Reduction and characterization of bioaerosols in a wastewater treatment station via ventilation

Bioaerosols from wastewater treatment processes are a significant subgroup of atmospheric aerosols. In the present study,airborne microorganisms generated from a wastewater treatment station(WWTS) that uses an oxidation ditch process were diminished by ventilation.Conventional sampling and detection methods combined with cloning/sequencing techniques were applied to determine the groups,concentrations,size distributions,and species diversity of airborne microorganisms before and after ventilation. There were 3021 ± 537 CFU/m3 of airborne bacteria and 926 ± 132 CFU/m3 of airborne fungi present in the WWTS bioaerosol.Results showed that the ventilation reduced airborne microorganisms significantly compared to the air in the WWTS. Over 60% of airborne bacteria and airborne fungi could be reduced after4 hr of air exchange. The highest removal(92.1% for airborne bacteria and 89.1% for fungi) was achieved for 0.65–1.1 μm sized particles. The bioaerosol particles over 4.7 μm were also reduced effectively. Large particles tended to be lost by gravitational settling and small particles were generally carried away,which led to the relatively easy reduction of bioaerosol particles0.65–1.1 μm and over 4.7 μm in size. An obvious variation occurred in the structure of the bacterial communities when ventilation was applied to control the airborne microorganisms in enclosed spaces.     

Experimental study on filtration and continuous regeneration of a particulate filter system for heavy-duty diesel engines

This study investigated the filtration and continuous regeneration of a particulate filter system on an engine test bench, consisting of a diesel oxidation catalyst（DOC） and a catalyzed diesel particulate filter（CDPF）. Both the DOC and the CDPF led to a high conversion of NO to NO2 for continuous regeneration. The filtration efficiency on solid particle number（SPN） was close to100%. The post-CDPF particles were mainly in accumulation mode. The downstream SPN was sensitively influenced by the variation of the soot loading. This phenomenon provides a method for determining the balance point temperature by measuring the trend of SPN concentration.     

FBC-DPF在柴油机颗粒物控制中的应用研究

目前针对加装FBC-DPF(燃油添加剂-柴油机颗粒捕集器)后的柴油机放特性研究较少,并且缺乏FBC-DPF对颗粒物中PAHs排放量的影响效果研究.为全面评估加装FBC-DPF后柴油机颗粒物排放特性和FBC-DPF对柴油机尾气中的颗粒物排放污染控制效果,在发动机台架上对装有FBC-DPF的重型柴油机进行了颗粒物排放特性试验.利用电子低压撞击仪(ELPI)测量加装FBC-DPF前、后柴油机颗粒物的数浓度与粒径分布,用玻璃纤维滤膜采集加装FBC-DPF前、后尾气中的固相PAHs,利用色谱质谱联用仪对加装FBC-DPF前、后尾气中的固相PAHs进行定量分析.结果表明:①加装FBC-DPF后柴油机排放的颗粒物数浓度大幅降低,FBC-DPF对尾气中颗粒物的捕集效率平均值在95%左右;②加装FBC-DPF后柴油机固相PAHs总比排放量有所降低,在大负荷区域降幅在25.0%～88.0%之间;③加装FBC-DPF前的颗粒物中位直径为30～89 nm,而加装FBC-DPF后的颗粒物中位直径为41～98 nm,平均增幅为38.2%.对于国Ⅳ及未来国Ⅴ柴油机排放法规,FBC-DPF是解决柴油机颗粒物排放的有效手段;此外,FBC-DPF可以大幅降低柴油机尾气中的有毒成分,并且能够适应高含硫量的燃油环境.     

Aerobic granules cultivated and operated in continuous-flow bioreactor under particle-size selective pressure

A novel method based on the selective pressure of particle size （particle-size cultivation method, PSCM） was developed for the cultivation and operation of aerobic granular sludge in a continuous-flow reactor, and compared with the conventional method based on the selective pressure of settling velocity （settling-velocity cultivation method, SVCM）. Results indicated that aerobic granules could be cultivated in continuous operation mode by this developed method within 14 days. Although in the granulation process, under particle-size selective pressure, mixed liquor suspended solids （MLSS） in the reactor fluctuated greatly and filamentous bacteria dominated the sludge system during the initial operation days, no obvious difference in profile was found between the aerobic granules cultivated by PSCM and SVCM. Moreover, aerobic granules cultivated by PSCM presented larger diameter, lower water content and higher specific rates of nitrification, denitrifieation and phosphorus removal, but lower settling velocity. Under long term operation of more than 30 days, aerobic granules in the continuous-flow reactor could remain stable and obtain good chemical oxygen demand （COD）, NH4^＋-N, total nitrogen （TN） and total phosphorus （TP） removal. The results indicate that PSCM was dependent on the cultivation and maintenance of the stability of aerobic granules in continuous-flow bioreactors.     

