鼓风机叶轮快速断裂的检测及失效分析

针对焦化厂鼓风机叶轮运行近15 d后产生穿透性裂纹、并延伸至叶轮半径2/3处的严重断裂事故,采用具有早期缺陷诊断功能的金属磁记忆新技术及其他多种手段,从宏观力学及微观机理角度对其进行综合性能评定及失效分析.研究结果表明,叶轮材料强度、韧性均过低,且韧性指标分散性大、同类型试样的韧性指标最大值与最小值之间相差3倍多;金相组织晶粒粗大,断口表现为脆性开裂.沿叶轮的断裂与非断裂面分别进行磁记忆扫描,磁场强度分析表明,断裂面内存在两处具有明显应力集中的危险源.分析表明,锻造及锻后热处理不良造成了快速疲劳断裂.最后,结合5年中3次叶轮断裂事故,对失效原因进行了相关性分析.     

加油站油气回收系统分析与关键技术研究

深入分析了加油站平衡式油气回收系统、真空泵辅助式油气回收系统的美国模式和德国模式的油气回收效率和关键技术问题,揭示了密封性是平衡式失败和美国模式低效的根本原因,解决了困扰业界的罐压不高、罐压保持、后处理装置是否必要等困惑和争议,提出高效率、低密封性要求的"低罐压真空泵辅助式油气回收系统"技术方案和实施方案。     

加压气浮法处理含油废水中溶气压力对出水水质的影响与应用研究

以实际工作中的含油废水为研究对象,采用加压气浮处理工艺,通过多年的实际应用与对监测数据的分析,总结出气浮压力对气浮处理效果的影响,通过对溶气罐压力的调整,可得到最佳的出水水质。该项研究结果操作方便、处理效率高、易于控制、对今后的工作具有指导意义,有很好的推广价值。     

基于生态系统的水环境压力分区指标体系构建

为了科学合理的完成水环境压力分区,构建水环境压力分区指标体系是其关键和基础.鉴于水环境压力涉及因素的系统性.相互联系性,从生态系统的角度考虑选取水环境压力分区指标十分必要;由于水环境压力涉及方面的相互联系性,其表征指标之间往往存在信息量的重叠,为了避免信息的重复表达,减少不必要的工作量,同时避免冗余指标带来的干扰,需对...     

Review on water leakage control in distribution networks and the associated environmental benefits

Water supply is the primary element of an urban system. Due to rapid urbanization and water scarcity, maintaining a stable and safe water supply has become a challenge to many cities, whereas a large amount of water is lost from the pipes of distribution systems. Water leakage is not only a waste of water resources, but also incurs great socio-economic costs. This article presents a comprehensive review on the potential water leakage control approaches and specifically discusses the benefits of each to environmental conservation. It is concluded that water leakage could be further reduced by improving leakage detection capability through a combination of predictive modeling and monitoring instruments, optimizing pipe maintenance strategy, and developing an instant pressure regulation system. The environment could benefit from these actions because of water savings and the reduction of energy consumption as well as greenhouse gas emissions.     

Aerobic granules cultivated and operated in continuous-flow bioreactor under particle-size selective pressure

A novel method based on the selective pressure of particle size （particle-size cultivation method, PSCM） was developed for the cultivation and operation of aerobic granular sludge in a continuous-flow reactor, and compared with the conventional method based on the selective pressure of settling velocity （settling-velocity cultivation method, SVCM）. Results indicated that aerobic granules could be cultivated in continuous operation mode by this developed method within 14 days. Although in the granulation process, under particle-size selective pressure, mixed liquor suspended solids （MLSS） in the reactor fluctuated greatly and filamentous bacteria dominated the sludge system during the initial operation days, no obvious difference in profile was found between the aerobic granules cultivated by PSCM and SVCM. Moreover, aerobic granules cultivated by PSCM presented larger diameter, lower water content and higher specific rates of nitrification, denitrifieation and phosphorus removal, but lower settling velocity. Under long term operation of more than 30 days, aerobic granules in the continuous-flow reactor could remain stable and obtain good chemical oxygen demand （COD）, NH4^＋-N, total nitrogen （TN） and total phosphorus （TP） removal. The results indicate that PSCM was dependent on the cultivation and maintenance of the stability of aerobic granules in continuous-flow bioreactors.     

怎样变信息为企业治污压力

污染控制的障碍到底是什么？这不只是一个技术问题或者资金问题．最核心的问题还是缺乏动力。这个动力原本应该源自严格的执法。源自司法介入的环境诉讼,但是我国现在还不具备这些。从国际经验看,环境保护需要广泛的社会参与,除了政府监管,包括立法、司法、环保行政部门的作为．还有市场手段和公众参与。在西方国家,司法手段可以起到非常重要的作用。而我国环境司法系统还需要进一步完善,这会是一个相当艰难和漫长的过程。     

失效催化剂的问题有多大？

四川大学化学学院教授、催化材料研究所所长陈耀强指出．汽车行驶10万公里以后,催化剂逐渐失去作用。而中国车主没有更换尾气净化催化剂的习惯。政府也没有强制措施,导致大量催化剂失效的车辆仍在行驶．加剧了机动车排放污染。     

江苏省环境胁迫压力变化趋势研究

环境胁迫压力已成为环境保护部门值得关注的焦点,文章利用1991-2010年江苏省主要人文社会、工业、生活污染物排放数据和社会经济指标等数据,选择有代表性的指标,构建了江苏省环境胁迫压力评估指标体系,采用定量分析方法计算了环境胁迫压力综合指数。结果表明,1991-2010年,江苏省环境胁迫压力总体呈显著上升趋势,2010年仍处于重度压力状态。     

压力强化混凝除藻工艺中藻毒素安全性研究

为了研究预压力强化混凝沉淀蓝藻水处理工艺中,外加压力是否会引起藻细胞破裂,导致细胞内藻毒素泄漏到水体中,影响供水安全,实验对比研究了预压力和预氧化含藻水后藻毒素浓度的变化,以及预压力混凝沉淀和预氧化混凝沉淀除藻工艺中藻毒素浓度的变化和藻类去除效果.结果表明,含藻水经0.4~0.8 MPa压力加压后,水中藻毒素浓度没有增加,而次氯酸钠预氧化后水中藻毒素浓度大幅度增加.在0.5~0.8 MPa压力范围内,加压后混凝沉淀取得了较好的除藻除浊效果,蓝藻去除率达到90%~93.5%,浊度1.23~1.95 NTU,而次氯酸钠预氧化混凝沉淀后,蓝藻去除率56.2%~78.8%,浊度8.01~10.7 NTU,说明压力强化混凝沉淀除藻工艺是安全有效的.