用TiO2-Ag-改性膨润土复合催化剂光催化氧化处理染料废水

制备了一种Ti02-Ag-改性膨润土复合催化剂，用该催化剂对直接黑L-N和直接铜蓝BR染料废水进行了光催化氧化处理，取得了较好的实验效果。     

间硝基氯苯的分离及其可行性研究

探讨、分析了对、邻硝基氯苯生产废料中间硝基氯苯的可能分离方法，确定采用恒沸减压精馏法为最佳。通过大量的实验，筛选出了一种合适的恒沸剂，并确定了恒沸减压精馏的最佳工艺条件，同时还对年产200t间硝基氯苯的生产工艺进行了详细的可行性研究，结果表明，该项目投资小、能耗低、收益高，工业化前景广阔。     

超临界水氧化分散染料分子研究

在380～460℃,20-30MPa条件下,对分散红60染料分子在超临界水中氧化降解情况进行了研究.结果表明,随着反应温度,压力和氧化剂量增加,废水中有机物(以CODCr表示)去除率逐步上升.染料分子在很短时间内被氧化分解生成以苯酚、苯甲酸、邻苯二甲酸为主的中间产物.推导得出了分散红染料分子在超临界水中的降解路径.     

Enhanced adsorption of Methylene Blue from aqueous solution by chitosan-g-poly （acrylic acid）/vermiculite hydrogel composites

A series of chitosan-g-poly (acrylic acid)/vermiculite hydrogel composites were synthesized and used as adsorbents for the investigation of the e ect of process parameters such as vermiculite content, pH of dye solution, contact time, initial concentration of dye solution, temperature, ionic strength and concentration of surfactant sodium dodecyl sulfate on the removal of Methylene Blue (MB) from aqueous solution. The results showed that the adsorption capacity for dye increased with increasing pH, contact time and initial dye concentration, but decreased with increasing temperature, ionic strength and sodium dodecyl sulfate concentration in the present of the surfactant. The adsorption kinetics of MB onto the hydrogel composite followed pseudo second-order kinetics and the adsorption equilibrium data obeyed Langmuir isotherm. By introducing 10 wt.% vermiculite into chitosan-g-poly (acrylic acid) polymeric network, the obtaining hydrogel composite showed the highest adsorption capacity for MB, and then could be regarded as a potential adsorbent for cationic dye removal in a wastewater treatment process.     

Adsorption behavior of Azo Dye C. I. Acid Red 14 in aqueous solution on surface soils

Azo dyes have received considerable attention because of their association with various human health problems. The aim of the investigation is to determine the adsorption behavior ofazo dyes in aqueous solution on DG06, GSE17200, and GSE17201 soils using C. I. Acid Red 14 （AR14） as example. The experimental results indicate that the Freundlich model expresses the adsorption isotherm better than the Langmuir model and the pseudo-second-order model achieves adsorption of AR14 on the three soils well. Based on the pseudo-second-order model, the adsorption thermodynamic of AR14 on DG06 soil have been studied and the thermodynamics parameter of AGO is determined and AGO value shows the adsorption process of AR14 on DG06 is mainly physical in nature. Furthermore, the effects of temperature, pH and salinity （NaC1） on adsorption have been investigated. The decrease in pH or the increase in salinity enhances the adsorption of AR14 by DG06, GSE17200, and GSE17201.     

采用盐泥对直接染料废水脱色处理的研究

采用氯碱工业的含镁盐泥对直接染料废水进行脱色处理。以直接大红、直接深蓝和直接黑3种直接染料水溶液作为模拟染料废水,考察了盐泥活化温度、盐泥用量等对脱色效果的影响,重点分析了吸附动力学特征,并对盐泥的循环再生利用进行了初步考察。经400℃煅烧活化的盐泥对直接大红、直接深蓝和直接黑3种直接染料均有很高的脱色效果,直接大红、直接深蓝和直接黑3种染料在盐泥吸附剂上的吸附动力学过程符合拟二级动力学方程,20min左右时,吸附接近平衡。饱和吸附的盐泥经过煅烧后可以循环使用。研究结果为盐泥的综合利用提供了一种新途径。     

电-Fenton反应处理蒽醌类染料废水的试验研究

应用电-Fenton反应处理蒽醌类染料(活性艳蓝K-3R),结果表明,在该条件下,可有效降解含该染料的废水.     

微电解＋Fenton试剂预处理染料废水工程实例研究

采用微电解＋Fenton试剂预处理是有效地解决染料废水不可生化性和色度的一种简单方便技术。通过工程实践证明,采用微电解＋Fenton预处理染料废水能够提高其可生化性,降低色度,联用传统的生化处理技术,处理后的染料废水能够实现达标排放,污染物COD的平均去除率达97%以上。该工艺处理系统运行2年,效果明显、稳定可靠。     

染料行业节水减污措施探讨

染料行业发展迅速,但随着节能减排要求的提高,问题也愈暴露,甚至影响到染料工业的生存。针对染料行业水耗高、废水产生量大的严峻环境问题,提出节水减污的工作思路。通过推行清洁生产,找出水耗高、污染物产生量大的环节,结合企业实际生产情况,从染料生产的技术工艺、设备、水回收利用、加强管理、结合一定的末端治理5个方面,探讨节水减污的措施,争取做到源头节水,将污染物最大程度地消灭在生产过程中,做到废水的回收利用,使染料行业能够可持续发展下去。