铁碳微电解法预处理聚氯乙烯(PVC)离心母液废水

采用铁碳微电解法对聚氯乙烯(PVC)离心母液废水进行预处理。分别考察反应时间、铁粉投加量、Fe/C(质量比)、pH值及曝气速率对母液废水中的COD和聚乙烯醇(PVA)去除率的影响,并在此基础上通过正交实验确定了废水COD的最佳处理条件。结果表明,最佳处理条件为:反应时间为4 h、铁粉投加量为30 g/L、Fe/C为1:2、pH值为2、曝气速率为0.8 L/min。在该条件下,废水中COD、PVA和TOC的平均去除率分别为(67%±2)%、(98%±1)%和(55%±3)%,废水的BOD/COD值从0.3提高到0.5,可生化性得到了显著提高。同时,废水中的NH3-N、浊度也在很大程度上得到了去除,出水中总铁含量也很低。     

UASB处理酒精废水耐冲击特性与颗粒污泥分析

针对UASB耐冲击能力低的问题,采用短暂冲击负荷的方法进行52 d中试研究,并考察接种絮状污泥的UASB对以污冷凝水为主要成分的酒精废水的处理效果,结果表明,UASB呈现较强耐冲击负荷能力;第49天产气速率最高,可达3.03 L/(L·d),反应器内形成了粒径0.5~1.5 mm的颗粒,电镜扫描的颗粒污泥结构致密,由多个杆状细菌形成网状结构。在夏季无保温措施、负荷冲击条件下培养颗粒污泥是可行的。     

雌激素污染对水体微生物产甲烷功能的影响

针对目前水体环境雌激素的污染形势严峻,且其对水体功能性微生物群落影响规律及机理不明等问题,选择典型天然雌激素——17β-雌二醇(E2)为主要研究对象,构建实验室厌氧水体微生态系统,分析E2污染对厌氧水体微生物活性和产甲烷功能的影响规律。结果表明,在厌氧条件下,E2污染对水体微生物群体的活性存在显著的抑制效应,对水体甲烷的产生速率亦存在规律性的影响。当水体E2浓度≤0.5 ng/L时,对水体微生物的产甲烷活性存在促进作用。当E2浓度≥1.0 ng/L时,E2污染对水体微生物的产甲烷活性存在明显的抑制效应,且随着E2浓度的升高抑制作用增强。因此,厌氧条件下,微量E2污染会影响水体微生物活性和产甲烷效应的变化,从而对水体自净功能和甲烷释放产生影响。     

雌激素污染对水体微生物反硝化作用的影响

针对世界各国水体雌激素污染日趋严重的环境问题,文章选择典型天然环境雌激素——17β-雌二醇(E2)为污染源,构建实验室厌氧水体微生态系统,分析E2污染对水体微生物反硝化速率、反硝化终端产物比例和厌氧微生物活性的影响规律。结果表明,E2污染对水体微生物的反硝化速率和活性存在显著性显著抑制作用,但反硝化终产物中N2O的比例得到明显促进。因此,在厌氧条件下,微量E2污染会影响厌氧微生物活性和反硝化作用,对水体的氮素循环产生影响。     

颗粒活性炭改性同步去除水中铅、铬的研究

为提高颗粒活性炭同步去除水中铅、铬污染物的能力,分别使用氧化铁、氧化锰、十六烷基三甲基溴化铵(HTMAB)和氯化十六烷基吡啶(CPC)制作改性活性炭(Fe Cl3-AC,Mn O2-AC,HTMAB-AC,CPC-AC)。通过测定4种改性活性炭表面的等电点p H、酸碱官能团和扫描电子显微镜图像,研究4种改性活性炭吸附效果优异并分析其中原因。结果表明:Fe Cl3-AC同步去除铅、铬效果最佳,HTMAB-AC、CPC-AC与原炭效果持平,Mn O2-AC效果还不及原炭。从等电点p H来看,Fe Cl3-AC拥有较低的等电点p H,有利于静电吸附铬酸根阴离子团;从酸性基团数目来看,Fe Cl3-AC表面拥有较多酸性官能团,有利于离子交换作用,保证了对铅离子较高的吸附效率;从SEM来看,Fe Cl3-AC上Fe Cl3负载均匀,有效改善了活性炭表面特性,有利于吸附。     

新型磁性离子交换树脂对原水中痕量有机物的去除效能研究

磁性离子交换树脂(如MIEX等)能有效去除大部分溶解性有机物(DOC)及溴离子等,减少消毒副产物(DBPs)的生成,为生产安全优质的饮用水提供新途径。而m-PGMA是一种新型的自主研发的磁性离子交换树脂材料。阐述了m-PGMA的基本特性,并利用烧杯试验,研究了其对原水中痕量有机物的去除效能,并与MIEX进行了对比试验。以原水中卡马西平、磺胺嘧啶、阿特拉津为目标痕量有机物,通过高效液相色谱法等方法进行测定。结果表明:m-PGMA对于磺胺嘧啶有明显的去除效果,在反应时间为60 min,投加量为12 mL/L时,去除率达到83%;其对卡马西平及阿特拉津的去除效果则较为低下,在反应时间为60 min,投加量为12 mL/L时,卡马西平去除率一般只有24%,阿特拉津去除率则一般不超过15%。