TiO2 nanotubes as solid-phase extraction adsorbent for the determination of polycyclic aromatic hydrocarbons in environmental water samples

An analytical method based on TiO2 nanotubes solid-phase extraction (SPE) combined with gas chromatography (GC) was established for the analysis of seven polycyclic aromatic hydrocarbons (PAHs): acenaphtylene, acenaphthene, anthracene, fluorene, phenanthrene, fluoranthene and pyrene. Factors a ecting the extraction e ciency including the eluent type and its volume, adsorbent amount, sample volume, sample pH and sample flow rate were optimized. The characteristic data of analytical performance were determined to investigate the sensitivity and precision of the method. Under the optimized extraction conditions, the method showed good linearity in the range of 0.01–0.8 g/mL, repeatability of the extraction (RSD were between 6.7% and 13.5%, n = 5) and satisfactory detection limits (0.017–0.059 ng/mL). The developed method was successfully applied to the analysis of surface water (tap, river and dam) samples. The recoveries of PAHs spiked in environmental water samples ranged from 90% to 100%. All the results indicated the potential application of titanate nanotubes as solid-phase extraction adsorbents to pre-treat water samples.     

废弃线路板热解油中酚类物质的提取与分离

将FR-4型废弃线路板热解,并对热解油中含量最多的组分-酚类物质进行分离提取.比较研究线路板热解油的分离提取方法,探索出"碱液处理-酸化-萃取-减压蒸馏"的新方法,对分离出的组分进行GCMS(气质联用)测试.结果显示运用该方法对FR-4型线路板的热解油进行提取分离,得到的总酚占热解油的62.0%,其中苯酚的最高纯度可达...     

稀土磁盘水处理方案技术经济比较

文章针对日照钢铁集团公司2150热轧水处理工程浊环水处理方案选择,对传统沉淀过滤法和先进的稀土磁盘法进行了对比和分析,稀土磁盘法在效果、占地、投资和运行维护费用上有较多优势,最终选用该工艺。     

含固率和接种比对叶菜类蔬菜垃圾厌氧消化的影响

通过叶菜类蔬菜垃圾中温批式厌氧消化实验,比较了含固率(3%、5%、7%)和接种比(1.5、2.5、3.5)对产甲烷效果的联合影响.结果表明,在研究实验参数范围内,含固率越低、接种比越高,越有利于缩短产甲烷反应迟滞期,平均日产甲烷速率越快.经过52d的培养,在含固率为3%、接种比为3.5的工况中,平均日产甲烷速率最快,达到9.5mL/(gVS·d),日最大产甲烷速率最快,达到49.8mL/(gVS·d),最早进入快速产甲烷期.当接种比为3.5时,随着含固率的升高,产甲烷速率下降,迟滞期延长,但单位底物累计产甲烷量增大,含固率7%时单位底物累计净产甲烷量为481mL/gVS.而当接种比为1.5时,含固率为5%和7%的工况均无法启动甲烷化反应,含固率为3%的工况的产气迟滞期达15d.挥发性有机酸的累积抑制甲烷化反应的启动,迟滞期随着液相中有机酸浓度的增加而延长,当有机酸浓度低于1260mg/L,甲烷化反应没有明显的迟滞期.     

Potential bioremediation of mercury-contaminated substrate using filamentous fungi isolated from forest soil

The use of filamentous fungi in bioremediation of heavy metal contamination has been developed recently. This research aims to observe the capability of filamentous fungi isolated from forest soil for bioremediation of mercury contamination in a substrate. Six fungal strains were selected based on their capability to grow in 25 mg/L Hg2+-contaminated potato dextrose agar plates. Fungal strain KRP1 showed the highest ratio of growth diameter, 0.831, thus was chosen for further observation.Identification based on colony and cell morphology carried out by 18S rRNA analysis gave a 98%match to Aspergillus flavus strain KRP1. The fungal characteristics in mercury(Ⅱ) contamination such as range of optimum pH, optimum temperature and tolerance level were 5.5–7 and 25–35℃ and 100 mg/L respectively. The concentration of mercury in the media affected fungal growth during lag phases. The capability of the fungal strain to remove the mercury(Ⅱ) contaminant was evaluated in 100 mL sterile 10 mg/L Hg2+-contaminated potato dextrose broth media in 250 mL Erlenmeyer flasks inoculated with 108spore/mL fungal spore suspension and incubation at 30℃ for 7 days. The mercury(Ⅱ) utilization was observed for flasks shaken in a 130 r/min orbital shaker(shaken) and nonshaken flasks(static) treatments. Flasks containing contaminated media with no fungal spores were also provided as control. All treatments were done in triplicate. The strain was able to remove 97.50%and 98.73% mercury from shaken and static systems respectively. A. flavus strain KRP1 seems to have potential use in bioremediation of aqueous substrates containing mercury(Ⅱ) through a biosorption mechanism.     

