Removal of phosphate by Fe-coordinated amino-functionalized 3D mesoporous silicates hybrid materials

Phosphate removal from aqueous waste streams is an important approach to control the eutrophication downstream bodies of water. A Fe(III) coordinated amino-functionalized silicate adsorbent for phosphate adsorption was synthesized by a post-grafting and metal cation incorporation process. The surface structure of the adsorbent was characterized by X-ray di raction, N2 adsoropion/desoprotion technique, and Fourier transform infrared spectroscopy. The experimental results showed that the adsorption equilibrium data were well fitted to the Langmuir equation. The maximum adsorption capacity of the modified silicate material was 51.8 mg/g. The kinetic data from the adsorption of phosphate were fitted to pseudo second-order model. The phosphate adsorption was highly pH dependent and the relatively high removal of phosphate fell within the pH range 3.0–6.0. The coexistence of other anions in solutions has an adverse e ect on phosphate adsorption; a decrease in adsorption capacity followed the order of exogenous anions: F?? > SO2?? 4 > NO??3 > Cl??. In addition, the adsorbed phosphate could be desorbed by NaOH solutions. This silicate adsorbent with a large adsorption capacity and relatively high selectivity could be utilized for the removal of phosphate from aqueous waste streams or in aquatic environment.     

Application of magnetic particles modified with amino groups to adsorb copper ions in aqueous solution

A magnetic adsorbent can be easily recovered from treated water by magnetic force,without requiring further downstream treatment.In this research,amine-functionalized silica magnetite has been synthesized using N-[3-(trimethoxysilyl)propyl]-ethylenediamine(TPED) as a surface modification agent.The synthesized magnetic amine adsorbents were used to adsorb copper ions in an aqueous solution in a batch system,and the maximum adsorption was found to occur at pH 5.5 ± 0.1.The adsorption equilibrium data fitted t...     

Visible light responsive N-F-codoped TiO2 photocatalysts for the degradation of 4-chlorophenol

Visible light responsive N-F-codoped TiO₂ photocatalysts exhibit a higher catalytic activity than N-doped TiO₂ for the degradation of 4-chlorophenol due to the synergistic effect of nonmetal elements.     

《中华人民共和国国民经济和社会发展第十二个五年规划纲要》发布

《中华人民共和国国民经济和社会发展第十二个五年规划纲要》日前发布。《纲要》提出,今后5年,要确保科学发展取得新的显著进步,确保转变经济发展方式取得实质性进展。要坚持把建设资源节约型、环境友好型社会作为加快转变经济发展方式的重要着力点。     

微波酸活化粉煤灰吸附酸性大红染料废水实验研究

以微波酸活化改性后的粉煤灰为吸附剂,对酸性大红染料废水进行吸附脱色处理,考察了吸附时间、pH值、吸附剂投加量等对吸附脱色效果的影响。在酸性大红染料溶液初始浓度为100 mg/L、pH=5、活化粉煤灰投加量为10 g/L吸附1 h时,活化粉煤灰对酸性大红的脱色效果较好,去除率可达96%。对实验数据进行相关数学模型拟合,结果表明微波酸活化改性后的粉煤灰吸附去除酸性大红的等温吸附平衡符合Langmuir吸附等温式,改性前后的吸附过程动力学符合准二级吸附动力学模型,线性相关系数良好。     

聚丙烯中空纤维膜吸收法烟气脱硫实验研究

采用质量分数为30%的甲基二乙醇胺(MDEA)水溶液为烟气SO2吸收液,聚丙烯(PP)中空纤维微孔膜组件为吸收器,研究吸收液温度、流量变化,气体停留时间,以及气液两相流程等操作条件对聚丙烯(PP)中宅纤维膜脱硫率的影响,研究表明30%MDEA水溶液在温度35℃,流量100mL/min的最佳试验条件下,经过一个膜吸收过程...     

La-Co-Fe-Cu/HZSM-5在尾气碳颗粒燃烧中的催化性能

采用柠檬酸络合低温浸渍法制备分子筛负载钙钛矿型复合氧化物催化剂。采用XRD、SEM和H2-TPR等手段对催化剂性能进行表征,并在微型固定床反应器中对催化剂进行活性评价。结果表明,在钙钛矿型复合氧化物中进行B位离子掺杂,可以改善催化活性,碳颗粒燃烧温度降低。在20%LaCoO3/HZSM-5催化剂中用铁离子部分取代钴离子可以改善碳颗粒的燃烧性能,取代量增加碳颗粒燃烧温度降低,但是生成CO2的选择性也降低,以20%LaCo0.2Fe0.8O3/HZSM-5为催化剂,Tig、Tm和Tf分别为256℃、399℃和403℃,但生成CO2的选择性只有72.5%。在20%LaCo1-xFexO3/HZSM-5中的钙钛矿型复合氧化物B位离子中加入铜离子后,在碳颗粒燃烧反应中生成CO2的选择性得到明显改善,Sco2提高10个单位以上。以20%LaCo0.2Fe0.6Cu0.2O3/HZSM-5为催化剂,在碳颗粒燃烧反应中生成CO2的选择性可以达到94.7%,Tig、Tm和Tf分别为242℃、427℃和445℃。     

酸析+臭氧+MBR工艺处理手机显示屏厂废水

哈威特光电技术有限公司是一家生产手机显示屏强化玻璃的企业,主要生产废水为油墨废水、研磨废水、清洗废水,其中油墨废水COD浓度高达8 000～12 000 mg/L,废水呈碱性且可生化性差;污水处理采用酸析+臭氧+MBR工艺,其中酸析法主要对油墨废水进行预处理,臭氧氧化提高综合废水的B/C比,最后进入膜生化装置MBR处理,出水能达到污水综合排放标准(GB8978-1996)的一级标准。     

模拟雨水对工业烧渣中重金属浸出特性的研究

采用《固体废物浸出毒性浸出方法—水平振荡法》(HJ557-2010)对工业固体烧渣中重金属进行浸出试验研究,并利用火焰原子吸收分光光度法分别测定了其浸出液中的铅、铬、锌、镉、铜、铁和镍等7种重金属,用可见分光光度法测定砷,考察了模拟酸雨的pH值、液固比和浸取时间等因素对烧渣中重金属的浸出试验的影响,实验结果表明烧渣中各重金属的浸出值均未超出国家标准《危险废物鉴别标准—浸出毒性鉴别》(GB5085.3-2007)中的允许值,可直接作为建筑材料或路基材料使用。     

活性炭纤维固定化菌对微囊藻毒素MC-LR的去除研究

研究了藻蓝蛋白提取过程中微囊藻毒素MC-LR的释放分布规律,并用活性炭纤维对一株微囊藻毒素降解菌株进行了固定化,考察了不同活性炭纤维预处理方法、活性炭纤维用量、pH值、温度以及MC-LR浓度对固定化藻毒素降解菌去除MC-LR的影响.结果表明,藻蓝蛋白提取过程中MC-LR主要分布在超滤滤液中,占MC-LR总含量的81.2%.固定化藻毒素降解菌去除MC-LR的效率明显高于非固定化藻毒素降解菌.藻毒素降解菌用(1+9)盐酸预处理后的活性炭纤维固定化,其去除效果最佳.MC-LR去除的最适条件为:活性炭纤维用量为10g/L,温度为35℃,pH值为8.0.固定化藻毒素降解菌对pH值,温度具有一定的耐受性,能够在pH5~pH9、10℃~35℃范围内有效地去除MC-LR.