关于球形封头制造中几个问题的探讨

化工炼油设备由于市场的需要,发展速度很快,设备更新换代的压力急速增高,为了满足生产需要,设计单位在容器设备结构中的两端更广泛的选用球形结构．因此对化工炼油设备制造厂提出了球形封头的制造任务。     

切断位置对赤子爱胜蚓再生速度的影响

将赤子爱胜蚓从脑、生殖环部位和总体节的 1/ 2和 3/ 4的位置切断 ,得到有头无尾、无头无尾、无头有尾 3种类型 16个处理体段 ,在 (2 0± 1)℃人工气候箱中培养 ,测定其再生速度 .结果表明 ,赤子爱胜蚓切断的位置不同 ,其再生速度不同 .其中 ,脑部的存在与否 ,对再生速度没有显著的影响 .但是生殖环存在的处理比切除生殖环的处理再生速度快 ,且存活率高 .无头无尾体段再生前部和再生后部的比较表明 ,再生前部比再生后部慢 .体节的损失越少 ,再生的速度越快 .图 6表 3参 11     

顺序扫描电感耦合等离子体发射光谱法测定环境样品中的铝

电感耦合等离子体光源激发温度高达 70 0 0Ｋ ,能使难熔金属如硅、铝等元素原子或离子化 ,同时 ,能很快地破坏基体 ,减少干扰 .与ＥＴＡＡＳ法相比 ,由于顺序电感耦合等离子体发射光谱法采用连续的积分信号 ,提高了测定方法的精密度 .但是在测定铝时 ,检测限相差很大 (0 3— 1     

改进的硫酸盐-聚乙烯醇法包埋藻菌脱氮除磷研究

采用改进的硫酸盐-PVA固定化法将藻与菌混合固定。在三种不同藻菌比的情况下，固定化系统对氮去除均可达100％，但是去除速度与固定的细菌量有关，细菌量越大，对氮的去除速度越快；对磷的去除随实验进行，最大去除率逐步下降，其下降速度与固定藻的量有关，藻量越大，下降速度越慢。由此说明脱氮的主要贡献者是细菌，而藻对除磷起了主要作用。为达到有效的脱氮除磷，应适当提高固定化藻的浓度，藻菌比应大于2：1。透射电镜照片显示，在聚乙烯醇载体上，藻类的生长没有受到限制。     

蜂窝断面内循环三相生物流化床内流动状况的数值模拟

根据蜂窝断面内循环三相生物流化床内混合液的连续性方程、动量方程和能量方程,利用Fluent软件对反应器内的流动状况进行了数值模拟.采用Fluent的前处理软件Gambit完成流化床的三维模型,利用Fluent主程序解析计算,并利用后处理软件实现计算结果的显示.模拟计算结果获得了反应器内静压力、静压差的变化规律,得到了液体循环速度、气含率沿纵向及横断面的分布.     

污水厂Carrousel氧化沟溶解氧和速度分布的研究

对长沙某污水处理厂的Carrousel氧化沟进行现场测试，获得不同截面的溶解氧和速度的数据，探讨了表曝机台数、沟深、沟的长宽比、进出水位置对溶解氧和速度的影响。初步掌握了该Carrousel氧化沟内溶解氧和速度的变化规律，认为通过调节倒伞形表面曝气机，可以在沟内不同区段创造好氧与缺氧的环境，为最终实现同步硝化反硝化的高效运行做准备。     

环球扫描

柴达木盆地将建成中国最大的并网太阳能电站;城市的清洁模式;中美能否在气候与能源问题上联手协作？;白宫环保到底有几多？;什么食物有助于环保？。     

环球扫描

大气中的烟尘幽灵;耐克低调推行环保;奥巴马够环保吗？中国多城市酝酿上调水价;绿领经济分级制度。     

Photocatalytic degradation of methyl orange over ITO/CdS/ZnO interface composite films

ITO/CdS/ZnO interface composite films were successfully prepared by subsequent electrodeposition of CdS and ZnO onto indium tin oxide (ITO) glass substrates. The obtained ITO/CdS/ZnO composite films were characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), and UV-Vis spectroscopy. The photocatalytic activity of ITO/CdS/ZnO composite films were investigated using methyl orange (MO) as a model organic compound under UV light irradiation. The influence of operating parameters on MO degradation including initial concentration of MO, pH value of solution, and inorganic anion species over the composite films were examined. A blue shift of absorption threshold was observed for the ITO/CdS/ZnO film in comparison with ITO/ZnO film. ITO/CdS/ZnO composite films prepared under specific conditions showed a higher photocatalytic activity than that of ITO/ZnO films. It was also found that the photocatalytic degradation of MO on the composite filing followed pseudo-first order kinetics.     

Synthesis, characterization, and adsorption performance of Pb（Ⅱ）-imprinted polymer in nano-TiO2 matrix

Surface ion-imprinted in combination with sol-gel process was applied to synthesis a new Pb(II)-imprinted polymer for selective separation and enrichment of trace Pb(II) from aqueous solution. The prepared material was characterized by using the infrared spectra, X-ray di ractometer, and scanning electron microscopy. The batch experiments were conducted to study the optimal adsorption condition of adsorption trace Pb(II) from aqueous solutions on Pb(II)-imprinted polymer. The equilibrium was achieved in approximately 4.0 h, and the experimental kinetic data were fitted the pseudo second-order model better. The maximum adsorption capacity was 22.7 mg/g, and the Langmuir equation fitted the adsorption isotherm data. The results of selectivity experiment showed that selectively adsorbed rate of Pb(II) on Pb(II)-imprinted polymer was higher than all other studied ions. Desorption conditions of the adsorbed Pb(II) from the Pb(II)-imprinted polymer were also studied in batch experiments. The prepared Pb(II)-imprinted polymer was shown to be promising for the separation and enrichment of trace Pb(II) from water samples. The adsorption and desorption mechanisms were proposed.