有机改性膨润土在印染废水处理中的应用

膨润土是一种非常有用的非金属矿物原料,其有机改性得到的有机改性膨润土可以较好地去除印染废水中的有机污染物和色度。本文综述了有机改性膨润土的制备方法及其在印染废水处理中的应用现状。     

适用于废水处理的DSA电极的研究进展

电化学氧化技术因其具有氧化能力强、可控性高、运行费用低及对环境友好的特点,引起了人们极大的关注.处于核心地位的DSA（Dimensionally Stable Anodes）电极是电化学工作者研究的重点.Ti基氧化铅、氧化铱、锡锑氧化物等电极是目前最有研究价值的DSA电极,文章介绍了这些电极的一些最新的研究成果.     

适用于废水处理的DSA电极的研究进展

电化学氧化技术因其具有氧化能力强、可控性高、运行费用低及对环境友好的特点,引起了人们极大的关注。处于核心地位的DSA（Dimensionally Stable Anodes）电极是电化学工作者研究的重点。Ti基氧化铅、氧化铱、锡锑氧化物等电极是目前最有研究价值的DSA电极,文章介绍了这些电极的一些最新的研究成果。     

硅烷偶联剂对油页岩灰渣制备疏水性SiO_2气凝胶介孔材料的影响

以油页岩灰渣制备的水玻璃为原料,采用不同种类的硅烷偶联剂,在常压下制备了多孔疏水SiO2气凝胶。实验结果表明:在常压干燥之前,对湿凝胶进行溶剂交换-表面改性,是获得多孔气凝胶的关键。未加入硅烷偶联剂制备的气凝胶具有微孔结构;不同硅烷偶联剂制备的SiO2气凝胶均为纳米颗粒组成的中孔结构,比表面积800~980 m2/g,密度0.084~0.11 g/m3,最可几孔径9.38~10.10 nm;FT-IR分析结果表明凝胶表面Si-OH已被改性为Si-CH3,表面呈现较强的疏水性,且疏水性HMDZ>TMCS>DMDC。TG-DTA实验结果表明,改性气凝胶的热稳定性都能达到350℃,HMDZ和TMCS的气凝胶具有更高的热稳定性。     

改性小麦秸秆的制备及其对水中亚甲基蓝的吸附性能

用碳酸钾(K2CO3)溶液活化法成功地制备改性小麦秸秆。采用傅里叶红外光谱仪(FT-IR)、扫描电子显微镜(SEM)和静态吸附试验对改性前后样品的组成、形貌和吸附性能进行表征和测定,对比了秸秆改性前后的结构和组成变化。结果表明:改性后小麦秸秆半纤维素被部分溶解,出现了多孔疏松的结构。改性小麦秸秆用量、溶液p H和亚甲基蓝的浓度在一定范围内增大有助于改性小麦秸秆对亚甲基蓝吸附速率的提高,吸附类型符合Langmuir吸附等温方程模型且属于拟二级动力学吸附过程。     

Removal of polycyclic aromatic hydrocarbons from aqueous solution by raw and modified plant residue materials as biosorbents

Removal of polycyclic aromatic hydrocarbons （PAHs）, e.g., naphthalene, acenaphthene, phenanthrene and pyrene, from aqueous solution by raw and modified plant residues was investigated to develop low cost biosorbents for organic pollutant abatement. Bamboo wood, pine wood, pine needles and pine bark were selected as plant residues, and acid hydrolysis was used as an easily modification method. The raw and modified biosorbents were characterized by elemental analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The sorption isotherms of PAHs to raw biosorbents were apparently linear, and were dominated by a partitioning process. In comparison, the isotherms of the hydrolyzed biosorbents displayed nonlinearity, which was controlled by partitioning and the specific interaction mechanism. The sorpfion kinetic curves of PAHs to the raw and modified plant residues fit well with the pseudo second-order kinetics model. The sorption rates were faster for the raw biosorbents than the corresponding hydrolyzed biosorbents, which was attributed to the latter having more condensed domains （i.e., exposed aromatic core）. By the consumption of the amorphous cellulose component under acid hydrolysis, the sorption capability of the hydrolyzed biosorbents was notably enhanced, i.e., 6-18 fold for phenanthrene, 6-8 fold for naphthalene and pyrene and 5-8 fold for acenaphthene. The sorpfion coefficients （Kd） were negatively correlated with the polarity index [（O＋N）/C], and positively correlated with the aromaticity of the biosorbents. For a given biosorbent, a positive linear correlation between logKoc and logKow for different PAHs was observed. Interestingly, the linear plots of logKoc-logKow were parallel for different biosorbents. These observations suggest that the raw and modified plant residues have great potential as biosorbents to remove PAHs from wastewater.     