硅胶表面壬基酚印迹材料的制备及其固相萃取应用

采用表面分子印迹技术,以壬基酚为模板分子,4-乙烯吡啶为功能单体,乙二醇二甲基丙烯酸酯为交联剂,通过溶胶凝胶法在无定型硅胶表面合成了壬基酚分子印迹聚合物。通过扫描电镜和红外光谱表征证明成功在硅胶表面合成了表面印迹聚合物。对印迹聚合物吸附性能考察的结果表明,该印迹聚合物对壬基酚仅15 min左右达到吸附平衡,去除率达75.13%,具有明显的快速吸附性和良好的选择吸附性。与C18柱相比,该分子印迹聚合物为填料的固相萃取柱对纺织品中的壬基酚具有显著的选择性分离和富集的能力,对壬基酚的加标回收率为86.4%~95.3%,相对标准偏差为2.8%~4.9%,表现出较高的回收率和准确性。     

环境样品中甲基汞测定方法的研究进展

甲基汞可通过血脑屏障引起中枢神经系统永久性损伤,毒性很强,因此环境样品中甲基汞的准确测定具有重要意义。文章对近年来环境样品中甲基汞的提取与富集技术及分析测定方法进行了归纳和总结。系统介绍了酸/碱提取、微波/超声辅助提取等样品前处理方法及其溶剂萃取等富集方法。通过比较分析,总结了不同环境样品适用的前处理方法。同时,对各色谱-质谱/光谱联用方法在甲基汞测定时的应用进行了归纳和比较。全自动形态汞/总汞分析仪(MERX)将环境样品中甲基汞的富集与分析有机结合,实现了环境样品中甲基汞的富集和分离与定量分析的一体化,提高了分析效率,是值得推荐的方法。     

专利资讯

正专利名称:铝塑分离再生利用系统专利申请号:CN201220363682.9公开号:CN202700829U申请日:2012.07.25公开日:2013.01.30申请人:安徽华翼金属集团有限公司一种铝塑分离再生利用系统,涉及铝塑分离技术领域,系统按工艺步骤依次包括破碎机、磨粉机组、除尘装置、物料提升机和铝塑静电分离机组,所述破碎机与磨粉机组之间设置有螺旋上料装置,磨粉机组与除尘装置之间通过管道密闭     

汽车报废破碎 资源回收率须9成

正根据商务部要求,由中国汽车技术研究中心组织起草的《报废汽车破碎技术规范》行业标准征求意见稿近日公布并公开征求意见,意见反馈截止日期为2014年5月30日。拟定中的技术规范提出,汽车报废破碎分选后,可再生资源综合回收率将不低于90%。今后,汽车报废破碎厂区不应位于饮用水源保护区、基本农田保护区或其他需要特别保护的区域,作业场地面积不低于20 000 m2,并配备收集污水的排水沟、油水分离等污水处理装置。通过设备分选或人     

规模化养牛场牛粪污综合利用研究

利用牛粪生产沼气,并将副产物有效利用是处理牛粪污的有效途径,为提高牛粪厌氧发酵的产气效率和副产物的利用率,整体工艺采用牛粪发酵前固液分离,固体进行好氧发酵回填牛卧床,分离液进行厌氧-好氧发酵,厌氧发酵产生沼气为系统增温,最后液体通过人工湿地处理达标排放。结果表明:对牛粪进行发酵前固液分离,降低了物料的粘度,利于微生物的传质,可以取得较好的产气效果,沼气通过沼气燃烧炉转化为热能为系统增温降低了其他能源的供给,同时湿地的利用也有效地改善了养牛场周边环境,为牛粪污生产沼气工程提供新思路。