基于RTP&RTCP的MPEG-4嵌入式Linux无线视频监控系统

设计一个无线视频监控系统,系统的无线传输模块采用基于IEEE802.11g无线协议,视频的编解码采用成熟的MPEG4标准,流媒体传输采用RTP/KTCP协议,实现一个由软件完成编解码的实时无线视频传输系统.     

层次分析法的改进及在安全决策中应用的研究

本文根据化工行业的特点及调研资料,建立了影响安全的层次结构模型即安全指标体系。并利用改进式层次分析法（IAHP）对该体系进行分析,得出了各个因素对安全的影响系数（权重）。     

攀钢煤化工厂废水处理系统优化改造

攀钢煤化工厂废水处理系统于2008年3月优化改造,采用A／O^2＋生物接触氧化工艺对废水进行处理。改造后系统运行处理能力和稳定性均得到提高,生化系统出水水质稳定,氨氮≤15mg／L,COD≤150mg／L。     

Immunotoxicity of bisphenol a to Carassius auratus Lymphocytes and macrophages following in vitro exposure

Bisphenol A （BPA） is the monomer component of polycarbonate plastics and classified as an endocrine disrupting chemical （EDC）. The reproductive toxicity of BPA has been extensively studied in mammals; however, relatively little information is available on the immunotoxic responses of fish to BPA. In this study, we investigated the effects of BPA on the immune functions of lymphocytes and macrophages in Carassius auratus. The effects of BPA were compared with those of two natural steroid hormones, estradiol and hydrocortisone. Proliferation of the two types of cells in response to PHA was measured using colorimetric MTT assay. Macrophage respiratory burst stimulated by Con A was measured using chemiluminescence assay. Results showed that BPA （0.054-5.4 mg/L）, estradiol （0.0002-2.0 mg/L） and hydrocortisone （5-50 mg/L） significantly induced Carassius auratus lymphocyte proliferation while higher doses of hydrocortisone （500-5000 mg/L） appeared to be inhibitory. BPA （0.005-50 mg/L）, estradiol （0.005-800 mg/L） and hydrocortisone （0.005-500 mg/L） markedly enhanced macrophage proliferation, whereas higher doses of BPA （500-1000 mg/L） appeared to inhibit cell proliferation. Furthermore, higher dosage of BPA （50 mg/L） and hydrocortisone （50 and 500 mg/L） suppressed the macrophages respiratory burst while estradiol is stimulative all the doses tested （0.05-500 mg/L）. In conclusion, BPA could have immunotoxicity to Carassius auratus and functional changes of lymphocyte and macrophage in Carassius auratus may be different between low and high dosages.     

Non-UV based germicidal activity of metal-doped TiO2 coating on solid surfaces

A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit （invitrogen, molecular probes） was used for staining the cell. The screening was carried out following a standard procedure. This included loading cell suspension to solid surface and maintaining contact for 30 min, then staining with a mixture containing dyes. The stained cells were observed using an epifluorescent microscope and photographed with a CCD camera under UV. Metal-doped TiO2 coatings on AI plates were prepared and tested for non-UV germicidal activity without using UV. It was tested using model microorganisms such as Bakers Yeast （Saccharomyces cerevisiae）, Bacillus subtilis, Pseudomonas putida, and Escherichia coli. On the basis of the germicidal activity of catalyst and the degree of damage caused to the cells, the stained cells may appear green （viable）, green with red or yellow nuclei and yellow （compromised） or red （nonviable）. According to their stained color, cells were counted to calculate the percentage of dead, live, and compromised cells. Compromised cells are cells that grow very slowly after reculturing indicating a degree of reversible cell damage. Screening the germicidal activity using this staining method is accurate and efficient, and requires less time than the culture-based method. A modification to the procedure for measuring germicidal activity of rough surfaces or fibrous coatings was developed. Both TiO2 and metal-doped TiO2 （Ag, Pt, Au, Cu） possess non-UV based germicidal activity. The germicidal activity of TiO2 was found to be related with its wetting property and can be improved by UV irradiation before testing. It is not greatly affected by contact time, indicating a fast acting germicidal activity.     

