6 mg/L的情况下,磷酸盐的平均去除率仍可达到55.2%,该技术在处理低浓度含磷水方面较具应用前景。     

澄海区造纸行业水污染整治的看法

造纸废水的回收利用对节约水资源和减少废水排放有重要作用。澄海区开展造纸行业整治,本文就水污染整治措施部分从工艺、技术和排污经济损益方面进行分析探讨。