Mo-modified Pd/Al2O3 catalysts for benzene catalytic combustion

Mo-modified Pd/Al2O3catalysts were prepared by an impregnation method and tested for the catalytic combustion of benzene. The catalysts were characterized by N2 isothermal adsorption, X-ray diffraction（XRD）, X-ray photoelectron spectroscopy（XPS）, temperatureprogrammed desorption of NH3（NH3-TPD）, H2temperature-programmed reduction（H2-TPR）, and high-angle annular dark-field scanning transmission electron microscopy（HAADF-STEM）. The results showed that the addition of Mo effectively improved the activity and stability of the Pd/Al2O3catalyst by increasing the dispersion of Pd active components, changing the partial oxidation state of palladium and increasing the oxygen species concentration on the surface of catalyst. In the case of the Pd-Mo/Al2O3catalyst,benzene conversion of 90% was obtained at temperatures as low as 190°C, which was 45°C lower than that for similar performance with the Pd/Al2O3catalyst. Moreover, the 1.0% Pd-5% Mo/Al2O3catalyst was more active than the 2.0% Pd/Al2O3catalyst. It was concluded that Pd and Mo have a synergistic effect in benzene catalytic combustion.     

Review of the progress in preparing nano Ti02： An important environmental engineering material

TiO2 nanomaterial is promising with its high potential and outstanding performance in photocatalytic environmental applications, such as CO2 conversion, water treatment, and air quality control. For many of these applications, the particle size, crystal structure and phase, porosity, and surface area influence the activity of TiO2 dramatically. TiO2 nanomaterials with special structures and morphologies, such as nanospheres, nanowires, nanotubes, nanorods, and nanoflowers are thus synthesized due to their desired characteristics. With an emphasis on the different morphologies of TiO2 and the influence factors in the synthesis, this review summarizes fourteen TiO2 preparation methods, such as the sol-gel method, solvothermal method, and reverse micelle method. The TiO2 formation mechanisms, the advantages and disadvantages of the preparation methods, and the photocatalytic environmental application examples are proposed as well.     

改性沸石对餐厨垃圾释放的恶臭气体吸附研究

通过课题组的前期调研发现,餐厨垃圾处理过程中释放出的恶臭气体以氨气和甲硫醇居多,实验以改性沸石为吸附剂对混合恶臭气体甲硫醇和氨气进行吸附性能变化研究。利用不同浓度的磷酸溶液对沸石进行浸渍改性,考察烘干温度、浸渍浓度和浸渍时间对沸石结构和吸附性能的影响,探讨吸附机理。实验结果表明,改性之后的沸石物理结构发生了变化,烘干温度、浸渍浓度和浸渍时间对吸附效果的影响均呈现先增大后减小的趋势,沸石比表面积和表面酸含量共同作用于改性沸石对混合气体的吸附能力,其中在烘干温度为70℃、浸渍浓度为15%和浸渍时间为2.5 h条件下改性的沸石对混合气体的吸附能力最佳,此时氨气和甲硫醇的吸附量分别为224.727和4.527 mg/g,与未改性沸石相比增大了79.3%和143%。     

颗粒活性炭改性同步去除水中铅、铬的研究

为提高颗粒活性炭同步去除水中铅、铬污染物的能力,分别使用氧化铁、氧化锰、十六烷基三甲基溴化铵(HTMAB)和氯化十六烷基吡啶(CPC)制作改性活性炭(Fe Cl3-AC,Mn O2-AC,HTMAB-AC,CPC-AC)。通过测定4种改性活性炭表面的等电点p H、酸碱官能团和扫描电子显微镜图像,研究4种改性活性炭吸附效果优异并分析其中原因。结果表明:Fe Cl3-AC同步去除铅、铬效果最佳,HTMAB-AC、CPC-AC与原炭效果持平,Mn O2-AC效果还不及原炭。从等电点p H来看,Fe Cl3-AC拥有较低的等电点p H,有利于静电吸附铬酸根阴离子团;从酸性基团数目来看,Fe Cl3-AC表面拥有较多酸性官能团,有利于离子交换作用,保证了对铅离子较高的吸附效率;从SEM来看,Fe Cl3-AC上Fe Cl3负载均匀,有效改善了活性炭表面特性,有利于吸附。