利用PUF被动采样技术监测珠江三角洲地区大气中多氯联苯分布

研究了珠江三角洲地区大气中多氯联苯的含量与分布.利用大气被动采样装置,共设立了包括香港在内的珠江三角洲21个大气被动采样点,样品采样时间为2005-08-15～2005-10-14.结果表明,珠三角内地的佛山(2000pg·m-3)是PCBs的高污染地区,内地采样点PCBs含量范围260～2000pg·m-3,平均值670pg·m-3.香港PCBs含量范围170～470pg·m-3,平均值300pg·m-3.香港每个采样点的PCBs含量都接近平均值,含量比较低.珠三角大气中PCBs含量与世界其它地区相比属中度污染区域.结果也表明,PUF大气被动采样器可很好地运用于区域大气PCBs污染分布与特征的对比研究.     

临安区域大气本底站CO_2浓度特征及其碳源汇变化研究

通过分析2006年8月～2009年7月临安区域大气本底站Flask瓶采样获得的CO2浓度特征,结合碳追踪模式的模拟结果,研究了长三角地区碳源汇变化对CO2浓度的影响.结果表明,临安区域大气本底站的CO2浓度分布在368.3×10-6～414.8×10-6之间,具有较明显的季节波动变化特征,冬季高、夏季低,浓度年较差接近...     

荧光桃红-溴化十六烷基三甲基铵检测有机磷农药残留总量

在pH为6.40的B-R缓冲溶液中,荧光桃红与一定浓度的溴化十六烷基三甲基胺发生荧光增强反应,加入有机磷农药后,体系的荧光强度降低,且降低程度与有机磷农药的加入量呈良好的线性关系,建立了用此荧光法来测定有机磷农药残留总量的新方法.在优化试验条件下,线性范围为0.008-0.72 mg·L-1,检出限为0.05 mg·L...     

春季黄渤海大气气溶胶的离子特征与来源分析

于2010年春季在黄海、渤海海域采集大气气溶胶总悬浮颗粒物（TSP）样品,并运用离子色谱法对其中主要的水溶性阴离子（Cl-、NO3-、SO24-、CH3SO3-（MSA））和阳离子（Na＋、K＋、NH4＋、Mg2＋、Ca2＋）浓度进行了测定.分析结果显示,黄海、渤海气溶胶样品中主要水溶性离子总浓度分别为10.2～47....     

广东省荔枝园土壤农药残留现状研究

荔枝收获完毕后在广东省荔枝主产区采集208个荔枝园土壤样本,检测了9种荔枝常用农药甲霜灵、代森锰锌、多菌灵、溴氰菊酯、氯氰菊酯、三氟氯氰菊酯、敌百虫、乐果和敌敌畏的残留含量.结果表明,农药检出率为氯氰菊酯(59.1%)多菌灵(51.0%)代森锰锌(11.1%)甲霜灵(6.7%)三氟氯氰菊酯(3.4%).乐果和敌敌畏仅在个别果园检出,溴氰菊酯和敌百虫均未检出.土壤同时检出不同种类农药果园的百分数为只检出1种农药(40.4%)同时检出2种(31.3%)未检出(18.8%)同时检出3种(8.2%)同时检出4种(1.4%).检出的7种农药中,代森锰锌残留平均含量最高达39.05μg·kg-1,氯氰菊酯次之为7.83μg·kg-1.其它5种农药平均含量为0.19～1.65μg·kg-1.整体上广东省荔枝园土壤农药残留状况较轻.     

焦作市高新区冬季大气不同粒径颗粒物质量特征分析

用大流量冲击式分级采样器采集大气颗粒物样品,通过重量法求出不同粒径颗粒物的质量,研究不同粒径颗粒物的质量百分比.分析不同粒径颗粒物与风速、温度、湿度等气象条件的变化规律.结果表明:各级颗粒物整体与温度和风速呈负相关性,与湿度呈正相关性,且粒径小于2.1 μm的颗粒物与湿度相关性最大.大气颗粒物主要集中在2.1 μm以下...     

