一株耐镉细菌的分离及其富集Cd的机理

从重金属镉污染土壤中筛选到一株对镉具有较强抗性和富集能力的细菌RC。经形态学观察和生理生化鉴定以及16SrDNA序列分析,RC为蜡状芽孢杆菌（Bacillus cereus）。在不同镉浓度液体培养条件下研究了菌体的生长曲线,并探讨了RC菌株对Zn、Cu的抗性,结果显示RC对不同重金属的抗性机制存在一定的差异。利用扫描电镜、透射电镜观察了镉在RC胞内外的沉积作用及分布情况,结果表明,在镉浓度为150 mg/L时菌体细胞壁及其内部可见大量的高电子密度颗粒,同时在菌体表面也有沉淀物附着。因此,胞内外沉积作用可能是该菌对高浓度镉的抗性和富集作用的重要途径。通过红外光谱探讨了RC积累镉前后细胞壁表面化学基团的变化情况,结果发现RC的细胞壁上参与积累作用的化学官能团主要有—OH、—NH、—CO和—CO—NH—等。     

上海市黄浦江水源地重金属铅、镉多介质富集特征分析

上海市黄浦江饮用水源地的水质直接影响到上海市近1 700万居民的日常生活和健康安全,因此通过现场采集及室内分析对上海市主要饮用水源地黄浦江上游干流河段表层水体,表层沉积物及支流表层水体及其周边表层土壤中重金属铅、镉类污染物的含量进行了检验。结果表明：黄浦江干流表层水体铅平均含量为3234 μg/L,镉平均含量为022 μg/L;支流水体中铅平均含量为086 μg/L,镉平均含量为013 μg/L;支流表层沉积物中铅平均含量为327 μg/g,干流平均含量为218 μg/g,周边土壤中铅含量除个别点外稳定在2022~3903 μg/g;沉积物中镉的平均含量为03 μg/g,土壤中镉含量基本在015 μg/g左右。通过分析该区域多介质中重金属铅、镉的富集特征,判断表层沉积物是该区域重金属铅、镉的主要富集介质;该区域铅污染的主要受周边土壤的淋溶冲刷作用影响;2号（斜塘与圆泄泾交汇处）,4号（竖潦泾与横潦泾交汇处）采样点区域相对于其他各采样点区域有短期、低浓度的重金属镉输入.     

科普园地

紫外线最强的时段知道一天中紫外线最强的时段,中午十点到下午两点。在这段时间,特别是晴朗高温的日子,尽量避免室外作业。另外,一年四季之中,春、夏季节阳光中紫外线含量最高。     

离子交换树脂的使用

介绍了离子交换树脂的性能、预处理,污染及复苏的办法。     

兰州市气溶胶中金属与非金属元素的污染规律

通过对兰州市空气飘尘中粗、细颗粒物上化学元素的分布规律与特征的分析 ,指出了细颗粒物 (PM2 .5 )是一些有毒有害元素的主要携带者。这是可以在肺泡沉积 ,并能直接进入血液循环 ,对人体产生危害的重要部分     

四城市空气粗、细颗粒物元素质量谱及富集特征

以武汉市 X荧光光谱分析数据为例 ,介绍了粗、细颗粒物中元素的质量谱及富集特征。并且 ,比较了广州、武汉、兰州、重庆四城市的污染元素及可能污染元素的某些富集特征     

索氏抽提法测定高吸油树脂的凝胶含量

介绍了索氏抽提法的工作原理及测定方法。确定了抽提时间及烘烤条件。通过与浸泡法的对比实验,得出用索氏抽提法测定凝胶含量更为有效、准确。     

Bioconcentration kinetics of PCBs in various parts of the lifecycle of the tadpoles Xenopus laevis

Polychlorinated biphenyls （PCBs） in Xenopus laevis have been reported only for a few congeners. Additionally, there is very little information on the ability of Xenopus laevis to bioconcentrate PCBs. To address these issues, the tadpole Xenopus laevis was exposed to Aroclor 1254 mixtures in water at room temperature for 110 d followed by an additional 110 d of nonspiked PCBs in the water for the control group. During the whole process, bioconcentration factors （BCFs） of PCBs ranged from 1180 to 15670. For most PCB congeners, the highest and lowest bioconcentrations of the kinetic curves were found to be remarkably simultaneous, respectively. All 141 PCB congeners under the same experimental conditions had no linear correlation on the lgBCF versus lgKow relationship. The relationship between lgBCFs and lgKow followed a parabolic pattern indicative of selective bioconcentration, suggesting that the kinetic curves of the PCB congeners observed in the lifecycle of the tadpoles may be concentrated due to the amphibian special species and internal metabolism. In contrast, lgBCFs for PCBs were inversely related to lgKow, suggesting that a metabolism of the higher Kow PCB congeners occurred. These results support the author＇s conclusion that the tadpole Xenopus laevis plays major roles in the bioconcentration of PCB congeners, and demonstrated that the exposure kinetic curves of PCB congeners are complex. Besides the amphibian metamorphous development, the lifecycle of the tadpole Xenopus laevis also may be of importance in determining the bioconcentration of PCB congeners.     

Thiolsulfonate functionalized polystyrene resin： Preparation and application in the isolation and identification of electrophilic mutagens

A new approach for isolation and identification of elecrtophilic mutagens from complex matrix was developed.Thiosulfonic anion was immobilized onto polystyrene beads and used as separation media.Potassium polystyryl-thiosulfonate,prepared from polystyryl- sulfonyl chloride and KHS,was observed to selectively react with model electrophilic mutagens such as alkyl halides,α-chloroketones andα-chloroesters to produce polystyryl-thiosulfonic esters.After separation from other nonreactive organic compounds,the beads then reacted with ethanethiol to produce unsymmetrical ethyl disulfides which are easily detected by GC/MS.For one mutagenic compound,only one unsymmetrical disulfide was found to contain its structure part.Thus,the structure of the parent mutagens could be deduced from that of the unsymmetrical disulfides.The degree of functionaiization of the potassium polystyryl-thiosulfonate resin was 1.11 mmol/g.Its reactivity was discussed and its recycling method was reported here.     

水性聚氨酯粘合剂性能影响因素及改性研究

聚氨酯弹性体是一类特点鲜明、性能优异的热塑性树脂,水性聚氨酯粘合剂作为其中一类,起步较晚但发展很快,综合性能提高明显,目前已具有与溶剂型相近的品质。溶剂型聚氨酯粘合剂在施胶过程中往往需要加入大量的有机溶剂以降低粘度,便于使用。有机溶剂易挥发、易燃、易爆、有毒、污染环境。近些年来,随着各国环保法对VOC（Volatile Organic Compound）含量的限制以及人们环保意识的增强,