不同两性复配修饰半碳化纤维对Pb2+的吸附差异

以聚丙烯腈为原料制备半碳化纤维（SCF）,经化学和生物两性修饰后,再以海藻酸钠进行复配修饰,得到不同的两性复配修饰SCF,通过试验考察其对Pb2+的等温吸附和动力学特征,分析pH值、温度和离子强度对Pb2+吸附的影响。结果表明：供试材料对Pb2+的吸附等温线符合Langmuir和Freundlich模型,最大吸附量（qm）为495.09mmol/kg～770.56mmol/kg,两性和两性复配修饰后的SCF对Pb2+的吸附量提高了1.8%～55.6%。pH值升高有利于各供试材料对Pb2+的吸附,离子强度在0.01mol/L～0.5mol/L范围内,各供试材料对Pb2+的吸附量呈现先增加后减小的趋势,并在0.1mol/L时达到最大。热力学参数表明,Pb2+吸附是一个自发、吸热和熵增的过程。     

鄂尔多斯盆地CCS-EOR项目CO2泄漏环境风险评估

以鄂尔多斯盆地乔家洼CCS-EOR项目为例,通过工程活动指标分解及选项设计,形成涵盖油区特征、储盖层特征、工程设计、工程监管4大类20个指标的环境风险可能性判定指标体系,利用问卷调查和专家打分法,界定驱油工程环境风险可能性。结合国内外文献分析,开展项目对空气、土壤和微生物、作物、动物及人群等环境风险受体的影响程度界定,基于界定结果,按照风险评估矩阵,对该工程CO2泄漏环境风险水平的评估结论为低风险,在后期运行过程中应强化风险防范与监测。     

真空条件下高分辩质谱对不同煤质热解释放CO2分析

煤的热解机理和热解物质的形成与释放特征是煤田火灾研究领域的重要基础问题.本文以淮北不同煤种(烟煤,无烟煤,天然焦)为研究对象,在高真空条件下对样品进行热解,利用分子泵即时将热解气体产物抽入高分辨质谱检测器,在线分析热解过程中CO2的释放规律.研究结果表明:天然焦热解过程中产生的CO2,主要是样品和体系中残留以及吸附在煤微孔隙中O2分子反应生成;烟煤和无烟煤热解产生的CO2,主要是其内部含氧官能团在受热过程中分解形成,为不同煤种自燃发火防治提供资料.     

废机油滤芯资源化利用技术及应用

针对废机油滤芯的处理处置工艺,提出资源化利用技术工艺,分别从工艺路线、工艺安全保障方面对新工艺进行全面介绍,并以实际应用为案例,对比说明该技术的高效性、可靠性和安全性.     

上海隧桥工程海域生态系统健康的初步评价

随着上海经济的快速发展,一些大型海洋工程在上海海域纷纷兴建,造成了生境破碎化、生物多样性的破坏等一系列的生态损害。在分析海洋工程可能造成生态损害的同时,以上海长江口隧桥工程为例,选择2007年春季和秋季的2次生态调查数据进行研究。架桥阶段结束后,综合分析了春季与秋季的调查数据,发现各项指标均有偏向于不利的趋势。基于结构功能指标体系评价法,并利用层次分析法研究后得出上海长江口隧桥工程附近海域的综合健康指数分别为2043和2166。根据CHI≤3的情况下判断,该海域的生态健康状况属于不健康接近亚健康状态,表明河口生态系统自然属性发生明显改变,生物多样性及生态系统结构发生了一定程度的变化,主要生态服务功能出现退化或丧失。针对遭遇海洋工程破坏的生境,需要进行更多、更长时间的人工干预,并提出有效的生态保护和修复对策。