戊唑醇残留分析方法实验室内质量控制研究

文章确立了小麦、香蕉中戊唑醇残留检测方法,小麦样品加水10 mL用丙酮为萃取溶剂,石油醚液液分配,中性氧化铝柱层析净化,用气相色谱(GC-NPD)检测。香蕉样品加水5 mL用丙酮为萃取溶剂,石油醚液液分配,浓缩后用气相色谱(GC-NPD)检测。分别设置不同时间批次,同一批次间的平行样及实验室内人员分析,分别从方法灵敏度、方法准确度、方法精密度及其质量控制图、标准工作液的稳定性来探讨该方法的可靠性,结果表明该方法可以作为香蕉和小麦种戊唑醇残留检测的标准分析方法。     

环境监测与可持续发展的关系

在落实可持续发展战略的过程中,对环境的保护对农业生产健康的发展、资源的合理开发与利用、当地的经济发展质量、物种的多样性、人类的生存环境、尤其是对经济的可持续发展起着极其重要的促进作用。环境监测可以为管理部门和决策部门最大限度的提供实时的环境状态、污染程度、污染物的分布、环境状况及污染的变化趋势、突发污染事件的范围和危害程度等关键信息。本文将阐述大气监测、海洋监测、交发性污染事件的处理的特点及与与可持续发展的关系。     

Biostability in distribution systems in one city in southern China：Characteristics, modeling and control strategy

This study investigated the bacterial regrowth in drinking water distribution systems receiving finished water from an advanced drinking water treatment plant in one city in southem China. Thirteen nodes in two water supply zones with different aged pipelines were selected to monitor water temperature, dissolved oxygen （DO）, chloramine residual, assimilable organic carbon （AOC）, and heterotrophic plate counts （HPC）. Regression and principal component analyses indicated that HPC had a strong correlation with chloramine residual. Based on Chick-Watson＇s Law and the Monod equation, biostability curves under different conditions were developed to achieve the goal of HPC 100 CFU/mL. The biostability curves could interpret the scenario under various AOC concentrations and predict the required chloramine residual concentration under the condition of high AOC level. The simulation was also carded out to predict the scenario with a stricter HPC goal （≤50 CFU/mL） and determine the required chloramine residual. The biological regrowth control strategy was assessed using biostability curve analysis. The results indicated that maintaining high chloramine residual concentration was the most practical way to achieve the goal of HPC ≤ 100 CFU/mL. Biostability curves could be a very useful tool for biostability control in distribution systems. This work could provide some new insights towards biostability control in real distribution systems.     

Reduction and characterization of bioaerosols in a wastewater treatment station via ventilation

Bioaerosols from wastewater treatment processes are a significant subgroup of atmospheric aerosols. In the present study,airborne microorganisms generated from a wastewater treatment station(WWTS) that uses an oxidation ditch process were diminished by ventilation.Conventional sampling and detection methods combined with cloning/sequencing techniques were applied to determine the groups,concentrations,size distributions,and species diversity of airborne microorganisms before and after ventilation. There were 3021 ± 537 CFU/m3 of airborne bacteria and 926 ± 132 CFU/m3 of airborne fungi present in the WWTS bioaerosol.Results showed that the ventilation reduced airborne microorganisms significantly compared to the air in the WWTS. Over 60% of airborne bacteria and airborne fungi could be reduced after4 hr of air exchange. The highest removal(92.1% for airborne bacteria and 89.1% for fungi) was achieved for 0.65–1.1 μm sized particles. The bioaerosol particles over 4.7 μm were also reduced effectively. Large particles tended to be lost by gravitational settling and small particles were generally carried away,which led to the relatively easy reduction of bioaerosol particles0.65–1.1 μm and over 4.7 μm in size. An obvious variation occurred in the structure of the bacterial communities when ventilation was applied to control the airborne microorganisms in enclosed spaces.